The outdoor swimming pool in Sömmerda will be completely modernized as part of a general refurbishment and the technical facilities will be renovated according to the latest technologies and the recognized rules of technology. The treatment plants for the new stainless steel pool facilities, swimmers 'pools, jumper pools, non-swimmers' pools and children's pools including water playground will be rebuilt (the delivery and installation of the stainless steel tanks are not covered by this lot). In a newly built underground pump room, the raw water storage and pump technology for the circulation system and attractions are installed. The filter technology will be installed in a new ground floor building.

The outdoor swimming pool in Sömmerda will be completely modernized as part of a general refurbishment and the technical facilities will be renovated according to the latest technologies and the recognized rules of technology. The treatment plants for the new stainless steel pool facilities, swimmers 'pools, jumper pools, non-swimmers' pools and children's pools including water playground will be rebuilt. In a newly built underground pump room, the raw water storage and pump technology for the circulation system and attractions are installed. The filter technology will be installed in a new ground floor building.

Plant layout:

Annex 1 Float, Springerbecken

Flocculation - multi-layer filtration with adsorptive carbon - chlorination

Annex 2 Non swimmer pool

Flocculation - multi-layer filtration with adsorptive carbon - chlorination

Annex 3 children's pool, water playground

Flocculation - multi-layer filtration with adsorptive carbon - chlorination

For the resulting rinsing waste water is introduced into the sewer after a settling time.

The product bath water technology includes the following services as a new installation:

- 5 pieces of vacuum filter 3 m 2 .

- 5 pieces of vacuum filter 2 m 2 .

- 10 pieces circulating pumps with integr. Hair and fiber catcher, power of 60-350 m 3 / h as circulating and attraction pump (all pumps, also listed below, are equipped with PM motors),

- 11 pieces of block pumps, capacity of 60-180 m 3 / h as filtrate and rinse water pump, PM motor,

- 1 piece wastewater pump with cutting wheel, power 6 m 3 /H,

- 1 piece sewage double lifting plant, power 2x 30 m 3 /H,

- 1 piece purge air and attraction blower, power 240 m 3 /H,

- 1 piece compressed air system consisting of 1 double compressor unit, refrigeration dryer etc, 15 valve terminals,

- 2 PP containers for rinsing and rinsing waste water, each 30 m 3 useful volume,

- 80 pieces of concrete components as wall duct PVC-U,

- 200 pieces butterfly valves DN 50-400, locking handle, fine adjustment, pneum. single acting, pneum. double acting,

- 2,600 m pipeline PE-HD DN 50-400, including form and connection parts, fixing structure, buried underground and in technical rooms,

- 900 m pipeline PVC, PN 16, DN 20-350, including form and connection parts, mounting structure,

- 4 heat exchangers for pool water heating,

- equipment chlorine gas room for 9 pieces of chlorine gas bottles,

- 5 pieces dosing device chlorine gas for disinfection pool water and rinse water,

- 5 piece (s) Measurement and Control Analytics Pool water, rinse water,

- 6 pieces dosing device for flocculation and pH correction,

- 8 pieces of water toys for water playground,

- 2 pieces control cabinet bath water technology, pump room, filter hall,

- electrical installation for all parts of the bath water technology,

- 5 pieces outdoor showers stainless steel, cold water.