The object of the order is the delivery and installation of photovoltaic installations for the production of electricity in single-family residential buildings and public utilities, which is implemented under the project “Ekopartners for solar energy Lesser Poland”.

1. Supply and installation of photovoltaic installations for the production of electricity for municipalities of the Tarnów Subregion, including in particular:

1) supply and assembly based on the technical documentation of 269 sets of photovoltaic installations, together with the construction adapted to the assembly site, including for municipalities:

— Chewszów,

— Lisia Góra,

— Frog,

— Tarnów,

— Wierzchosławice,

— Zakliczyn,

— Ryglice,

— Tuchów,

- The thromnik.

2) delivery and installation of structures under PV modules,

3) supply and assembly of new PV modules factory,

4) supply and assembly of new DC/AC inverters/ inverters,

5) making excavations in the ground to the required depth, in the event that the photovoltaic panels are located outside the building where the main switchboard will be located at a distance of up to 25 meters in a straight line,

6) layout of cable routes, grounding and cables from PV panels to inverter and wires from inverter to electric switchgear

7) installation of the switchgear for photovoltaics (DC and AC side) with installation grounding (ground resistance value should reach <10 Ohm),

8) DC switchgear equipment (surge protector, DC fuse switch)

9) AC switchgear equipment (fuse switch, surge protector, overcurrent switch)

10) performing installation tests and verifying the correct operation of the apparatus,

11) the commissioning of the system and adjustments,

12) measurements of electrical installations required by appropriate regulations,

13) configuration of all inverters, connection to the user's Internet network and integrate into a single system to monitor energy production, ecological benefits and control the operation of solar installations from the system. The system must be available for desktop and mobile devices on iOS and Android, system monitoring devices should be able to communicate with a dedicated server on which the intended data will be saved,

14) the training of facility managers and users from the operation and use of solar installations carried out in the framework of this proceeding,

15. Documentation of notification of connection of microinstallations to the electricity grid of the regional DSO,

16) manufacture of the necessary mounting holes and culverts for the introduction of equipment,

17) sealing holes and mounting culverts after introduction.

18. Other elements included in Annex 1 to the SWZ and the Draft Agreement constituting Annex No 2 to the SWZ.

2. The detailed scope of the work (Description of the Order Subject) is contained in Annex No 1 to SWZ - Technical documentation of photovoltaic installations.

1. Supply and installation of photovoltaic installations for the production of electricity for municipalities of the Wielicki Subregion, including in particular:

1) supply and assembly based on the technical documentation held by the Ordering Authority 184 sets of photovoltaic installations, including for municipalities:

— Niepolomice,

— Wieliczka,

— Thinking,

— Gdów,

— Bishopice,

— Iodinator,

- Rabka Zdrój.

2) delivery and installation of structures under PV modules,

3) supply and assembly of new PV modules factory,

4) supply and assembly of new DC/AC inverters/ inverters,

5) making excavations in the ground to the required depth, in the event that the photovoltaic panels are located outside the building where the main switchboard will be located at a distance of up to 25 meters in a straight line,

6) layout of cable routes, grounding and cables from PV panels to inverter and wires from inverter to electric switchgear

7) installation of the switchgear for photovoltaics (DC and AC side) with installation grounding (ground resistance value should reach <10 Ohm),

8) DC switchgear equipment (surge protector, DC fuse switch)

9) AC switchgear equipment (fuse switch, surge protector, overcurrent switch)

10) performing installation tests and verifying the correct operation of the apparatus,

11) the commissioning of the system and adjustments,

12) measurements of electrical installations required by appropriate regulations,

13) configuration of all inverters, connection to the user's Internet network and integrate into a single system to monitor energy production, ecological benefits and control the operation of solar installations from the system. The system must be available for desktop and mobile devices on iOS and Android, system monitoring devices should be able to communicate with a dedicated server on which the intended data will be saved,

14) the training of facility managers and users from the operation and use of solar installations carried out in the framework of this proceeding,

15. Documentation of notification of connection of microinstallations to the electricity grid of the regional DSO,

16) manufacture of the necessary mounting holes and culverts for the introduction of equipment,

17) sealing holes and mounting culverts after introduction.

18. Other elements included in Annex 1 to the SWZ and the Draft Agreement constituting Annex No 2 to the SWZ.

2. The detailed scope of the work (Description of the Order Subject) is contained in Annex No 1 to SWZ - Technical documentation of photovoltaic installations.

1. Supply and installation of photovoltaic installations for the production of electricity for municipalities of the Olkusz Subregion, including in particular:

1) supply and assembly based on the technical documentation held by the Ordering Authority 146 sets of photovoltaic installations, including for municipalities:

— Bukowno,

— Keys,

— Krzeszowice,

— Olkusz,

— Wolbrom,

Three-pregnancies

2) delivery and installation of structures under PV modules,

3) supply and assembly of new PV modules factory,

4) supply and assembly of new DC/AC inverters/ inverters,

5) making excavations in the ground to the required depth, in the event that the photovoltaic panels are located outside the building where the main switchboard will be located at a distance of up to 25 meters in a straight line,

6) layout of cable routes, grounding and cables from PV panels to inverter and wires from inverter to electric switchgear

7) installation of the switchgear for photovoltaics (DC and AC side) with installation grounding (ground resistance value should reach <10 Ohm),

8) DC switchgear equipment (surge protector, DC fuse switch)

9) AC switchgear equipment (fuse switch, surge protector, overcurrent switch)

10) performing installation tests and verifying the correct operation of the apparatus,

11) the commissioning of the system and adjustments,

12) measurements of electrical installations required by appropriate regulations,

13) configuration of all inverters, connection to the user's Internet network and integrate into a single system to monitor energy production, ecological benefits and control the operation of solar installations from the system. The system must be available for desktop and mobile devices on iOS and Android, system monitoring devices should be able to communicate with a dedicated server on which the intended data will be saved,

14) the training of facility managers and users from the operation and use of solar installations carried out in the framework of this proceeding,

15. Documentation of notification of connection of microinstallations to the electricity grid of the regional DSO,

16) manufacture of the necessary mounting holes and culverts for the introduction of equipment,

17) sealing holes and mounting culverts after introduction.

18. Other elements included in Annex 1 to the SWZ and the Draft Agreement constituting Annex No 2 to the SWZ.

2. The detailed scope of the work (Description of the Order Subject) is contained in Annex No 1 to SWZ - Technical documentation of photovoltaic installations.

1. Supply and installation of photovoltaic installations for the production of electricity for municipalities in the Miechów Subregion, including in particular:

1) supply and assembly based on the technical documentation held by the Contracting Authority 176 sets of photovoltaic installations, including for municipalities:

— Gołcza,

— Kharsznica,

— Miechów,

— Weakoszów,

— Racławice,

— Goats,

- Prince Great.

2) delivery and installation of structures under PV modules,

3) supply and assembly of new PV modules factory,

4) supply and assembly of new DC/AC inverters/ inverters,

5) making excavations in the ground to the required depth, in the event that the photovoltaic panels are located outside the building where the main switchboard will be located at a distance of up to 25 meters in a straight line,

6) layout of cable routes, grounding and cables from PV panels to inverter and wires from inverter to electric switchgear

7) installation of the switchgear for photovoltaics (DC and AC side) with installation grounding (ground resistance value should reach <10 Ohm),

8) DC switchgear equipment (surge protector, DC fuse switch)

9) AC switchgear equipment (fuse switch, surge protector, overcurrent switch)

10) performing installation tests and verifying the correct operation of the apparatus,

11) the commissioning of the system and adjustments,

12) measurements of electrical installations required by appropriate regulations,

13) configuration of all inverters, connection to the user's Internet network and integrate into a single system to monitor energy production, ecological benefits and control the operation of solar installations from the system. The system must be available for desktop and mobile devices on iOS and Android, system monitoring devices should be able to communicate with a dedicated server on which the intended data will be saved,

14) the training of facility managers and users from the operation and use of solar installations carried out in the framework of this proceeding,

15. Documentation of notification of connection of microinstallations to the electricity grid of the regional DSO,

16) manufacture of the necessary mounting holes and culverts for the introduction of equipment,

17) sealing holes and mounting culverts after introduction.

18. Other elements included in Annex 1 to the SWZ and the Draft Agreement constituting Annex No 2 to the SWZ.

2. The detailed scope of the work (Description of the Order Subject) is contained in Annex No 1 to SWZ - Technical documentation of photovoltaic installations.