Engineering design services for mechanical and electrical installations for buildings | Tenderlake

Engineering design services for mechanical and electrical installations for buildings

Contract Value:
-
Notice Type:
Contract Notice
Published Date:
18 July 2023
Closing Date:
15 August 2023
Location(s):
DE241 Bamberg, Kreisfreie Stadt (DE Germany/DEUTSCHLAND)
Description:
Refurbishment of the quarter at the New Town Hall Bamberg Maximilliansplatz 3, Hauptwachstr. 1, 3, 7, 9 and 16 - Planner selection procedure for ELT specialist planning

Sectoral planning ELT according to HOAI 2021 § 55 Part 4, Section 2 Service phase 1-9

Specialist planning ELT Maximiliansplatz 3, Hauptwachstr. 1, 3, 7 and 9

The project "Quartier am Neuen Rathaus" consists of the

closed building ensemble between Maxplatz and

Front trench.

The quarter is a cityscape-defining

Ensemble along the Baroque axis in the center of the

UNESCO World Heritage Site, which is a UNESCO World Heritage Site.

Ensemble protection as well as in parts the individual monument protection

subordinates.

The buildings concerned are essentially classified as

Administrative location of the city administration. In the

Parts of the building along Hauptwachstraße are in the

Ground floor housed commercial units.

The aim of the general renovation is to repair the

Building envelope and building statics, including energy

Improvements, the repair of the room shells, the

Modernization of the sanitary facilities as well as the new installation

building technology, including digital media, and

state-of-the-art building management system. In addition, the buildings are on

check fire safety requirements and ensure accessibility,

as far as possible. The uses are intended to:

be retained as far as possible, the inner courtyards require

an upgrade and redesign. The existing

Spatial concept of the administrative unit Maxplatz is with regard to

of citizen-friendliness and, if necessary, to optimize it.

The ensemble is located in the heart of the Bamberg region

Downtown. Particular attention is paid to construction logistics and

Public relations. Also, it is necessary to use the

Use of the commercial units for as short a time as possible

and maintain operations.

In addition, the restructuring of the administrative unit should be carried out as far as possible

in sections, if necessary while maintaining the

administrative operation.

The measure is a high-level

Funding project. A special requirement for the project is

the reference to the silver certificate according to BNB

(Sustainable Building Rating System). For this purpose, the

Two of the following objectives have been defined as a measure of success:

1. Risks to the local environment:

The use of construction products which, due to their

pollutant levels pose a potential risk to the environment, and

health, should already be in the planning phase

can be reduced or avoided. In order to reduce the risks for the local

Keeping the environment as low as possible is a careful selection

low-pollutant and low-emission building products.

The following quality levels are sought:

- for newly introduced materials, quality level 5

- for existing materials, quality level 4

A comprehensive investigation of contaminated sites has already been carried out.

Made.

2. Sustainable material extraction/biodiversity:

For this criterion, at least quality level 3 should be achieved

become. For this purpose, at least 80% of the wood used,

Wood products and/or wood-based materials, the proof of

Use of wood products from sustainable sources

Forestry. this is done by submitting a

recognized certificate and the associated CoC certificate

proven.

Note: Parts of the façade of the property Maxplatz 3 are

already partially renovated. Here, a repair of the

Natural stone components and façade plasters as well as a window replacement

or a restoration repair. The quality is

to be continued accordingly.

Time schedule:

2022/23: Preliminary investigations and first work phases,

Invitation to tender for specialist planners

2024/2025: Work planning and tendering

2025-2028: Construction period

2029: Final invoices and proof of use

At the same time as the present call for proposals, it is intended that the

Specialist planning of the technical building equipment as well as

to put the structural design out to tender so that a timely

Project start can be guaranteed.

The following documents are already available:

1. Planunterlangen

a. Map M 1:1000

b. General plan

c. Deformation-appropriate building measurement (floor plans,

Views, sections)

d. Spartenpläne

2. Fundamentals of the building and target requirements of the

Renovation

a. Explanatory report

b. Description of the building (from the funding sketch)

c. Presentation on the condition of the building and the

Planungszielen

d. Target agreement table according to BNB

3. Preliminary investigations

a. Tragwerksgutachten

b. Bauforschungsunterlagen

c. Schadstoffgutachten

Further preliminary investigations have already been commissioned and will be carried out.

expected to be available by the end of the year. These

Include:

d. Tragwerksgutachten (Hauptwachstraße 7, 9)

e. Building Research (Hauptwachstraße 7, 9)

f. Inventories of fire protection (all buildings)

g. Building physics report (all buildings)

h. Species protection (all buildings)

Fachplanung ELT Hauptwachstr. 16

The project "Quartier am Neuen Rathaus" consists of the

closed building ensemble between Maxplatz and

Vorderer Graben and the solitary building of the former

Hauptwache (Hauptwache 16).

The quarter is a cityscape-defining

Ensemble along the Baroque axis in the center of the

UNESCO World Heritage Site, which is a UNESCO World Heritage Site.

Ensemble protection as well as in parts the individual monument protection

subordinates.

The building at Hauptwachstraße 16 is located independently of the other buildings on Hauptwachstraße opposite the ensemble and, together with it, forms the entrance to the baroque axis of the old town. It is the former main station and is a three-sided free-standing, two-storey, late Baroque sandstone ashlar building built in 1774 with a hipped mansard roof on one side and a central risalit with a triangular gable.

The buildings concerned are essentially classified as

Administrative location of the city administration. In the

Parts of the building along Hauptwachstraße are in the

Ground floor housed commercial units.

The aim of the general renovation is to repair the

Building envelope and building statics, including energy

Improvements, the repair of the room shells, the

Modernization of the sanitary facilities as well as the new installation

building technology, including digital media, and

state-of-the-art building management system. In addition, the buildings are on

check fire safety requirements and ensure accessibility,

as far as possible. The uses are intended to:

be retained as far as possible, the inner courtyards require

an upgrade and redesign. The existing

Spatial concept of the administrative unit Maxplatz is with regard to

of citizen-friendliness and, if necessary, to optimize it.

The ensemble is located in the heart of the Bamberg region

Downtown. Particular attention is paid to construction logistics and

Public relations. Also, it is necessary to use the

Use of the commercial units for as short a time as possible

and maintain operations.

In addition, the restructuring of the administrative unit should be carried out as far as possible

in sections, if necessary while maintaining the

administrative operation.

The measure is a high-level

Funding project. A special requirement for the project is

the reference to the silver certificate according to BNB

(Sustainable Building Rating System). For this purpose, the

Two of the following objectives have been defined as a measure of success:

1. Risks to the local environment:

The use of construction products which, due to their

pollutant levels pose a potential risk to the environment, and

health, should already be in the planning phase

can be reduced or avoided. In order to reduce the risks for the local

Keeping the environment as low as possible is a careful selection

low-pollutant and low-emission building products.

The following quality levels are sought:

- for newly introduced materials, quality level 5

- for existing materials, quality level 4

A comprehensive investigation of contaminated sites has already been carried out.

Made.

2. Sustainable material extraction/biodiversity:

For this criterion, at least quality level 3 should be achieved

become. For this purpose, at least 80% of the wood used,

Wood products and/or wood-based materials, the proof of

Use of wood products from sustainable sources

Forestry. this is done by submitting a

recognized certificate and the associated CoC certificate

proven.

Note: Parts of the façade of the property Maxplatz 3 are

already partially renovated. Here, a repair of the

Natural stone components and façade plasters as well as a window replacement

or a restoration repair. The quality is

to be continued accordingly.

Time schedule:

2022/23: Preliminary investigations and first work phases,

Invitation to tender for specialist planners

2024/2025: Work planning and tendering

2025-2028: Construction period

2029: Final invoices and proof of use

At the same time as the present call for proposals, it is intended that the

Specialist planning of the technical building equipment as well as

to put the structural design out to tender so that a timely

Project start can be guaranteed.

The following documents are already available:

1. Planunterlangen

a. Map M 1:1000

b. General plan

c. Deformation-appropriate building measurement (floor plans,

Views, sections)

d. Spartenpläne

2. Fundamentals of the building and target requirements of the

Renovation

a. Explanatory report

b. Description of the building (from the funding sketch)

c. Presentation on the condition of the building and the

Planungszielen

d. Target agreement table according to BNB

Download full details as .pdf
The Buyer:
Stadt Bamberg
CPV Code(s):
71321000 - Engineering design services for mechanical and electrical installations for buildings