Supply, delivery, assembly, commissioning and training to users of four vector network analyzers for the needs of CEA Le Ripault.
Equipment n°1 and 2 portable with HF connectors type N femaleThe analyzers (n°1 and 2) must be in portable format with a female N-type HF connector and with the following specifications:
o Frequency range from 30 kHz to 18 GHz
o Amplitude resolution at least 0.01 dB
o Phase resolution at least 0.01°
o SWR resolution at least 0.01°
Equipment n°3 standard format 2 ports with HF connectors type 2.92 mm male• The analyzer (n°3) must be in the standard 2-port format with a 2.92 mm male type HF connector and with the following specifications:
o Frequency range from 100 kHz to 26.5 GHz
o Specified dynamic range greater than 120 dB in the range 100 MHz to 15 GHz
o Transmission amplitude uncertainty of 0.05 dB between 0 dB and 20 dB in the range 100 MHz to 15 GHz
o Phase uncertainty in transmission of 0.4° between 0 dB and 20 dB in the range 100 MHz to 15 GHz
o Directivity greater than 46 dB in the range 100 MHz to 15 GHz
o Power range from -30 dBm to +6 dBm in the range 100 MHz to 15 GHz
o Noise level below -118 dBm in the range 100 MHz to 15 GHz
Equipment n°4 including 2 microwave ports• The analyzer (No. 4) must be delivered with 2 microwave ports (1.87 mm) with "savers" up to 67 GHz and with the following specifications:
o Minimum frequency range from 10MHz to 67GHz,
o Specified dynamic range greater than 95 dB in the range 100 MHz to 67 GHz, any option to improve the measurement dynamic range will be highly appreciated
o Higher Directivity ) 37 dB specified in the range 100 MHz to 67 GHz,
o Minimum power range from -10 dBm to + 5 dBm,
o A specified noise level of less than at least -100 dBm,
o Supply of a set of cable to make measurements on the ports,
o Supply of a manual calibration kit with a calibration certificate,
o Supply of an automatic calibration kit with a calibration certificate