structural work

1 piece of construction site equipment

1 piece demolition appendix building

approx. 2m³ demolition of masonry

approx. 65m² PMBC sealing

approx. 20m³ excavated excavation pit homogeneous range A2 to A5

approx. 30m³ excavated excavation pit homogeneous range A6 to A7

approx. 25 kg 2000 sewer pipe DN100 to DN200

1 piece plant and assembly planning concrete and reinforced concrete work

approx. 1,440m² in-situ concrete cleanliness layer C 12/15

approx. 120m² allowance for cleanliness layer C 12/15 in the incline

approx. 980m³ in-situ concrete floor slab, WU concrete

approx. 980m³ in-situ concrete floor slab, WU concrete in the inclined course

approx. 660m³ in-situ concrete exterior walls, WU concrete

approx. 535m³ in-situ concrete interior walls

approx. 1,770 m³ in-situ concrete ceiling tiles

approx. 1,390m² formwork external walls

approx. 2,070m² formwork interior walls

approx. 5,400m² formwork ceiling tiles

Approximately 0.000m² SB3 display formwork allowance

approx. 19 pieces of precast concrete stair run

Approx. 550m earth cable V4A steel

approx. 2,500m potential equalization in concrete components, galvanised steel

approx. 2,360m² heating/cooling circuits

Approx. 2,360 m² tube carrier mats

approx. 1,680m distribution line according to Tichelmann 40mm

approx. 480m² KSL-R (P) - masonry 11.5 to 24cm

approx. 90 pieces creation of recesses A = 0.10 to 1.00m²

1 piece plant and assembly planning sealing measures

approx. 2,100 m² FBV system

approx. 120m² PMBC sealing

approx. 660m² insulation exterior walls, XPS, 120mm