The subject of the contract is the supply and installation of photovoltaic installations and heat pumps in the following municipalities: Nowy Targ, Nowy Targ, Czorsztyn, Łapsze Niżne, Brzesko, Alwernia, Babice, Chrzanów, Libiąż and Trzebinia, which is implemented as part of the project "Installation of renewable energy sources installations in the municipalities: Nowy Targ, Nowy Targ City, Czorsztyn, Łapsze Niżne, Brzesko, Alwernia, Babice, Chrzanów, Libiąż and Trzebinia".

1. Delivery and installation of photovoltaic installations in the following municipalities: Nowy Targ, Nowy Targ, Czorsztyn, Łapsze Niżne, Alwernia, Babice, Chrzanów, Libiąż and Trzebinia, including:

1) delivery and assembly based on the technical documentation held by the Ordering Party of 170 sets of photovoltaic installations, on residential and public buildings together with a structure adapted to the place of installation,

2) execution in each location, not later than 60 days after the signing of the contract with the Ordering Party, inventory of buildings from which the Protocols of Assembly Agreements will be drawn up with scaleable graphics program, roof projections with location module in photovoltaic and/or terrain projection with a ground mounting place and the course of the DC and AC cable route.

3) delivery and assembly of structures for PV modules,

4) delivery and assembly of brand new, not older than 2021 PV modules,

5) delivery and assembly of brand new inverters / DC / AC inverters not older than from 2021,

6) the execution of excavations in the ground to the required depth, in the event that the photovoltaic panels are located outside the building where the main switchboard will be located up to 25 meters in a straight line, above 25 meters the excavation is carried out by the resident,

7) arrangement of cable routes, grounding and cables from PV panels to inverter and wires from inverter to electrical switchboard

8) installation of the switchgear for photovoltaics (DC and AC side) with installation grounding (ground resistance value should reach <10 Ohm),

9) DC switchboard equipment (surge protector, DC fuse disconnector)

10) AC switchboard equipment (fuse disconnector, surge protector, overcurrent switch)

11) perform installation trials and check the correct operation of the apparatus,

12) the launch of the layout and regulations,

13) measurements of electrical installations required by appropriate regulations,

14) configuration of all inverters, connection to the user's internet network (in the absence of a fixed Internet connection at the location of the inverter, the cost of bringing coverage is covered by the User, in the case of complete absence of the Internet network at the User the requirement is equipping the User with a module that allows you to connect to the internet in the future.) and integration with a single system to monitor energy production, ecological benefits and control the work of solar installations from within the system. The system must be available for desktop and mobile devices on the iOS and Android platform, the system monitoring devices should be able to communicate with a dedicated server where the intended data will be stored,

15) training of facilities management persons and users from the operation and use of photovoltaic installations carried out in the framework of this procedure,

16) execution of documentation of the notification of the connection of microinstallations to the electricity grid of the regional OSD,

17) execution of the necessary mounting holes and culverts for the introduction of equipment,

18) sealing of mounting holes and culverts after introduction.

2. Detailed scope of work (Description of the Order Subject) is contained in Annex No 1.1 to SWZ - Technical documentation of PV installations (Part 1 of the order).

1. Delivery and installation of heat pumps in the following municipalities: Nowy Targ, Nowy Targ City, Czorsztyn, Łapsze Niżne, Babice, Chrzanów, Libiąż, including:

1) delivery and installation based on the technical documentation held by the Ordering Party of 142 pieces of heat pumps in residential and public buildings together with accessories,

2) installation of air ducts,

3) connection of the c.w.u. (heat pump) heater to the existing installation c.w.u., circulation c.w.u. and c.,

4) installation of fittings, equipment and other elements according to the technological scheme,

5) installation of the control system,

6) the manufacture of rinsing and pressure tests of the installation,

7) filling of the installation,

8) commissioning of the installation,

9) training users on the principles of proper operation of the heat pumps performed together with the development of detailed operating instructions and their transmission to users,

10) replenishment and sealing of cavities after the passages of the ducts, the execution of cold, warm c.o. and electrical water systems necessary for connection to the designed system.

2. The detailed scope of work (Description of the Subject of the Order) is included in Annex No. 1.2 to swz - Technical documentation of the heat pump installation (part 2 of the order).