40 W CW amplifier - dish and accessories in the 26.5 - 40 GHz band.
Amplifier and associated components constituting an emission chainStation 10: 40 W amplifier - CW - [26.5 - 40 GHz].
Station 20: waveguides and twists composed of:
- two rigid waveguides,
- two flexible waveguides,
- a rigid 90º twist guide.
Post 30: guide-coaxial transitions.
Post 40: two horn antennas.
Parabolic antennaThe antenna must cover the 26.5 - 40 GHz band:
- its primary source must be able to withstand the output power of the amplifier of station 10, the maximum value of which on the 26.5 - GHz band is estimated at 60 W;
- gain greater than or equal to 35 dB on the 26.5 - 40 GHz band;
- level of the secondaries at least -20 dBc of the main lobe;
- nominal input impedance: 50 Ohms;
- standing wave ratio: less than or equal to 2;
- primary source connection: WR-28 waveguide horn;
- permitted rectilinear polarization H or V depending on the orientation of the primary source.
Coaxial cables - coaxial transitions and 50 Ohm terminationsSupply:
- ten 2.92 mm (MM) coaxial cables fitted at each end with a male K connector;
- ten coaxial transitions;
- two 50 Ohm terminations.