1. The subject of the order is construction works consisting in the execution of:
• Renovation of provincial road No. 816 from km 17+408 to km 19+350. The section in the town of Kodeń, 1.942 km long.
CPV code: 45233200-1
2. The scope of works includes:
-measuring robots
-dismantling the surface of concrete paving stones and concrete edges and curbs
with concrete bench
-milling asphalt surfaces
-setting concrete curbs 20x30 on a concrete bench with resistance
-setting concrete edging 30x8 on a concrete bench with resistance
-vertical adjustment of gratings and manholes for channel manholes
-execution of linear drainage with sewage covered with polymer concrete with cast iron grate on
concrete bench
-making the surface of concrete paving stones
-cleaning and sprinkling of structural layers
-making a leveling layer of asphalt concrete
-making a binding layer of asphalt concrete, thickness 4 cm
-making a wear layer
1. The subject of the order is construction works consisting in the execution of:
• Renovation of provincial road No. 816 from km 17+408 to km 19+350. The section in the town of Kodeń, 1.942 km long.
CPV code: 45233200-1
2. The scope of works includes:
-measuring robots
-dismantling the surface of concrete paving stones and concrete edges and curbs
with concrete bench
-milling asphalt surfaces
-setting concrete curbs 20x30 on a concrete bench with resistance
-setting concrete edging 30x8 on a concrete bench with resistance
-vertical adjustment of gratings and manholes for channel manholes
-execution of linear drainage with sewage covered with polymer concrete with cast iron grate on
concrete bench
-making the surface of concrete paving stones
-cleaning and sprinkling of structural layers
-making a leveling layer of asphalt concrete
-making a binding layer of asphalt concrete, thickness 4 cm
-making a wear layer of asphalt concrete, thickness 4 cm
-implementation of road markings
3. The detailed scope of works is included in the technical documentation, Technical Specifications for the Execution and Acceptance of Construction Works and in the bill of quantities constituting an auxiliary part of determining the number of works
4. The bill of quantities shall be ancillary. Before submitting the bid, the Contractor is obliged to carefully check the number of works with technical documentation. Due to the fact that the contract for works is a lump-sum contract, in the event of a larger number of works occurring during the execution of works in any item, it will not be considered as additional work with a demand for additional remuneration.
Any lack of certain works necessary to be performed on the basis of technical documentation in the bill of quantities or in the tender estimate does not release the Contractor from the obligation to perform them on the basis of technical documentation at the contractual price...