Acquisition of mowing and attachments for dam, dike and water maintenance.
Delivery includes four two-axle mowers with an output of approx. 55 kW and a low centre of gravity for working on extreme slopes, a comparable mower tractor with an output of approx. 85 kW, an automatic crawler mower with a working width of approx. 1,200 mm as well as attachments to existing machines stump grinder, boom mower, weed brush, loader wagon and trailer shredder with self-propelled drive.
Delivery of 1 two-axle mower with a power of approx. 55 kW and a low centre of gravity for working on extreme slopes, hydrostat for front and rear attachments.
Slope mower with working width of approx. 1,200 mm, weight of max. 500 kg and high-grass mulcher, use on embankments up to an inclination of 50 degrees
Trailer shredder with self-propelled drive, single-axle chassis 80 km/h and for trunk diameter with at least 140 mm
Delivery of 1 two-axle mower with a power of approx. 55 kW and a low centre of gravity for working on extreme slopes, hydrostat for front and rear attachments.
Delivery of 1 two-axle mower with a power of approx. 55 kW and a low centre of gravity for working on extreme slopes, hydrostat for front and rear attachments.
Delivery of 1 two-axle mower with a power of approx. 55 kW and a low centre of gravity for working on extreme slopes, hydrostat for front and rear attachments.
Mower tractor with power of approx. 85 kW and max. Total weight of at least 7,200 kg incl. front loader, lifting fork and bucket
Attachment stump grinder with diameter milling wheel approx. 470 mm, milling height/depth approx. 400 mm Weight approx. 430 kg as attachment to mower Reform Metrac H7RX
Weed brush as front attachment on Reform Metrak H7RX with working range of approx. 1,100 mm and brush plate approx. 800 mm
Boom mower with horizontal outreach of approx. 3,500 mm for tractor weight of at least 1,750 kg incl. lopper with working width of approx. 1,500 mm and mulching head with working br. of approx. 850 mm
Trailer baler, grease chamber press with power requirement of approx. 34 hp, bale diameter approx. 1,200 mm