The measure is a replacement for a 33-year-old TLF16/25 in Brensbach.
Chassis with all-wheel drive and additional off-road support with the body of an HLF 20 fire engine.
The vehicle must be designed as an emergency firefighting group vehicle HLF 20 in accordance with DIN 14530-27:2019-11, DIN EN 1846, DIN 14502-2 and DIN 14502-3 (in each case in the version current at the time of tendering). Designed for 16,000 kg and delivery of the fire brigade technical load to the vehicle.
A detailed description of the requirements can be found in the specification of services.
Lot 1 chassis for the construction of an HLF 20The vehicle must be designed as an emergency firefighting group vehicle HLF 20 in accordance with DIN 14530-27:2019-11, DIN EN 1846, DIN 14502-2 and DIN 14502-3 (in each case in the version current at the time of tendering).
The vehicle shall not exceed a maximum authorised mass of 16,000 kg.
Lot 2 Fire brigade technical construction for an HLF 20Body for an HLF 20 fire engine on an all-wheel drive chassis (wheelbase approx. 3,900 mm). The fire brigade loading, the extinguishing water tank and the fire extinguishing centrifugal pump must be accommodated in a three-part case (7 equipment rooms).
The vehicle must be designed as an emergency firefighting group vehicle HLF 20 in accordance with DIN 14530-27:2019-11, DIN EN 1846, DIN 14502-2 and DIN 14502-3 (in each case in the version current at the time of tendering).
The vehicle must not exceed a vehicle width of 2,500 mm.
Lot 3 firefighting loadingFire brigade loading of an HLF 20. Device according to DIN standards DIN 14800-17:2015-11 Equipment set Fall protection