The subject of the order is the delivery of: liquid fuel - Ekodiesel diesel oil or equivalent in the amount of 300 m 3 - the contractor delivered to the fuel station of the Ordering Party, delivered successively.

CPV: 09134100-8 Diesel

The Ordering Party reserves that in the event of a decrease in the need for the subject of the order, the Ordering Party is entitled to limit the scope of the ordered fuel supply, but this restriction can not cause that the Contractor will supply diesel oil in the amount less than 260 m 3 .

One-off fuel delivery min. 3,000 liters - max. 17,000 liters.

The subject of the contract should meet the following quality parameters:

- ignition temperature: minimum 55 about C

- sulfur content: maximum 10 mg / kg

- temperature of blocking the cold filter in maximum degrees Celsius:

The subject of the order is the delivery of: liquid fuel - Ekodiesel diesel oil or equivalent in the amount of 300 m 3 - the contractor delivered to the fuel station of the Ordering Party, delivered successively.

CPV: 09134100-8 Diesel

The Ordering Party reserves that in the event of a decrease in the need for the subject of the order, the Ordering Party is entitled to limit the scope of the ordered fuel supply, but this restriction can not cause that the Contractor will supply diesel oil in the amount less than 260 m 3 .

One-off fuel delivery min. 3,000 liters - max. 17,000 liters.

The subject of the contract should meet the following quality parameters:

- ignition temperature: minimum 55 about C

- sulfur content: maximum 10 mg / kg

- temperature of blocking the cold filter in maximum degrees Celsius:

In the transitional period (from March 1 to April 15 and from October 1 to November 15) - is minus 10 about C, and during the winter (from November 16 to the end of February)

- is minus 20 about C

- density in 15 about C: from 820 to 845 kg / m³

- viscosity at 40 about C: from 2 to 4.5 mm² / s

Other quality parameters should correspond to the Polish Standard PN - EN 590.

The sales unit will be 1 m 3 at a reference temperature of 15⁰ C.

For fuels collected with a cistern, the volume is calculated based on the volumetric flow meter and density at 15 ° C according to PN-ISO91-1.