1. The subject of the contract is the supply of cars for the needs of State Administration Units.

2. Appendix No. 1 to the SWZ contains a list of Units covered by this order and the number and type of vehicles that can be purchased by a given Unit

3. The Contracting Authority does not provide for the award of contracts referred to in Article 214 (1) (8) of the Law Pzp.

4. The Contracting Authority shall not allow the submission of variant tenders within the meaning of Article 92(1) of the PPL Act.

5. The Ordering Party shall allow the submission of partial tenders. The contracting authority allows the submission of tenders divided into 26 parts.

6. The Contracting Authority provides for the conclusion of a framework agreement referred to in Articles 311 – 315 of the PPL Act.

7. The Contracting Authority does not provide for the reimbursement of the costs

8. The Ordering Party shall not permit the submission of tenders in the form of electronic catalogs or attach electronic catalogs to the offer.

1. The object of the order is delivery of 2 pieces of cars - minibus 7-seater short 200 hp.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 13 000.00.

1. The subject of the order is the delivery of 5 pcs. cars - segment D five-door 170 hp electric.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount of: 23 000,00 zł.

1. The subject of the order is the delivery of 4 pcs. cars - segment D sedan-liftback 150 hp gasoline.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 12 000.00.

1. The subject of the contract is the delivery of 11 pcs. cars - segment D sedan-liftback 180 hp hybrid gasoline.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 43 000.00.

1. The subject of the contract is the delivery of 2 pcs. cars - segment D sedan-liftback 180 hp gasoline.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires the deposit in the amount of: PLN 7,000.00.

1. The subject of the order is the delivery of 9 pcs. cars - segment D sedan-liftback 250 hp gasoline 4WD.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires the payment of a deposit in the amount of: PLN 41,000.00.

1. The subject of the order is the delivery of 6 pcs. cars - segment D SUV 180 hp gasoline 4WD AT.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires the deposit in the amount of: PLN 25,000.00.

1. The subject of the contract is the delivery of 12 pcs. cars - van up to 3.5 tons 120 hp.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 6 000.00.

1. The subject of the order is the delivery of 1 pc. car - light 2-seater electric van.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 2 000,00.

1. The subject of the order is the delivery of 1 pc. car - station wagon van 5-seater electric.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 3 000,00.

1. The subject of the order is the delivery of 3 pcs. cars - segment Pickup DoubleCab 150 hp diesel.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 11 000.00.

1. The subject of the order is the delivery of 10 pcs. cars - B segment hatchback 90 hp electric.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 26 000.00.

1. The subject of the order is the delivery of 20 pcs. car - station wagon van 5-seater gasoline.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 43 000.00.

1. The subject of the order is the delivery of 3 pcs. cars - minibus 8-seater long 150 HP.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 12 000.00.

1. The subject of the order is the delivery of 5 pcs. car - station wagon van 5-seater electric.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 14 000,00.

1. The object of the order is delivery of 1 piece of cars - 9-seater electric minibus 130 hp.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 5 000,00.

1. The object of the order is delivery of 7 pcs cars - minibus 9-seater short 145 hp.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires the deposit in the amount of: PLN 21,000.00.

1. The object of the order is delivery of 3 pcs cars - minibus 9-seater short 200 hp.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 14 000,00.

1. The subject of the order is the delivery of 20 pcs. cars - segment D sedan-liftback 270 hp gasoline 4WD.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a deposit in the amount of: PLN 84,000.00.

1. The subject of the order is the delivery of 1 pc. cars - 2-seater van up to 3.5 tons 175 hp average.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 4 000.00.

1. The subject of the order is the delivery of 4 pcs. cars - C segment hatchback or sedan 120 hp gasoline.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires the deposit in the amount of: PLN 7,000.00.

1. The subject of the contract is the delivery of 2 pcs. cars - C segment hatchback or sedan 130 hp electric.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 5 000,00.

1. The subject of the order is the delivery of 8 pcs. cars - C segment station wagon 120 hp gasoline.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires the payment of a deposit in the amount of: PLN 18,000.00.

1. The subject of the order is the delivery of 1 pc. cars - C segment hybrid station wagon (HEV or PHEV).

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 3 000,00.

1. The subject of the contract is the delivery of 12 pcs. cars - C segment SUV 150 hp gasoline 4WD.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires the payment of a deposit in the amount of: PLN 37,000.00.

1. The subject of the contract is the delivery of 2 pcs. cars - C-segment hatchback 140 hp electric.

2. The proceedings shall be carried out in order to conclude a framework agreement.

3. The detailed method of execution of the subject of the contract is specified in the Order No 2 to the SWZ - Technical Specification and in Form No 3 to SWZ - Designed provisions of the Framework Agreement.

4. The Ordering Party determined the estimated number of cars ordered only for the purpose of the valuation of the tenders submitted by the Contractors, which will then be used to develop a ranking of the submitted tenders.

5. For each part, a framework agreement with up to 5 Contractors will be concluded.

6. Conducting enforcement proceedings will take place via the Purchasing Platform at the following address: https://zamowienia.eb2b.com.pl or https://platforma.eb2b.com.pl, which will require the Contractor to use a qualified electronic signature.

7. The choice of the Contractor for the conclusion of the implementing agreement will follow the re-verification of unit prices of the offered subject of the contract. The other parameters proposed by the Contractor in the offer for the conclusion of the Framework Agreement remain unchanged throughout the duration of the framework agreement.

8. The Ordering Party requires a defect in the amount: PLN 6 000.00.