New device parametric test system with the following characteristics:
— 230 VAC, 50 Hz PE /N power distribution unit (PDU) according to German voltage standard, connection for TN-S network (not combined PEN),
— Ensure full compatibility with Keithley Test Environment (KTE) software
— 4 SMU (current range at least 100 mA to 1 A; voltage range at least 200 mV to 100 V),
— Switch Matrix in 24 pin full force sense Kelvin configuration,
— 2 digital multimeters (min. 7.5 digit resolution; measuring ranges at least 100 mV to 100 V),
— 1 multifrequency capacitance meter (frequency range min. 10 kHz to 1 MHz),
— 1 dual channel pulse generator unit (pulse width range at least 100 ns to 100 ms, rise /fall time range at least 50 ns to 100 ms, pulse level at least 20 Vpp),
— Ring oscillator option with spectrum analyzer (frequency range at least 9 kHz to 3 GHz); driver software and cult measurement routines for the KTE system software,
— 1 sample card adaptor with guarded triax cabling according to pinmapping to be specified,
— 1 year warranty,
— Full on-site system installation by qualified service engineer,
— System must be matched to the existing S 530 during installation -> Bidder proposal must be presented
— The system must be able to communicate with an Accretec UF 200 prober; accurate data can be obtained upon request
— Complete mechanical adaptation to the existing UF 200 system,
— the system must be CE certified
— the plant must be delivered to IHP depot in accordance with Incoterm 2010 DDP, CIP or DAP,
— For deliveries outside the EU, the supplier is also the importer
— Incl. training.
New device parametric test system with the following characteristics:
— 230 VAC, 50 Hz PE /N power distribution unit (PDU) according to German voltage standard, connection for TN-S network (not combined PEN),
— Ensure full compatibility with Keithley Test Environment (KTE) software
— 4 SMU (current range at least 100 mA to 1 A; voltage range at least 200 mV to 100 V),
— Switch Matrix in 24 pin full force sense Kelvin configuration,
— 2 digital multimeters (min. 7.5 digit resolution; measuring ranges at least 100 mV to 100 V),
— 1 multifrequency capacitance meter (frequency range min. 10 kHz to 1 MHz),
— 1 dual channel pulse generator unit (pulse width range at least 100 ns to 100 ms, rise /fall time range at least 50 ns to 100 ms, pulse level at least 20 Vpp),
— Ring oscillator option with spectrum analyzer (frequency range at least 9 kHz to 3 GHz); driver software and cult measurement routines for the KTE system software,
— 1 sample card adaptor with guarded triax cabling according to pinmapping to be specified,
— 1 year warranty,
— Full on-site system installation by qualified service engineer,
— System must be matched to the existing S 530 during installation -> Bidder proposal must be presented
— The system must be able to communicate with an Accretec UF 200 prober; accurate data can be obtained upon request
— Complete mechanical adaptation to the existing UF 200 system,
— the system must be CE certified
— the plant must be delivered to IHP depot in accordance with Incoterm 2010 DDP, CIP or DAP,
— For deliveries outside the EU, the supplier is also the importer
— Incl. training.