The subject of the contract is the delivery in the form of an operating lease with an option to buy a brand new wheel loader with accessories.
The subject of the contract is the delivery in the form of an operating lease with an option to buy a brand new wheel loader with accessories.
I. Machine Specifications:
1. Loader with accessories brand new,
2. Serial production charger, no prototype or first series is allowed. Manufactured no earlier than 2023.
3. total height of the machine (including accessories) maximum 3500 mm,
4. min. ground clearance 385 mm,
5. total working weight 18,000 kg - 20,000 kg,
6. total width from 2800 to 3100 mm,
7. load at full turn and straight not less than 14,000 kg,
8. breakout force min. 14.500 kg,
9. Horizontal loading height with a high dump bucket enabling loading of a truck with a semi-trailer with a height of min. 4.0 m,
10. maximum lifting capacity allowing for optimal operation of not less than 6,200 kg,
11. Discharge height for bucket opening angle 45 degrees - not less than 3,000 mm.
II. Drive/Motor:
- liquid-cooled diesel engine with a power of min. 170 kW (according to ISO 9249 or SAEJ 1349),
- An engine that meets at least STAGE V emission standards
- primary fuel filter with water separator,
- fuel tank with a capacity of min. 260 litres, with fuel filler secured with key lock.
III. Chassis:
- steering system – articulated frame with two steering cylinders,
- four-wheel drive,
- reinforced open-type axles with a 100% locking system on the front differential,
- total oscillation angle of the rear axle min. 24º,
- maximum torque min. 1100 Nm,
- 23.5 R25 L5 tyres, with mudguards above each wheel.
IV. Hydraulic System:
- powered by a variable displacement multi-piston pump, hydraulic system pressure min. 220 MPa, pump capacity min. 240 l/min, or equipped with two multi-piston pumps with a capacity of min. 2x 120 l/min,
- Control of the attachment by means of a multifunction joystick equipped with a direction switch and a switch for an additional hydraulic line.
V. Gearbox:
- automatic gearbox providing the ability to change gear under load,
- torque converter with or without torque converter lockout,
- minimum 4 forward gears, 3 reverse gears,
- gearbox oil level gauge,
VI. Cooling system:
- radiator fan with hydraulic drive and automatic reversing function,
- design of the cooling system for quick cleaning with compressed air of each radiator individually,
VII. Braking system:
- four-wheel wet disc service brakes,
- independent brake circuit for the front axle and rear axle,
VIII. Electrical System:
- voltage 24V,
- mechanical power switch,
- Lighting in accordance with current regulations to enable movement around
public roads,
- 4x front and 2x rear working lights,
- LED flash on the roof of the cabin, orange color with the possibility of
Dismantling
- sound signal and reversing signal,
- dual batteries,
IX. Cab:
- FOPS / ROPS certified cab,
- cabin equipped with air conditioning, ventilation, heating,
- windshield wipers and washers,
- multifunctional display of the system monitoring operating parameters, dashboard and other descriptions in Polish,
- steering column adjustment,
- reversing camera with color display, adjustable cover, in HD resolution, IP 67 protection,
- sun blind,
- lockers for instructions and tools,
- handle (knob) on the handlebar,
- entrance door to the cabin on the left or on the left and right,
- Heated double exterior side mirrors
- two interior mirrors,
-Radio
X. Work Tools:
- high dump bucket, bucket capacity min. 4m³, equipped with a reinforced blade made of high-quality "hardox" steel – replaceable (mounting with screws),
- towing hitch at the rear of the machine,
- automatic central lubrication system.