Several existing buildings are currently located on the site of the so-called Kirchenwirt in the municipality of Wörthsee. The building of the former Kirchenwirt is to be preserved and renovated as a local building. The remaining existing buildings will be demolished and replaced by 2 new buildings with several residential units. In addition, an event hall and small commercial units are being built on the site.

In the course of the construction project, room, roofing and facade work is to be carried out in the new building.

— mounting BSH walls approx. 1 320 m2,

— mounting BSH ceilings approx. 570 m2,

— bonding, delivery, assembly BSH NKL 1: approx. 8 m3,

— bonding, delivery, assembly NH NKL 1: approx. 26 m3,

— roof sheaves approx. 600 m2,

— roof insulation approx. 600 m2,

— roof insulation approx. 600 m2,

— slats counter battens approx. 600 m2,

— roofing tile approx. 600 m2,

— Installation of roof windows 20 pieces,

— installation load-bearing facade approx. 600 m2,

— insulation panels facade approx. 630 m2,

— ventilated facade substructure approx. 630 m2,

— blow-in insulation cellulose facade approx. 630 m2,

— MW insulation facade approx. 100 m2,

— interchangeable formwork facade approx. 630 m2,

— agraffenkonstr. curtain wall and fibre-cement panels approx. 100 m2,

— surface coating yellowing and surface protection inside approx. 1 400 m2,

— surface coating metallic wood glaze outside approx. 700 m2,

— static lanyards (VG, TG, anchor bolts, angles, etc.) approximately 5,000 pieces,

— Delivery of assembly of steel components approx. 2.0 t.