The object of this purchase is dental materials and tools (hereinafter referred to as "goods"). The list of goods, the maximum quantities and the requirements for them are set out in Annex 3 "Technical specification" to the tender specifications.

The supplier may submit a tender for one, several or all of the lots, but must offer all the goods and the quantity specified in the separate tranche.

Method of calculating the purchase contract price — fixed price with revision. The quantities of goods to be purchased shall be determined by specifying the maximum quantity of goods. The quantities of goods purchased at the time of execution of the contract, as well as the contract price which the contracting authority will have to pay to the supplier, depend on actual orders, i.e. the quantities purchased may not exceed the maximum quantity of the goods, and the smaller quantity may be redeemed by the contracting authority.

Designed to increase the rarity of the alginate substance in a spoon, Dentsply* or equivalent

Calcium hydroxside 50g

Calcipast + I*, 2,1 g or equivalent

Caries Marker*, Voco, 3 ml arba lygiavertis

Ceramics Etch* or equivalent, 6 ml, 5 % Red. Packaging – 6 ml

Citric acid 20% 30 ml

Clip* or equivalent

Coe-pack* (91 ml+33 ml) or equivalent

EDTA* 17% or equivalent

Endo frost*, cold aerosol, 200 ml or equivalent

Eugenol* or equivalent

The liquid is designed to increase the rarity of silicone material in a spoon, 3M ESPE * or equivalent

Expasyl* or equivalent

Filtek Flow*, whistling 2 g or equivalent

Final Varnish LC*, Riva Coat*, 5 ml  arba lygiavertis

Fisurit FX*, 5 g or equivalent

Fuji plus* set or equivalent

Futar Oclusion* or equivalent

Futurabond DC* or equivalent

Radiopaque rate 252%, G-aenial Universal injectable* - in capsules 0.27 g

or equivalent

Plaster for fixing models in an articulator

Class III gypsum for the manufacture of models, white

Applicative anesthetic in the form of jelly for superficial anesthesia 29.6 g

Hydrolysis, 45 ml

Radiopaque, secreting fluorine in the amount of 2.5 g. Ionoseal*, 4 g or equivalent

Ketac cem* set, 33 g +12 ml

Ketac cem* liquid, 12 ml or more

Ketac cem* powder, 33 g or equivalent

Ketac Cem Easy Mix*Pack of 30 g powder and 12 ml liquid or equivalent

Metapex*, 1 Syringe; 2,2 g or equivalent product

Occlus Plus-Spray*, sprayed lime or equivalent

Opalescence Endo* or equivalent product

Optibond* compl.;

OptiBond FL 1 Prime*, 120 ml

OptiBond FL 2 Adhesive*, 80 ml

or equivalent

Aroma fast set* or equivalent

Optosil *, 900 g , Speedex;

Optosil*, 60 ml, Speedex

or equivalent

Panasil contact plus* or equivalent

Paternal Resin* rinkinys;

Patern Resin* milteliai

Patern Resin*skystis

or equivalent

"Permacem 2.0*, 9 g. The latest generation of double-hardening, self-binding, continuous cementing of the material for cementing the liners, blankets, crowns, bridges, root canal pins, cementing crowns and bridges on the implant abutment. Strong binding 21.6 Mpa with zirconium and ceramic restorations. Exceptional fluidity during pressing. The formula of the binder monomer with MDP. MDP monomer provides a strong chemical

binding to enamel, dentin, metal alloy, zirconium, silicate and oxide ceramics. MDP is a functional monomer (10-metacryloyloxylcil-dihydrogen phosphate), which acts as a bond between binders and tooth structure, metal alloys and zirconium. extremely high resistance to pressure: 249MPa. Colors: A2 Universal

A3 Opaque,Transparent."

or an equivalent good.

Sealing polishing paste, DC*, Misarium*, Dentsplay* or equivalent

Polishing paste Prophy* or equivalent

(5 percent, 22600 ppm of fluoride) in disposable 10 ml dispensers, of various flavors. VOCO Profluorid Varnish* or equivalent

ProRoot MTA* (or equivalent) channel filler white powder

Relyx Unicem U200, 3M*, 8,5 g or equivalent

Struktur premium * (or equivalent) with the choice of color A1,A2, A3

Bifluorid* varnish 4 g vial with 10 ml solvent or equivalent

Twinky star* supplement 0.25 g, capsules, individual colors

or equivalent

Twinky Star Flow*, 2 g syringe or equivalent

Ufigel Hard* set or equivalent

Wax basal, red

Vitrebond* set or equivalent

Elmex* gel or equivalent

Opalescence* or equivalent

Luxa Bite, DMG*, 50 ml, cartridges or equivalent

Rebilda*, 10 g or equivalent product

EverX POST* , syringes, flow or equivalent

BioRoot™ RCS*, Septodont*, pak. 1 x 15 g x 35 x 0,20 ml or equivalent

Optosil* or equivalent

Ceramic bond* or equivalent

Straumann BoneLevel*

Straumann Synocta*

Dentsply-Friadent Ankylos*

Straumann*

Xive*

or equivalent

29 mikronai, Sandman Futura*

45 mikronai, Sandman Futura*

29 microns, in bottle with jar, Sandman Futura*

45 microns, in bottle with jar, Sandman Futura*

or an equivalent good

Vinyl polysiloxane print mass (base) for prints of crowns, bridges, pads and blankets, high-end stability, excellent recovery after deformation, high tear resistance, hydrophilic material, Snap-set technology – convenient preparation and mixing time (you can calmly prepare for work without haste), rapid hardening in the mouth, A Shore hardness index ≥61, dimensive change after 24 hours ≤ 0.5%, type: soft. Maximum working time extratorally: ≤ 3:15 min., hardening time in the mouth: ≥ 3:15 min. Ingredients: vinyl polysiloxane, silica, pigments, additives, platinum catalyst. Honigum Pro Putty soft*

Vinyl polysiloxane print mass (base) for prints of crowns, bridges, pads and blankets, high-end stability, excellent recovery after deformation, high tear resistance, hydrophilic material, Snap-set technology – convenient preparation and mixing time (you can calmly prepare for work without haste), rapid hardening in the mouth, A Shore hardness index ≥61, dimensive change after 24 hours ≤ 0.5%, type: soft fast. Maximum working time extratorally: ≤ 1:45 min., hardening time in the mouth: ≥ 1:45 min. Ingredients: vinyl polysiloxane, silica, pigments, additives, platinum catalyst. Honigum Pro Putty soft fast*

Vinyl polysiloxane print mass (corrective) for prints of crowns, bridges, pads and blankets. A material that combines excellent fluidity and stability properties. Hydrophilic, contrasting material, high final hardness ( ≥1.41 J). Without being exposed to high pressure (≤ 10 Pa), the viscosity of the material ≥2500 Pa·s, stable, remains in the embossed place. Under pressure (≥1000 Pa), the viscosity of the material ≤ 10 Pa, optimal fluidity and restoration of the smallest details. Shore A hardness index ≤ 49, dimensical change after 24 hours ≤ 0.35%, type: light fast. Working time intraorally ≤ 0:30 min., the maximum working time is extratorally ≤ 1:30 min ≥. Ingredients: vinyl polysiloxane, silica, pigments, additives, platinum catalyst. Honigum Pro Fast*

or an equivalent good

Mixing nozzles for a bis-acrylic-based bite recording material, yellow with an orange mixing spiral, mixing ratio 10:1. LuxaBite* or equivalent

The material for recording the bite of the base of the VPS, orange in color, can be used in combination with the facial arc. The shore-A hardness index ≥ 93, high resistance to breakage, minimal resistance to bite, fast-hardening, high dimensive stability, fresh orange smell, easily cut with a scalpel or adjusted with a silicone polishing instrument. Ingredients: vinyl polysiloxane, hydrogen polysiloxane, fillers, pigments, additives, platinum catalyst. O-Bite* or equivalent

Binder / glue for the print mass of the VPS base in combination with metal and plastic spoons. Provides good adhesion, easy to apply and use, short curing time after application, blue color – easily noticeable. Ingredients: silicone resin, solvent. Tray Adhesive* or equivalent

Light-cured varnish for the repair and sealing of temporary crowns and bridges, can also be used with a material for rebaseing removable plate prostheses as a binder, glossy without polishing, excellent adhesion to repair materials, resistant to scratches, low surface roughness. Applied in a thin layer on the surface of the temporary restoration. Composition: multifunctional acrylates, methyl methacrylates, catalysts, stabilizers, additives. Glaze Bond LuxaTemp* or equivalent

Self-hardening composite for the production of temporary crowns, bridges, pads, blankets, laminates. Extremely high resistance to decay (≥ 1.55 MPa √m), scratching. Barcol's hardness index ≥ 54. Resistance to pressure ≥ 375 MPa, bending resistance≥ 124 MPa, tensile strength ≥ 50 MPa. Color stability, good adaptation and application. Biocompatible material. Suitable for longer-wearing temporary restorations. Composition: glass filler material in a matrix of multifunctional metacrylates, catalysts, stabilizers and additives. There are no methyl methacrylates. Filler: ≥ 41% by weight / ≥ 23% of the volume. Luxatemp Star AM* or equivalent

Biodental* or equivalent. Biologically active substance - tricalcium silicate cement. In the kit 15 x 0.7 g capsules with powder and 15 single doses with a solution.

Perbase material for repairing mucosal-colored removable dentures, adding fasteners, fixing removable dentures on implants. Biosu harmonized (does not contain methyl-methacrylates and peroxide). Filler content: ≥ 45% by weight / ≥ 25% by volume. Composition: mucous-colored self-hardening perbaseing material on the basis of a composite in a medium of multifunctional metacrylates, catalyst, stabilizer. Luxapick up* or equivalent

Low viscosity resinous light is cured with adhesive siler (sealant). Indications: can be used as a binding resin, as an air conditioner for surfaces of composite restorations, as a conditioner for brush surfaces, as a siler of natural teeth and edges of old compositional restorations, siler of temporary acrylic crowns and bridges. Ingredients: methacrylic acid ester-based liquid with an activator. Ena Seal* or equivalent

Enamel Silic Temp* or equivalent

Physical properties:vicker hardness: 700 Mpa, Modulus of elasticity: 14500 Mpa, Bending strength: 170 Mpa, Compression strength: 450 MPa.Colors BF1, BF2, UD6, UD5, UD4, UD3, UD2, UD1. Enamel Plus HRI* or equivalent

RC-prep Endo-prep*, 5 ml or equivalent

Half-shaped, cantoned, closed, with adjustable knob

Tepe, Curaprox*, Solo (sizes 0.4; 0.45 ;0.5; 0.6; 0.7; 0.8 mm)

or equivalent

"The heater is designed to heat the composite in syringes and capsules. Two temperature modes:

a) +39°C – pašildymas kompozito, nuskausminimų, natriohipochlorito

b) +55°C – composite insulation up to +55°C is suitable for cementing liners, overlays, laminates made of composite and ceramics instead of cement.

The light indicators shall show when the required temperature has been reached:

a) T1 - +39°C

b) T2 - +55°C

Room 6 is 4 tombs."

Aesthetically pleasing, transparent, invisible under restorations, but easy to recognize when removing excess. Easily removed in one sample. Does not stick to instruments. Resistance to pressure 77 MPa. Working hours 1.00 min. Hardening time in the mouth 6-7 minutes. The thickness of the cement layer is 39 mkm. TempoCem ID smartmix DMG* Pack 5ml + mixing tips.

There are no methyl-methacrylates, excellent adhesion to the prosthesis, tear-resistant, odorless, tasteless. Long-lasting color stability. Silagum comfort* starting dial: dispenser Type 25, Silagum comfort 25ml, varnish 2x10ml, primer 5ml, mixing nozzles "yellow".

Calcimol* or equivalent

Mirror for intraoral photography OCCLUSAL* with silicone autoclavable handbag, front sight, unspecified image (reflection over 95%), for autoclaves, realistic and bright color reflection, very scratch-resistant, corrosion resistant, heat resistant up to 200 °C, CE mark, dimensions: the most elongated width - 65 mm, length with silicone handbag - 154 mm

Mirror for intraoral photography OCCLUSAL* enlarged, does not darken the image (reflection over 95%), autoclaved, realistic and bright color reflection, highly scratch resistant, corrosion resistant, heat resistant up to 200 °C, CE mark, dimensions: the most elongated width - 75 mm, minimum width - 66 mm, length - 140 mm

Mirror for intraoral photography BUCCAL* with silicone autoclavable handle, does not darken the image (reflection over 95%), autoclavable, realistic and bright color reflection, highly scratch-resistant, corrosion resistant, heat resistant up to 200 °C, CE mark, dimensions: width - 40 mm, length with silicone handle - 160 mm

Enaseal*, 5 ml. Does not contain BIS-GMA and BISPHENOL-A.

Elugel*, 40 ml or equivalent

EMS Airflow Perio*, 120 g 1 pack or equivalent

Master dent topical anesthetic gel Benzocaine* 20 proc. cherry (29,6 ml) arba lygiavertis

Straumann® Emdogain* 0.15 ml

or equivalent

MJK instruments spoon blades SB003, packaging 10 pcs.

3 mm

'Calcimol LC* or equivalent. Suitable for direct and indirect pulp coating. Radiopaque, perfectly protects against acids by etching the surfaces of the teeth, promotes the formation of secondary dentin.

Pack of 2 syringes of 2.5 g'