Lot 1) 2 pieces 3-axle chassis with one front axle and 2 rear axles (with positively steered trailing axle, unloadable), suitable for 23 m 3 Press Müllaufbau;
Lot 2) 1 piece of waste construction, suitable for residual waste, paper, bulky waste and organic waste disposal for container sizes from 80 - 1 100 liters (chassis - wheelbase about 3 900 mm / 3-axle);
Lot 3) 1 piece chassis suitable for Müllpressaufbau 5 m 3 with side lifting device for MGB up to 240 liters.
Chassis for garbage truck
Lot 1) 2 pieces 3-axle chassis with one front axle and 2 rear axles (with positively driven trailing axle, unloadable), suitable for approx. 23 m 3 -Pressmüllaufbau, cab with low entry, driver's seat air-sprung, orthopedic version (heated), passenger seats as a bench or individual seats, the chassis must also be separately separately raised and lowered at the front and rear, engine power: about 260 kW EURO 6 , Automatic transmission (ZF / Allison), wheelbase: approx. 3 900 mm + 1 350 mm, air conditioning with dust and pollen filter (CFC-free), heat insulation glazing, etc.
Construction for garbage truck
Lot 2) 1 piece of waste construction suitable for residual waste, paper, bulky waste and organic waste disposal for container sizes from 80 - 1 100 liters (chassis wheelbase approx. 3 900 mm / 3 axles), container volume: approx. 23 m 3 , Pressing force approx. 26 t with low hydraulic pressure, possibility of attaching an automatic lifter (80 to 1 100 liters) split comb.
Chassis for refuse compact construction 5 m3
Lot 3) 1 piece chassis suitable Müllpressaufbau 5 m 3 with seitli. Hupkippvorrichtung for MGB up to 240 liters, strongest possible front and rear axle, single cabin, perm. HA min. 3.6 t, perm. VA min. 2.1 t, strainer on VA, crossbeam screwed, longest carrier reinforcement, 2-axle with one driven axle (rear wheel drive), gross vehicle weight 5.5 t, diesel engine OM651 with Euro VI in accordance with the valid from 15.6.2019 valid approval regulations, engine power about 100 kw, etc.