HMN Natural Gas I / S (Buyer) wants to offer an agreement for the ongoing procurement of turbine meters PN16 in sizes G160, G250, G400, G650, G1000, G1600 and G2500 as well as additional services in the form of HF pulse output and serial readings, different dynamic range and calibration pressure , as well as ANSI-class 150 and PN10 flange assembly.

HMN Natural Gas I / S (Buyer) wants to offer an agreement for the ongoing procurement of turbine meters PN16 in sizes G160, G250, G400, G650, G1000, G1600 and G2500 as well as additional services in the form of HF pulse output and serial readings, different dynamic range and calibration pressure , as well as ANSI-class 150 and PN10 flange assembly.

The turbine meters are used to measure natural gas consumption for customers, primarily heat plants and companies, etc., and can be installed indoors as well as outdoors.

Turbine gauges in sizes G160 to G1000 are primarily used with flange connections in sizes from DN 80 to DN 200. To a very limited extent also turbine gauges in G1600 and G2500 with flange connections in DN 200 and DN 250 are used. Most of the meters come with an operating pressure of min. .16 bar (G). In addition, quite a few meters are used with PN10 and ANSI-class 150 flanges and with an operating pressure of 10 and 20 bar (G). All meters come with dual LF encoder. Therefore, the majority of meters with HF encoder are used.

G1600 and G2500 gauges and ATM calibration pressure gauges, extended dynamic range and PN10 flange assembly are used to a very limited extent, so it must be emphasized that there is considerable uncertainty in the stated procurement basis.

The ratio of the number of meters taken with / without serial reading is based on estimates and depends, among other things, on the development of the business needs and the Supplier's pricing. If the Supplier's pricing of material certificate is favorable, it is expected that all meters will be purchased, including material certificate.