1. The subject of the contract is the implementation of the sentence entitled: "Successive delivery of IT equipment and software for the needs of SP ZOZ CSK UM in Łódź".

2. Due to the extensive description - a detailed description of the subject of the contract, details of successive deliveries are included in Annex No. 2 to the SWZ. The subject of the contract includes successive delivery of ICT equipment divided into 15 parts of the contract

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

2.1. Part No. 1: Type I computers — 270 pcs. (CPV: 30213300-8 – Desktop computer), Computers type II – 30 pcs., Monitors type I – 300 pcs. (CPV: 30231310-3 – Flat Panel Displays), Laptops Type I – 10 pcs. (CPV: 30213100-6 – Laptops), Laptops type II – 5 pcs.

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.10. Part 10: Renewal of Axence nVision software license (CPV: 48210000-3 – Network software packages),

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.11. Part 11: DICOM PACS viewer for medical images – 40 pcs. (CPV: 48328000-3 – Computer Processing Software Packages),

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.1. Part No 12: Type I label printer — 2 pcs. (CPV: 42962000-7 – Printing and graphics devices), Label printer type II – 5 pcs.

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.13. Part No. 13: Microphone — 1 pc (CPV: 32341000-5 – microphones), Access Point – 1 pc. (CPV: 32424000-1 – Network infrastructure), External disc burners – 10 pcs. (CPV: 30233151-4 – Device for reading and/or burning compact discs (CDs)),

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.14. Part No. 14: Type I hard disk — 1 pcs. (CPV: 37453300-1 – Disks), Hard Drive Type II – 12 pcs, Hard Drive Type III – 4

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.15. Lot No 15: Laminator A3 — 2 pieces (CPV: Laminators- 42994230-1).

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.2. Part No 2: Type III computers — 3 pcs. (CPV: 30213300-8 – Desktop computer).

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.3. Part No. 3: Monitors type II — 6 pcs. (CPV: 30231310-3 – Flat Panel Displays),

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.4. Lot No 4: Terminals — 20 pcs. (CPV: 30231100-8 – Computer terminals),

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.5. Part No 5: Televisions – 5 pcs. (32324600-6 – Digital televisions),

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.6. Part No 6: Shredders — 50 pcs. (CPV: 30191400-8 – Shredders

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.1. Part No. 7: UPS – 50 pcs. (CPV: 35100000-5 – Emergency and safety devices)

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.8. Part No 8: Duplicator of plates – 1 pc. (CPV: 30233151-4 – Device for reading and/or burning compact discs (CDs)),

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.

2.9. Part No. 9: Cordless VoIP phones – 50 pcs. (CPV: 32552110-1 – cordless phones), Cordless phones – 50 pcs. (CPV: 32552110-1 – cordless phones)

Due to the extensive description - a detailed description of the subject of the contract is included in Annex No. 2 to the SWZ. The subject of the contract includes the supply of ICT equipment divided into 15 parts of the contract.

3. The scope of the contract includes the delivery of new, non-exhibition hardware and software to the Ordering Party's headquarters. The supplied computer equipment must have manuals in Polish (and how much they are required), it must be covered by at least the warranty period - specified for a given device, equipment specified in Annex No. 2.

4. The Contractor is obliged to attach to the OFFER - Appendix No. 2 "Technical parameters" supplemented - for all offered devices, with a description of the offered products confirming compliance with all parameters and requirements specified by the Ordering Party - descriptions of parameters, functional, photographs, etc., including in particular - information about the name of the manufacturer, model name / manufacturer's catalog number for the offered devices. If the manufacturer does not assign the above names / part number to the devices produced, then the Contractor shall attach a statement that the manufacturer does not assign these names to the devices. The attached descriptions and documents must enable the Contracting Authority to verify the solutions offered by the Contractor in terms of the required technical and functional parameters.

5. Failure to submit Appendix No. 2 constitutes the inability to evaluate the offer and thus the basis for rejecting the offer from the proceedings.

7. NOTE: Whenever the documentation indicates the make or origin of a product or device, it should be assumed that each name is followed by the word "or equivalent", i.e. that embedded materials, devices, etc. will have (characterized) all parameters no worse than those described in this documentation, for a given item.

8. If specific technical solutions are indicated in the description of the subject of the contract, it is allowed to use equivalent solutions as to their features and parameters – specified for a given item of the subject of the contract, and all possible brand names of devices and products used in the description of the subject of the contract should be treated as standard definitions, and not specific brand names of devices and products used in this documentation. The obligation to prove equivalence lies with the Contractor.