The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023. The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ).

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Górki forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Kalembice forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Równica Forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in article 6 section 1 point 1 of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Forestry Dobka - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Czantoria forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Czantoria forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023.

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Cisowa forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Hołownia forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Bukowa forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Forestry Forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Pierściec Forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Dębowiec forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Pruchna forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.

The subject of the contract are services in the field of forest management in accordance with the definition in Article 6(1)(1) of the Act of 28 September 1991 on forests (consolidated text: Journal of Laws of 2022, item 672 – "Act on Forests") including works in the field of forest breeding and protection, fire protection, harvesting and harvesting of wood to be performed in the Ustroń Forest District in 2023 (Zebrzydowice Forestry - Package Implementation Area)

The material scope of the subject of the contract includes the total quantities of works resulting from Annex 2 to the SWZ (detailed annexes can be found in point 3.1 of the SWZ). The material scopes listed in the annexes included in Annex 2 are estimates.

Quality standards relating to all essential features of the subject of the contract are specified in Appendix No. 3 to the SWZ. A detailed description of the standard of technology for performing individual forest works (activities) specified in Annex 3.1 to the SWZ and in Annex 3.2 to the SWZ constitutes the basis for determining the quality requirements relating to the elements constituting the subject of the contract (Annex No. 2 to the SWZ). If the activity described in the above-mentioned annexes is not provided for in the description of the subject of the contract (Annex No. 2 to the SWZ), then in this respect the provisions of Annex No. 3.1. to the SWZ and in Annex 3.2. to the SWZ do not apply. Descriptions of activity codes and a description of the rules of the procedure for collecting forest works are included in Annex 3 to the SWZ. The implementation of works included in the subject of the contract for individual Packages will take place in the area of forests – appropriate for a given Package ("Package Implementation Area"). The location (forest address) of individual forest works falling within the scope of the Subject of the Agreement indicated in the annexes included in Annex 2 is preliminary. The location (forest address) of individual works falling within the scope of the Subject of the Agreement will be specified in the Order referred to in point 3.3. point 1), with the proviso that it will always be the Package Implementation Area. Due to the actual natural and weather situation that may occur during the implementation of the subject of the contract, as well as the currently unforeseen economic and economic situation, the Ordering Party reserves the right to make reducing corrections, increasing adjustments, determining new locations, as well as suspending the activities indicated in individual rows of tables describing the subject of the contract. Increasing adjustments do not imply the introduction of new works not covered by the scope of the contract, and reducing corrections do not mean the complete abandonment of part of the work. It should be understood as an increase in the number of works in one location (forest address) in the Package Implementation Area (including locations in the Package Implementation Area not initially indicated in the SWZ), while reducing the number of works in another location (forest address) in the Package Implementation Area, within the total number of individual works falling within the scope of the Subject of the Agreement specified in the SWZ, to be implemented throughout the Package Implementation Area. The need to increase the size of certain elements of the contract in the course of performing the subject of the contract may also occur in order to perform the full scope of work described in the subject of the contract. The determination of the new location takes place as part of the subject of the contract, but always only in the Package Implementation Area. In the case of obligatory exclusion of items from harvesting in the machine system (harvesting wood on cutting positions where it is unacceptable to use multi-operational machines) in particularly justified cases, e.g. changes in the conditions for which the above activities have been established, the Ordering Party allows a change in the technology of wood harvesting. Additional detailed information, regulations and rules for the performance of the contract are contained in points 3.1, 3.2 and 3.3 of the SWZ.