The subject of the order is the delivery of machines to operate the waste sorting hall. The order will be executed in the following parts:

Part 1: Telescopic boom lift with interchangeable working gear — 2 pieces

Part 2: Forklift with counterweight — 2 pieces

The subject of the order is the delivery of machines to operate the waste sorting hall. The order will be executed in the following parts:

Part 1: Telescopic boom lift with interchangeable working gear — 2 pieces

Detailed specification of the item of the order - expected parameters and functionality:

- a machine equipped with a diesel engine,

- engine power not less than 95 kW,

- machine with torsion axles - front and rear, with the possibility of turning front wheels, front and rear wheels, driving “crab”,

- machine equipped with pumped wheels with a diameter of 24rims,

- machine with the ability to overcome climbs with a load — down to 15%, up to 35%,

- a machine equipped with a glazed, closed cabin,

- cabin equipped with outdoor air supply with the possibility of hot air supply,

- air-conditioned cabin,

- cabin equipped with adjustable (also up-down adjustable), seat with seat belt,

- the total weight of the machine without fittings not more than 8000 kg,

- the length of the machine without attachment (not including the hitch) not more than 4,8 m,

- the height of the machine (from the ground to the top of the cabin) not more than 2.6 m,

- the capacity of the machine not less than 3450 kg,

- forward overhang with a load of 1 200 kg (from the center of gravity of the material transferred to perpendicular to the ground tangent to the surface of the front wheels) not less than 3,2 m,

- upward overhang at an angle of 70 degrees to a level with a load of 2 450 kg (from the ground to the center of gravity of the material transferred at the height of the fork) not less than 7 m,

- a machine equipped with front and rear lights and blinkers,

- a machine equipped with an orange signal light,

- machine equipped with a sound signal when driving the rear,

- a machine equipped with a pin pin on the back,

- working equipment — spoon with min/max capacity 1,9-2,1 m3 — total 1 piece for both machines, pallet forks adjustable by hand length 160 cm with a capacity not less than the capacity of the machine — a total of 1 piece for both machines. pallet forks adjustable by hand length 160 cm with a capacity of not less than less. as the capacity of the machine — a total of 1 piece for both machines, a spoon with min/max capacity 2,5-2,6 m3 — a total of 1 piece for both machines.

- complete factory new assembled machines, not prototypes, delivered to the premises of the Contracting Authority,

- descriptions and menus of machines in Polish. English-language communications are allowed,

- machines marked with CE mark,

- machines filled with consumable fluids, supplemented with fuel to full,

- training in Polish of the Contracting Authority personnel in the field of operation and ongoing maintenance of machinery,

- transfer of machine documentation, including CE declaration of conformity, manual and maintenance of machines, warranty books. Documents - instructions for operation and maintenance of machines, warranty books drawn up in Polish. List of errors in European language are allowed,

- drawing up the necessary documentation, submitting on behalf of the Contracting Authority requests for testing prior to the first decision authorising operation, participation on behalf of the Contracting Authority in UDT studies, submitting to the Contracting Authority the books of revision of technical equipment for machines required by technical supervision regulations together with UDT positive decisions.

Minimum warranty period for the subject of the order:

12 months and 1 000 hours of operation depending on what comes first for a telescopic boom lift with replaceable working equipment,

MORE INFORMATION IN THE DOCUMENT PN. “OFFER INQUIRY” 18/NFOSIGW/2021 AVAILABLE AT THE CONTRACTING AGENT: http://www.eko-mysl.pl/zapytania-ofertowe/

The subject of the order is the delivery of machines to operate the waste sorting hall. The order will be executed in the following parts:

Part 2: Forklift with counterweight 2 pieces:

Detailed specification of the item of the order - expected parameters and functionality:

- a machine equipped with a diesel engine,

- the power of the driving engine not less than 35 kW,

- the sitting position of the operator,

- number of front/rear gear — 1/1,

- mast — front, lifting height 3m, integrated side slide,

- minimum turning radius (external) not more than 245 cm, minimum turning radius (internal) not more than 22 cm,

- incline angles of the mast minimum forward/rear 6 degrees/10 degrees,

- tyres on the front and back of flexible plastic single,

- trolley equipped with a glazed, closed cabin,

- cushioned cabin, equipped with outdoor air supply with the possibility of hot air supply, heating — blowout in the door,

- cabin equipped with an adjustable seat with a seat belt,

- trolley capacity 3,5 t,

- the weight of the trolley not more than 4830 kg,

- the length of the trolley with forks not more than 4 m,

- the height of the trolley not more than 2.2 m,

- minimum clearance under the mast 13,5 cm,

- ability to overcome elevations (with cargo) min. 30%,

- trolley equipped with a fork length of 1,2 m, with the possibility of manual pulling, a fork capacity 1750 kg and interchangeably with a hydraulic gripper for baled recycled materials- — gripper dissection range: folded gripper not more than 60 cm, unfolded gripper not less than 185 cm, minimum grab capacity 2 200 kg, gripper arm length 1 m, width 55 cm,

- trolley equipped with four independent hydraulic sections,

- trolley equipped with cushioned seat,

- trolley equipped with front and rear lights and blinkers,

- trolley equipped with an orange signal light,

- trolley equipped with a sound signal when driving back,

- a machine equipped with a pin pin on the back,

- complete factory new assembled machines, not prototypes, delivered to the premises of the Contracting Authority,

- descriptions and menus of machines in Polish. English-language communications are allowed,

- machines marked with CE mark,

- machines filled with consumable fluids, supplemented with fuel to full,

- training in Polish of the Contracting Authority personnel in the field of operation and ongoing maintenance of machinery,

- transfer of machine documentation, including CE declaration of conformity, manual and maintenance of machines, warranty books. Documents - instructions for operation and maintenance of machines, warranty books drawn up in Polish. List of errors in European language are allowed,

- drawing up the necessary documentation, submitting on behalf of the Contracting Authority requests for testing prior to the first decision authorising operation, participation on behalf of the Contracting Authority in UDT studies, submitting to the Contracting Authority the books of revision of technical equipment for machines required by technical supervision regulations together with UDT positive decisions.

Minimum warranty period for the subject of the order:

24 months and 4000 hours of operation depending on what comes first for the forklift with counterweight.

MORE INFORMATION IN THE DOCUMENT PN. “OFFER INQUIRY” 18/NFOSIGW/2021 AVAILABLE AT THE CONTRACTING AGENT: http://www.eko-mysl.pl/zapytania-ofertowe/