In support of NLB’s fleets of floating Aids-to-Navigation (AtoNs) and their ongoing statutory duties, NLB use significant quantities of mooring equipment
The majority of mooring components will be used in the deployment of navigational buoyage. Navigational buoys serve as markers for navigation in many of the channels, coastal regions and seaways of the United Kingdom and Ireland. NLB service these out of Oban and currently have circa 200 buoys within their waters.
This Invitation to Tender process addresses the interim requirements for NLB until another collaborative GLA procurement for mooring-related components is put in place. This requirement covers an eighteen month period to bridge the gap before a joint GLA procurement is established.
Requirements are for 4 sizes of chain (19mm to 38mm) supplied in 100metre lengths. Forelock and clenching shackles and 5 tonne Sinkers.
All components must comply with Lloyds Rules ISO 1704
Material Requirement : U3 to Lloyds Rules.
In support of NLB’s fleets of floating Aids-to-Navigation (AtoNs) and their ongoing statutory duties, NLB use significant quantities of mooring equipment
The majority of mooring components will be used in the deployment of navigational buoyage. Navigational buoys serve as markers for navigation in many of the channels, coastal regions and seaways of the United Kingdom and Ireland. NLB service these out of Oban and currently have circa 200 buoys within their waters.
This Invitation to Tender process addresses the interim requirements for NLB until another collaborative GLA procurement for mooring-related components is put in place. This requirement covers an eighteen month period to bridge the gap before a joint GLA procurement is established.
Product Requirements
DescriptionQuantity
CHAIN - 19MM OPEN LINK – METRE*300
CHAIN - 26MM OPEN LINK – METRE*400
CHAIN - 32 MM OPEN LINK – METRE*500
CHAIN - 38 MM OPEN LINK – METRE*1,500
SHACKLES FORELOCK TO SUIT 38-42MM CHAIN400
SHACKLE - CLENCHING - TO SUIT 38-42MM CHAIN200
SINKER - 5 TONNE5
*Supplied in 100m lengths
Material Specification Requirements (as detailed in Appendix A)
Where called for all chain and shackles shall conform to the recommendations
of the following international and British Standards:
Lloyds Rules
ISO 1704
MATERIAL
U3 to Lloyds Rules