The object of this procurement is respirators FFP2 and FFP3 and masks for surgical/medical procedures.

The mask must comply with Type IIR standard, bacterial filtration efficiency not less than ≥ 98%, permeability level 49Pa, liquids injection protection ≥120mmHg. At least three layers, a metal strip (nasal clip) allows softly and smoothly molding according to the shape of the nose, maintaining its molded shape throughout the entire period of use. The mask must cover the face so that there are no air gaps between the face and the mask. When inhaled, the mask should not move in the direction of inhalation, the open folds of the outer surface of the mask should be directed down, the inner layer should not allocate flakes, minimal odor.

Packed in a box without a plastic bag, all masks must be stacked in one way (outer side top). Masks must be taken from the box one by one (the gums should not be knotted with each other).

The type of mask must be clearly understandable on the box. Medical masks must comply with EVS-EN 14683:2019

Designed by the manufacturer for use in health care facilities in activities related to patients; with vertical folds, foldable mask (folder type). To the wearer tightly against the face fit, without flaps. Material- polypropylene. Nose clamp flexible metal (aluminum or double steel wire). The length of the nasal bulb should be 2/3 of the length of the upper edge of the mask. Fixing with two rubber bands behind the ear. Continuous use duration of at least 4 hours. Protection against airborne particles and microorganisms with a particle diameter of 0.6 microns. Filtration capacity minimum 94%. Each of the masks separately packed and nominal protective factor FFP2. The mask must fit tightly to the face to prevent air leakage. The inner layer should not allocate linds, and the product may have only a minimal odor. Masks should not be of brittle material (feature: masks tear when taken out of the package and/or use). Possesses the CE designation. Compliance with European Union standard EN 149:2001+A1:2009.

For use in the health facility provided by the manufacturer in activities related to patients; with a 3-panel design, the upper seam of the mask must be equipped with a metal nose clamp. At the top of the nose clip and inside with a strip of sweat absorbent material, fits tightly against the face of the wearer, adjusts to facial movements during talking, does not slip, fastening with 2 rubber behind the occiput; flap or covered with exhalation valve in front of the mouth on the central panel; filters at least 99% in the air particles found; continuous use with a duration of 8 hours.Protection against airborne particles and microorganisms with a particle diameter of 0.6 microns). The inner layer must not allocate linds, and the product may have minimal odor. Packaged one by one, the packaging is easy to open. Masks should not be of brittle material (feature: masks tear when taken out and/or used). Nominal protection factor FFP3. Complies with EU standard EN 149:2003 +A 1:2009 (PPSE EU Regulation 2016/425). Possesses the CE designation.