Supply, assembly and training for EDF-ALN-SETRAL of a modular flatbed type trailer in 20 axle lines - 2 files. This vehicle is intended for the transport of heavy parcels (up to 280 tons) on public property.
The modular trailer, assembled in its entirety, represents 20 axle lines in 2 lanes:
It is composed of 2 modules 6 lines-2 files and 2 modules 4 lines-2 files. The preferred assembly will be 4 - 6 - 6 - 4.
All modules are interchangeable in the composition of the trailer (no response with higher bending moment modules at critical points and lower than others).
The trailer can be towed indifferently in one direction or the other, with reversal of tractors on the road.
Regardless of the assembly configuration, it is possible to use a pusher vehicle.
Supply, assembly and training for EDF-ALN-SETRAL of a modular flatbed type trailer in 20 axle lines - 2 files. This vehicle is intended for the transport of heavy parcels (up to 280 tons) on public property.
The modular trailer, assembled in its entirety, represents 20 axle lines in 2 lanes:
It is composed of 2 modules 6 lines-2 files and 2 modules 4 lines-2 files. The preferred assembly will be 4 - 6 - 6 - 4.
All modules are interchangeable in the composition of the trailer (no response with higher bending moment modules at critical points and lower than others).
The trailer can be towed indifferently in one direction or the other, with reversal of tractors on the road.
Regardless of the assembly configuration, it is possible to use a pusher vehicle.
All the elements necessary for the operation of the trailer in all configurations with tractor and "pusher" are provided:
The front and rear elements (sleepers or assembly accessories) supporting the tractors' attachment points, lighting, signalling, the various control elements, etc.
- The accessories necessary for the proper functioning at full hydraulic, electric and pneumatic capacity of the trailer: auxiliary group(s), accessories of mechanical, hydraulic, electrical connections between the trailer elements on the one hand and the trailer and tractors on the other hand.
- A drawbar for traction and a push bar compatible with the rudders of SETRAL heavy tractors and sized for the loads to be transported. These two bars will be associated with systems (springs, jockey wheels) allowing them to be hung on the trailer once the tractors are uncoupled but also operated by hand once detached from the two vehicles.
Particular attention will be paid to offering the set with the smallest possible tare weight and the most limited road height possible.
Assembled in whole or in part, its overall width does not exceed 3000 mm.