The process intends to supply and install a nano-CT / micro-CT (computed tomography) with appropriate measuring station equipment (associated software, workstations, test equipment and accessories). This includes measuring large specimens up to a height of 650 mm and a weight of up to 20 kg. The opening of the sample chamber should be at least 700 x 600 mm in order to be able to install special larger samples (cultural goods) in the chamber. Special sample holders for temperature control as well as the application of a tensile and compressive stress should also be included in the offer. In addition to the control computer, two workstations are required to carry out the various investigations and processing on measured data and models in parallel. Furthermore, the test chamber must be visually monitorable through a window or a camera during the measurements. The device must have a valid CE certification and conformity

Please note: Innovent e.V. is NOT a public client according to § 98 ff. GWB, but must carry out the intended procurement under the provisions of public procurement law as a result of the use of subsidies in accordance with the Funding Directive or the funding conditions.

The object of the contract includes a micro/nano computer tomograph including necessary peripherals for proper use. This includes measuring large specimens up to 650 mm high and weighing up to 20 kg. The opening of the sample chamber should be at least 700 x 600 mm in order to be able to install special larger samples (cultural goods) in the chamber. Special sample holders for temperature control and the application of tensile and compressive stress should also be included in the offer. In addition to the control computer, two workstations are required to perform the various investigations and processing of measured data and models in parallel. In addition, the test chamber must be visually monitored through a window or camera during measurements. The device must have a valid CE certification and conformity and be a full protection device in accordance with §21 of the Radiation Protection Ordinance.

The device is to be used in cultural protection, microelectronics, polymers, coating, damage cases, biomaterials and bonding, as well as 3D printing.

Please URGENTLY observe the associated award conditions as well as the specifications, which contain the following points:

1. Specifications: Technical execution

1.1. Specifications computed tomography

1.2. Specifications sample days

1.3. Specifications workstations

1.4. Software Specifications

2. Operating conditions

3. Service

4. Warranty, warranty, spare parts

5. Availability of services

6. Delivery, documentation, instruction