Architectural, construction, engineering and inspection services | Tenderlake

Architectural, construction, engineering and inspection services

Contract Value:
-
Notice Type:
Contract Notice
Published Date:
03 December 2021
Closing Date:
03 January 2022
Location(s):
FI1B1 Helsinki-Uusimaa (FI Finland/SUOMI / FINLAND)
Description:
Vantaa Vocational College Acquisition of Varian Vehkala's base building design

VTK Properties Oy will build a new educational institution building for Vantaa Vocational University Varia in Vantaa, Vehkala district.

The project plan for the new educational institution building in Varian Vehkala was approved by the city government of Vantaa on 6 September 2021 and the proposal planning phase of the project is scheduled to begin in December 2021.

The total scope specified in the project design of the target is 23,830 brm2. Varian Vehkala Vocational University Building will be located for a total of 2130 students in the following fields: Social and Health, Electrical and Automation, Information and Telecommunications Technology, Automotive, Aircraft and Logistics.

The cost estimate for the project calculated on the basis of the project plan is €78,200 000 (0% VAT).

The destination will be located in Vehkala, West Vantaa, in the immediate vicinity of the junction area between Kehä III and Kehhärada to the west of Vehkala Station. The station formula for the site of construction has been approved, and pre-construction of the site has been carried out during 2019. Construction of the street network in the area is ongoing. Operations to the destination will take place through the new Vehkalantien, which is being built from the direction of Härkähaantien and Sanomatie. Outside the plot, areas to the south-west of Vehkalantie are reserved for professional college car parks.

Specific features of the design of the subject are the diverse spatial needs of the educational fields of engineering, which create widely varying requirements, especially for the design of house engineering systems, fire engineering, and target conversion and operational flexibility objectives. In addition to large board rooms in engineering disciplines, the entry or throughput requirements for several halls significantly define the massing of the building. The yard area is used as a driving training and car park for heavy equipment, due to which specific requirements for yard load-capacity, stormwater removal systems and area fencing and ramping should be taken into account in the design. The site is also located in the Helsinki — Vantaa airplane noise area and immediately in the vicinity of Kehä III, which should be noted in the design of sound insulation and noise control. In addition, fine particulate matter and other emissions from Perimeter III should be taken into account. In accordance with the requirement set out in the station formula, at least 50% of the energy used by the object must be generated on the plot using renewable energy forms. For this reason, part of the heating energy will be carried out by the geothermal system, as well as part of the electricity and/or heat generation by the solar collector.

A more detailed description of the project, project objectives, timetable and format of implementation is set out in the Annex

The procurement includes the duties of a foundation construction planner under Section 120c of the Land Use and Construction Act and the tasks set out in this request for tenders and the tasks set out in this request for tenders.

The planning tasks include the design preparation of the Directory of the Base Construction Task List GEO18 (Annex 6) — K warranty period, with the supplements and delineations set out in the lists of assignments and in this call for tenders and annexes.

According to the subscriber's view, the project's ground building design function is required by the requirements of metropolitan building control (https://www.toptenrava.fi/doc/tulkintakortit/MRL-120f03A.pdf)

in accordance with the instructions. The final class of requirements for a design task is defined at the start of planning, together with building control. The tenderer is responsible for ensuring that the key persons appointed by it are qualified to perform planning tasks under the call for tender in this project.

The working language of the project is Finnish.

A more detailed description of the planning mandate, objectives for design, and other instructions relating to the mandate are set out in Annex 4 The planning programme.

Download full details as .pdf
The Buyer:
VTK Kiinteistöt Oy
CPV Code(s):
71000000 - Architectural, construction, engineering and inspection services
71320000 - Engineering design services