The Diagnostics Magnetics Inner Vessel Coils (IVC) are inductive magnetic sensors to measure local magnetic field in various frequency ranges. They are located on the inner surface of the ITER Vacuum Vessel (VV) in a high vacuum environment and nominal operating temperature of 150 C. As described in section 1.2 of the Technical Specification (Annex B) documents, the IVCs include 6 assemblies with each assembly comprising of a sensor head (pick-up coil) and a platform. The scope of this procedure includes:
— preparation for manufacture of the sensor heads,
— manufacture of sensor heads, and
— testing, cleaning, packaging and delivery of the sensor heads.
The supply of the sensor heads is divided into 3 lots as specified below. Please refer to the Technical Specification (Annex B) for each of the 3 lots for further details.
Please refer to the Technical Specification (Annex B) pertaining to Lot 1 (Supply of Low-Temperature Co-fired Ceramic (LTCC) Sensor Heads).
Additional information: see Internet address provided in Section I.3.
1) this notice and the rest of the procurement documents will be published also on the Joint Undertaking's buyer's profile. Economic operators are strongly advised to regularly visit the web page in Section I of this notice;
2) this procurement procedure is governed by the rules laid down by:
(a) Regulation (EU, Euratom) No. 966/2012 of the European Parliament and of the Council as amended by Regulation (EU, Euratom) No. 547/2014 of the European Parliament and of the Council (“the Financial Regulation”) and by Regulation (EU Euratom) 2015/1929 of the European Parliament and of the Council;
(b) Commission Delegated Regulation(EU) No. 1268/2012 as amended by Commission Delegated Regulation (EU) 2015/2462 of 30.10.2015 (the rules of application of the Financial Regulation); and
(c) complemented, where it derogates, by the Financial Derogation of Fusion for Energy adopted by the Governing Board on 2.12.2015. All legislation can be found inhttp://www.fusionforenergy.europa.eu/procurementsgrants/keyreference.aspx
3) in case of new contract(s) consisting of a repetition of similar works or services entrusted to the economic operator to which Fusion for Energy awarded the original contract, Fusion for Energy may use the negotiated procedure in accordance with Article 134 RAP (the duration of such contracts shall not, as a general rule, exceed 3 years).
Please refer to the Technical Specification (Annex B) pertaining to Lot 3 (Supply of Diamagnetic Coils).
Additional information: see Internet address provided in Section I.3.
1) this notice and the rest of the procurement documents will be published also on the Joint Undertaking's buyer's profile. Economic operators are strongly advised to regularly visit the web page in Section I of this notice.
2) this procurement procedure is governed by the rules laid down by:
(a) Regulation (EU, Euratom) No. 966/2012 of the European Parliament and of the Council as amended by Regulation (EU, Euratom) No. 547/2014 of the European Parliament and of the Council (“the Financial Regulation”) and by Regulation (EU Euratom) 2015/1929 of the European Parliament and of the Council;
(b) Commission Delegated Regulation(EU) No. 1268/2012 as amended by Commission Delegated Regulation (EU) 2015/2462 of 30.10.2015 (the rules of application of the Financial Regulation); and
(c) complemented, where it derogates, by the Financial Derogation of Fusion for Energy adopted by the Governing Board on 2.12.2015. All legislation can be found in http://www.fusionforenergy.europa.eu/procurementsgrants/keyreference.aspx
3) in case of new contract(s) consisting of a repetition of similar works or services entrusted to the economic operator to which fusion for energy awarded the original contract, fusion for energy may use the negotiated procedure in accordance with Article 134 RAP (the duration of such contracts shall not, as a general rule, exceed 3 years).