The subject of the contract are the supply of various products

Parameters of hospital bed linen. Hospital bed linen made of cotton-polyester fabric with a plain weave. Material composition 48% cotton (+/-3%), 52% polyester (+/-3%). Fabric weight 150 g/m2 (tolerance +/-3g/m2). Fabric with construction: number of threads after the warp min. 76 per inch, number of threads by thread min. 62 per inch. Fabric with the following strength parameters: breaking force after warp min. 790 N, breaking force after weft min. 450 N. The fabric from which the hospital bed linen will be made meets the CEN/TS 14237 standard - table 1. (Attach to the Offer a document on compliance with the standard, a Certificate and a report issued by an independent research unit confirming the parameters of the standard). Durable fabric, which does not change its physical properties under the influence of industrial washing at 65 degrees Celsius. The fabric is durable, does not change its physical properties under the influence of pressing at temperatures up to 200 ° C. Maximum shrinkage of the finished product up to 5%. Marking: MARCINIAK HOSPITAL – Wrocław. Marking with a durable, resistant to washing at high temperatures print with a size of letters 0.6-1 cm in 2 corners on each side of the bedding. Technical sheet of the fabric confirming the grammage and composition. (Join the Offer). Each assortment must be marked with an individual barcode compatible with the RFID HF radio tag sewn in.

A digital scale used to measure the body and determine other factors affecting health and fitness. Working in accordance with the B.I.A. basis, which allows for quick measurement of body weight components. Beurer Bf 1000 Precision scale. Minimum 24 months warranty

Electronic personal scale on wheels with telescopic stadiometer with legalization. Load capacity at least 200 kg. Power adapter included. Minimum 24 months warranty

Electronic personal scale on wheels with telescopic stadiometer with legalization. Load capacity at least 300 kg. Power adapter included. Minimum 24 months warranty

Wheelchair. Manual wheelchair made on an aluminum frame, type of brakes: pressure, possibility of folding the wheelchair, method of folding the wheelchair: folded on a cross. Equipped with footrests with the possibility of their tilting and the possibility of height adjustment. Foot under the leg for tilting the stroller. Upholstery material: dark nylon. Armrests: long, removable. Type of rear wheels: tubeless, type of front wheels: tubeless. Frame color: to be agreed. Maximum weight for user: minimum 130 kg. Weight: 17 kg (+/- 2 kg). Seat width: 44-50 cm, seat depth: 44-46 cm. User manual in Polish. CE declaration of conformity in Polish. Minimum 24 months warranty.

Children's wheelchair with drip boom. Manual wheelchair made on an aluminum frame, type of brakes: pressure, possibility of folding the wheelchair, method of folding the wheelchair: folded on a cross. Equipped with footrests with the possibility of their tilting and the possibility of height adjustment. Foot under the leg for tilting the stroller. Upholstery material: dark nylon. Armrests: long, removable. Type of rear wheels: tubeless, type of front wheels: tubeless. Frame color: to be agreed. Maximum user weight 60 kg. Weight: 17 kg (+/- 2 kg). Seat width: 32-36 cm, seat depth: 32 cm. User manual in Polish. CE declaration of conformity in Polish. Minimum 24 months warranty.

Toilet and shower wheelchair. Toilet and shower trolley with height adjustment. Height adjustment in the range of 47.5-60 cm. Backrest and seat made of PVC. Adjustable seat height. Slide-in footrest up the seat. Hinged and removable armrests. Equipped with 4 wheels with brake. Maximum load of at least 130 kg. Bar and positioning belt included. Minimum 24 months warranty

Mobile drip stand with height rgulation. Equipped with four hangers with a maximum load of at least 2.5 kg each. Stand base made of plastic with 5 wheels with brakes. Minimum 24 months warranty

Single-leaf medical screen on wheels with a washable screen. The screen screen is made of waterproof, vapour permeable and ignition-resistant material. The construction is made of powder-coated metal tubes with the function of connecting with buckles to any number of wings. Dimensions at least width 82 cm; height 165 cm; depth 58 cm. Equipped with swivel castors with brake. Minimum 24 months warranty

Tray for surgical instruments made of stainless steel with min. dimensions 350x235x10 mm

Catheter container with a minimum size of 12x60x540 mm. Rail mount made of anodized aluminum. Stainless steel container with transparent plastic front.

Belt-roller conveyor for safe horizontal transfer of the patient (from bed to wheelchair, from trolley to operating table, etc.). Aluminum construction, rollers on ball bearings for smooth gliding. Minimum load capacity 160 kg. Damage-resistant tape and easy to wash and disinfect. PVC-coated tape, covered with acrylic lacquer from both sides, resistant to microbial and fungal attack, UV protection. Tear resistance 250 N, according to DIN 53363. Minimum 24 months warranty. Authorised as a medical device.

"Medical desk 140 -rectangular desk with maple colored top. Laminate in semi-matt or glossy finish. Steel frame gray, smooth. Dimensions: width 140cm x depth 60cm x height 72-75cm.

1) Countertops made of three-layer chipboard with the following parameters:

a) table thickness: 22-25 mm, density not less than 680 kg / m3, hygiene class E1, board laminated on both sides with HPL laminate with a thickness of at least 0.6 mm, edge of the board covered with ABS edging 1.5 mm-2 mm thick in laminate color, countertops equipped with a through socket installed in the countertop, color identical to the color of the laminate blinded by a grommet.

2) Frames and legs:

a) frame and four legs of the desk made of steel profiles, powder coated (paint resistant to mechanical damage

and UV radiation) or chrome-plated,

b) factory-mounted frame, tight to the table top (frame fastening leaving no clearance between the top and the frame) along its entire contour, 4 legs with a closed cross-section mounted to the frame,

c) legs equipped with feet to prevent damage to the ground. Minimum 24 months warranty

"

"Mobile under-desk container (Eb2): Mobile container on wheels, maple color, with 3 drawers. Laminate in semi-matt or glossy finish. Transparent rubber wheels. Dimensions: width 35-40cm x depth 55-60cm x height 52-58cm (including wheels) Drawer body/front Made of three-layer chipboard with the following parameters:

a) Drawer bodies / fronts – plate thickness 18 mm -22 mm,

b) Upper and lower wreath – plate thickness 25 mm – 28 mm,

c) Density not less than 680 kg/m3,

d) Hygienic class E1,

e) Double-sided board laminated with HPL laminate with a minimum thickness of 0.6 mm,

f) The edge of the board is covered with ABS edging 1.5 mm – 2 mm thick in the color of the laminate. Drawers 1) Each drawer equipped with a handle, handles smooth; devoid of sharp and protruding sharp finishes;

2) Central locking with patent insert, mounted in the highest drawer,

3) Drawers on system guides, metal, drawer extension min. 80% Wheels

1) 4 swivel castors (including two with brakes) adapted to hard floors (linoleum, PVC, ceramic tiles)."

"A swivel office chair designed for many hours of sedentary work.

1) Five-arm chair base on wheels, powder coated or chrome-plated.

2) Soft upholstered seat made of upholstery sponge or polyurethane foam made in injection technology (cut foam is not allowed).

3) Seat height adjustment using a gas lift.

4) Backrest tilt adjustment.

5) Armrest height adjustment.

6) Possibility of rotation of the chair around the vertical axis by 360⁰.

(7) Ergonomic mechanisms for adjusting the seat cushion height and backrest tilt shall be easily accessible and easy to operate, positioned so that they can be adjusted from a seated position.

8) Seat tilt force adjustment – synchronous deflection of the backrest and seat.

9) Backrest with adjustable tilt, possibility of locking, with antishock mechanism – preventing the backrest from hitting the back.

Wheels for hard floors.

Meeting the standards: PN-EN 1335:1;2;3 (dimensions, safety, stability and strength), PN-EN 1022 and PN-EN 1335-1.

Meets flame retardant upholstery standards: EN 1021-1, EN 1021-22 or BS5852 for source 0 (match) and source (match).

Compliant with the requirements of Regulation Minister of Labour and Social Policy of 1 December 1998 on occupational health and safety at workplaces equipped with screen monitors (Journal of Laws No. 148, item 973). Upholstered with beige or gray eco-leather (waterproof, washable, resistant to commonly used washing / disinfecting agents; mounted on a five-arm chrome base. The ordering party plans to order about 30% of upholstered chairs upholstered in dark fabric for administrative employees. Dimensions: total height from the level: 970-1180mm, backrest width: 420-460mm, seat width: 460-500mm, seat depth: 420-450mm, seat height: 435-570mm. Minimum 24 months warranty

"

Blanket with dimensions of 160x200cm (acceptable margin up to + 5cm). Made of acrylic or jacquard-cotton mixtures. Weights at least 430 g/m². The offer should be accompanied by: 1. Technical sheet of the fabric confirming the weight and composition. 2. Instructions for use and washing in Polish. Each assortment must be marked with an individual barcode compatible with the RFID HF radio tag sewn in. Warranty not less than 12 months.

Mattress in a zipper cover from 3 sides measuring 200x90x15 cm. The mattress is made of certified polyurethane foam with T25 elasticity and hardness. Cover made of certified waterproof fabric protecting the mattress, pillow, duvet against moisture, dirt and damage. The fabric of the cover should be pleasant to the skin, vapor-permeable, breathable, not causing allergies and skin burns. The product is easy to clean, with the possibility of washing at 95°C, disinfection and sterilization. Cover fabric with barrier properties, in accordance with the requirements of ISO/TC 94 / SC 13 N357 and CIOP procedure No. NOU-27.

Complete pressure swing mattress (mattress + cover + pump) for anti-decubitus therapy designed for hospital care: • Pneumatic anti-decubitus pressure swing mattress compatible with a sponge bed mattress with dimensions - length 195 cm x width 85 cm x height 15 cm, for anti-decubitus therapy for patients weighing not less than 140 kg, with transport function. • Mattress cover compatible with bed mattress with dimensions as above (+/- 2 cm) fastened with a minimum of 4 straps enabling stable attachment of the anti-decubitus mattress to the bed mattress, fastened with a zipper. • Anti-decubitus mattress for two-stage therapy, built of a minimum of 18 tubular chambers, transverse made of polyurethane, with a height of 12 cm (+/- 1cm), the chambers are filled with air and emptied alternately every second – 1:2 system, with the function of quick deflating with a CPR valve in no more than 15 seconds, equipped with a system of moving air between the chambers to facilitate quick filling, equipped with floor flaps to stabilize the mattress with the bottom bed mattress. • Mattress pump: - handle for hanging the pump on the bed frame, - power supply 220-230V, - pressure range for pump operation: 50- 100 mmHg (+/- 5 mmHg) adjustable by a manual knob, pump equipped with an air filter, - operating mode: variable pressure with a cycle time of 10 min. (+/- 2 min) - low noise level below 40 dB, - the pump has a socket for connecting two air lines. Minimum 36 months warranty. The contracting authority requires the submission of documents certifying that the manufacturer uses a system compliant with ISO 13485:2016 or equivalent, and that the product has a CE marking that meets EU directives.

Variable pressure mattress (mattress + cover + pump) straight-chamber, for long-term care with a height of 11-12 cm (+/- 1 cm) made of polyurethane. Mattress design for easy and quick replacement of air chambers. Two-section mattress with dimensions 195x85 cm (+/- 2 cm), mechanical strength ≤ 180 kg, minimum number of transverse chambers 18. The mattress should be equipped with a quick connector, a system of stabilizing belts for the mattress, four transport handles, a membram cover fastened with zippers. Low-pressure mattress pump, variable pressure with adjustable control system, volume ≤ 24 with pressure range in mmHg - 20-60, cycle time - 12-15 min, manual or touch control, improper pressure alarm, hooks for hanging on the bed. Warranty for pump and mattress 3 years. The contracting authority requires the submission of documents certifying that the manufacturer uses a system compliant with ISO 13485:2016 or equivalent, and that the product has a CE marking that meets EU directives.

Belt for complete immobilization of hands with magnetic fastening for aggressive patients, directly attached to the bed frame. Sizes: M- wrist circumference 16-24 cm, L - wrist circumference 22-29 cm. Equipped with a patent lock for fastening the belts and a magnetic key for quick opening of the patent lock. Belt washing temperature 90 ° C.

Belt for complete immobilization of feet with magnetic fastening in aggressive patients, directly attached to the bed frame. Sizes: M- ankle circumference 22-30 cm, L - ankle circumference 27-33 cm. Equipped with a patent lock for fastening the belts and a magnetic key for quick opening of the patent lock. Belt washing temperature 90 ° C.

Multifunctional belt with velcro fastening to secure patients sitting in wheelchairs. Velcro fastening overlapping at least 25 cm, belt width minimum 14 cm. Size M - total length min. 200 cm circumference at fastening 135-175 cm, size L-240 cm circumference at fastening 175-215 cm. Belt washing temperature 30 ° C.

Pillow type "hose" for lateral positioning of the patient. Equipped with EasyShape® system and removable POLYMAILLE® cover

Universal positioning pillow standard medium: helping to support the patient, stabilize the obtained position, protects places exposed to pressure. Filling from microbeads - expanded polystyrene with small granulometry, non-flammable product. Synthetic fiber filling - strong and resistant to stretching and shrinkage, retains volume, guaranteeing a feeling of softness and comfort, non-flammable product. Polymaille bi-elastic cover - stretches when moving the patient. Waterproof and breathable, antibacterial and antifungal properties, non-slip base, zipper on three sides - easy to remove for washing. Washing at temperatures up to 95 degrees Celsius. Size 56cm x 40cm.

Positioning pillow to prevent bedsores, cylindrical shape. Polystyrene ball filling for proper blood circulation. Size Ø 15 cm x 70 cm.

Ring anti-decubitus disc, positioner under the heels, head and tailbone designed for people at risk of pressure ulcers on the heels, elbows, head or coccyx. Medical device, minimum size 18 cm.

Universal openwork rack made of corrosion-resistant chrome-plated steel, with five openwork shelves with a load capacity of at least 90 kg each, with the possibility of adjusting the position of the shelves. Dimensions: width 90 cm (+/- 2 cm) x depth 40 cm (+/- 5 cm) height 200 cm (+/- 2 cm). Leg feet made of plastic with the possibility of leveling, with protection against damage to the floor. Minimum 24 months warranty.

Medical cabinet with glass doors - standard, made of powder-coated steel, safety glass in the door. Cabinet dimensions 1950x920x400mm (+/- 10mm). Cabinet color to be agreed. Shelf load capacity minimum 50 kg. Minimum 24 months warranty. The product meets the requirements of European Union directives.

"One-door medical cabinet, standard - with glazed doors, color negotiable height 2000x500x560 mm (+/- 20 mm for each dimension). Minimum 24 months warranty. The product meets the requirements of European Union directives."