Lot 14 screed, waterproofing, tile work

Execution of composite screed CT-C40, cement screed CT-C30-F5, leveling insulation, leveling screed as sloping screed, mineral bonded waterproofing, seals and floor strips including connections, etc.

Screed:

- approx. 385 m 2 Substrate preparation concrete ceiling slab, milling + shot peening for composite structures,

- approx. 385 m 2 Install composite screed CT-C40-V as a low-shrinkage, rapid screed on a slope, installing between 95-100 mm

- approx. 450 m 2 Install compensation insulation made of PS rigid foam, EPS, d approx. 40-100 mm,

- approx. 300 m 2 Install leveling screed as sloping screed, cement screed CT-C20-F4, diameter 35-85 mm,

- approx. 420 m 2 Cement screed CT-C30-F5 as a floating screed, partly on a slope, for tiling, d approx. 70 mm,

- approx. 300 m 2 Cement screed CT-C30-F5 as heated screed, on a slope, for tiling, d approx. 80-85 mm.

Seal:

- approx. 385 m 2 Apply mineral composite waterproofing W3-I / high to the floor and plinth surfaces of the hall-pool surrounds, including processing of built-in elements,

- approx. 650 m 2 Apply mineral composite waterproofing W3-I / high on floor and base surfaces in functional buildings / saunas, including processing of built-in elements,

- about 400 m 2 Apply mineral composite waterproofing W3-I / high on wall surfaces in functional building / hall, including processing of built-in elements,

- create approx. 1,300 m of movement and edge connection joints,

- Sealing of a paddling pool / SplashPad - approx. 150 m 2 Floor and plinth surfaces, bonded seal in accordance with DIN 18335 - 1, water exposure class W1-B.

Tiles:

- approx. 1 000 m 2 Laying floor tiles, BWG A + B, pool surrounds, functional construction and sauna, formats mainly 30 x 60 cm,

- about 700 m cove base, laid,

- approx. 30 m 2 Laying floor tiles BWG C paddling pool, SplashPad, format 10 x 20 cm,

- approx. 9 m ceramic lining "Finnish gutter",

- approx. 9 m ceramic cladding pool entrance stairs paddling pool - 2-tier,

- Approx. 120 m of cladding on the plinth accompanying the facade, especially 45 x 50 cm, floor tiles, BWG B, format 30 x 60 cm,

- approx. 350 m 2 Lay wall tile coverings, formats 10 x 30 cm,

- Associated joint designs, corner and end profiles,

- Install 2 clean-off zones approx. 3.0 x 1.85 m.