The subject of the order is the successive delivery of sterile single-use medical devices for the needs of the District Health Centre Sp. z o.o. in the restructuring in Otwock. For a detailed description of the item of the order, see Annex 1A to SWZ. Proceedings were divided into 69 packages (tasks).

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.

1. The exact scope of the object of the contract is described in Annex 1A to SWZ, i.e., the assortment form - price, i.e. connector No 1A.

2. The Contractor may offer only devices that have been placed on the market in accordance with the provisions of the Act of 20 May 2010 on Medical Devices (Journal of Laws of 2020, item 186).

3. The Contractor is required to provide the trade name of the product, the manufacturer's name and the catalogue number for each product offered (Annex No 1A to SWZ — assortment - price form). In the case of the catalogue number for the given assortment item, you must enter the information on the absence of the number.

4. The Contractor's failure to provide the trade name of the product, the name of the manufacturer and the catalogue number for each product offered, or to indicate by the above product information of parameters inferior to those required by the Contracting Authority, will not be correctable in the manner of Article 223 (2) (3) act Pzp because it would constitute an unacceptable change in the content of the offer, which will result in the rejection of the Contractor's offer under Article 226 (5) of the Pzp Act.

5. Failure to specify a catalogue number is possible only if the product does not have this type of designation. In such a situation, it is necessary to specify unequivocally by entering the phrase “no catalogue number” or any other determination from which it will be unequivocally derived.

6. The Contracting Authority shall require that the goods delivered have information on the package about the date of usefulness/expiry date, provided that the expiry date shall not be less than 12 months from the date of delivery.

7. In view of the specifics of the object of the contract and the inability to predict the actual demand, the Contracting Authority reserves the right to transfers in the tangible and quantitative scope of the goods, provided that the amendments made may not result in exceeding the amount of the financial liability specified in the offer and the contract concluded.

8. The Contracting Authority shall require the duration of the completion of the supplementary order and the replacement of the goods defective or incompatible with the contract to be not more than 48 hours from the time of notification by the Contracting Authority.

9. Duration of the order: 12 months from the date of signing the contract.

10. Orders will be completed successively, in accordance with the current requirement of the Ordering Party up to 2 working days from the date of sending the order.

11. List of statements made with the offer:

1) Declaration of the absence of grounds for exclusion from proceedings made in the form of a Single European Procurement Document (JEDZ) - according to the model set out in Annex 2 to SWZ.

(a) The declaration constitutes a preliminary confirmation that the contractor is not subject to exclusion and fulfils the conditions for participation in the proceedings as appropriate as at the date of submission

(b) A declaration shall be made by each of the contractors jointly applying for a contract award.

The statement is intended to demonstrate a lack of grounds for excluding each of the contractors.

12 Requirements to be met by an offer made by two or more entities (Contractors applying jointly for a contract award e.g. consortia, civil companies):

1) The Offer must be signed in such a way that it legally obliges all Contractors jointly applying for the award of the contract

2) Contractors acting jointly shall establish a proxy to represent them in the award procedure or to represent them in the proceedings and conclude a public procurement contract.

3. Any correspondence and settlement shall be made only with the entity acting as a representative of the others.

4) Any Contractors jointly applying for contract award is not allowed to participate in more than one group of Contractors jointly applying for a contract award.

And according to SWZ records.