- Multi-purpose implement carrier with municipal hydraulics
- Motor power at least 200 KW
- Device drive via front PTO shaft and municipal/power hydraulics
- A replacement steering/tilting cylinder is not required
- Installation and operation of front and rear-mounted devices
- The front axle load and payload must be suitable to accommodate 5 m3 attachment spreader/FS30 and a front snow plough (approx. 1.1 t / front attachment) in the winter period, as well as a milling slingshot (up to approx. 1.7 t / front attachment) instead of a front snow plough in individual cases.
In summer use, the mowing combination advertised here (temporarily with hedge trimmer) is to be operated. A torsion frame for load balancing is to be planned if necessary!
- In the driver's cab 1 / 12 volt socket and 2 / 24 volt sockets (for mower and
Attachment spreader) as well as the standardized interfaces for the attachment/attachment devices (UES 6)
Delivery of a multifunction equipment carrier- Multi-purpose implement carrier with municipal hydraulics
- Motor power at least 200 KW
- Device drive via front PTO shaft and municipal/power hydraulics
- A replacement steering/tilting cylinder is not required
- Installation and operation of front and rear-mounted devices
- The front axle load and payload must be suitable to accommodate 5 m3 attachment spreader/FS30 and a front snow plough (approx. 1.1 t / front attachment) in the winter period, as well as a milling slingshot (up to approx. 1.7 t / front attachment) instead of a front snow plough in individual cases.
In summer use, the mowing combination advertised here (temporarily with hedge trimmer) is to be operated. A torsion frame for load balancing is to be planned if necessary!
- In the driver's cab 1 / 12 volt socket and 2 / 24 volt sockets (for mower and
Attachment spreader) as well as the standardized interfaces for the attachment/attachment devices (UES 6)
Mähkombination-Bedarfsposition- Multi-purpose implement carrier with municipal hydraulics
- Motor power at least 200 KW
- Device drive via front PTO shaft and municipal/power hydraulics
- A replacement steering/tilting cylinder is not required
- Installation and operation of front and rear-mounted devices
- The front axle load and payload must be suitable to accommodate 5 m3 attachment spreader/FS30 and a front snow plough (approx. 1.1 t / front attachment) in the winter period, as well as a milling slingshot (up to approx. 1.7 t / front attachment) instead of a front snow plough in individual cases.
In summer use, the mowing combination advertised here (temporarily with hedge trimmer) is to be operated. A torsion frame for load balancing is to be planned if necessary!
- In the driver's cab 1 / 12 volt socket and 2 / 24 volt sockets (for mower and
Attachment spreader) as well as the standardized interfaces for the attachment/attachment devices (UES 6)
Aufsatzstreuer-Bedarfsposition- Multi-purpose implement carrier with municipal hydraulics
- Motor power at least 200 KW
- Device drive via front PTO shaft and municipal/power hydraulics
- A replacement steering/tilting cylinder is not required
- Installation and operation of front and rear-mounted devices
- The front axle load and payload must be suitable to accommodate 5 m3 attachment spreader/FS30 and a front snow plough (approx. 1.1 t / front attachment) in the winter period, as well as a milling slingshot (up to approx. 1.7 t / front attachment) instead of a front snow plough in individual cases.
In summer use, the mowing combination advertised here (temporarily with hedge trimmer) is to be operated. A torsion frame for load balancing is to be planned if necessary!
- In the driver's cab 1 / 12 volt socket and 2 / 24 volt sockets (for mower and
Attachment spreader) as well as the standardized interfaces for the attachment/attachment devices (UES 6)