21E0358 Roller Test Bench for Complete Vehicle Tests

Procurement documents are only made available electronically.

Tender documents can be downloaded free of charge from the Rhineland-Palatinate procurement marketplace www.vergabe.rlp.de until the offer period expires. The general terms and conditions of the award market place apply.

— roller test bench with adjustable center distance of 1 800-3 000 mm for 2-axle cars and light commercial vehicles up to 3.5 t with 2 or 4 wheel drive, rated power (total power) 150 kW,

— 1 pc base frame made of steel for holding the roller sets,

— 2 pcs. caster roller set with 2 individual 48" rollers on one axle including metal moulding,

— 2 pcs. brakes for decelerating the castors,

— 1 hour auto wheelbase adjustment between 1800 and 3000 mm,

— 2 pcs. drive unit with AC machine p.a.

— 2 pcs load measuring device (traction force) p.a.,

— 2 pcs. incremental encoder with direction detection and speed measurement p.a.,

— 1 pc calibration device of the measurement technology used,

— 1 pc power cabinet for driving the roller test bench,

— 1 pc control cabinet cooling by air/air cooling units for drive power cabinet 4,

— 1 pc pneumatic test bench supply unit (option),

— 1 pc cover of the entire test bench surface accessible,

— 4 pcs side protective cover to protect operators,

— 2 pcs automatic centering unit for optimal alignment of the vehicle

— 2 pcs automatic cover of the caster roller set,

— 1 set of tensioning rails for holding the bonding,

— 1 pc. speed-controlled air vent 65 000 m 3,

— 1 pc power cabinet for the blower,

— 1 pc control cabinet cooling by air/air cooling units for the blower power cabinet,

— 1 pc control cabinet for machine control including PLC (preferably Siemens S7),

— 1 pc remote control for basic control functions of the test bench,

— 1 pc fire or gas alarm system with defined test bench shutdown,

— 1 pc. 19" computer system for operation of test bench software including monitor & accessories,

— 1 pc remote maintenance option,

— 1 pc. Mutual locking/interface by means of floating contacts with the engine test bench,

— 1 pc workstation test bench driver,

— 1 pc interface to building automation via floating contacts,

— 1 pc test bench software,

— 1 pc AK interface with TCP/IP for communication with the flue gas measurement system,

— 1 pc installation material for cable routing,

— 1 pc data acquisition via front-end modules

— 1 pc measuring box for test bench sensors,

— 1 pc driver control system with predefined driving cycles consisting of PC system including monitor & accessories and interface,

— 1 pc exhaust extraction system,

— 1 pc safety device —emergency stop,

— 1 pc optical alarm unit,

— 1 pc acoustic alarm unit,

— 1 set of warning labels,

— 1 pc. clarification and commissioning of the interface to the abasm measurement system,

— 1 pc. Construction and commissioning of all mechanical and electrical components, including commissioning the test bench and associated interfaces,

— 1 pc briefing and handover to the operating personnel,

— 1 hour 4-day training at the installation site.