ETICS and exterior plastering work for the construction of a new combined bathroom system

WDVS-SYSTEM:

Substrate preparation

Approx. 450 m² protective cover / windows, doors, facades etc.

Approx. 730 m² Cleaning and checking the substrate - KS masonry / reinforced concrete

Approx. 175 m² of levelling plaster

Approx. 730 m² priming

Approx. 155 m² levelling with insulation boards 2 cm

Sockelsystem:

Approx. 255 m² pruning perimeter insulation

Approx. 168 m² plinth/perimeter insulation 035, panel thickness: 140mm

Approx. 158 m² plinth reinforcement and top plaster layer

Approx. 280 m² dimpled membrane with drainage fleece in the base area

Approx. 158 m² priming wall surfaces

Approx. 158 m² silicone resin paint base

WDVS/ EPS:

Approx. 575 m² EPS insulation boards 160 mm WLG 035

Approx. 575 m² reinforcing layer mineral – medium-layer

Approx. 240 m² allowance Additional reinforcement of impact-prone area

approx. 575 m² Zwischenbeschichtung

Approx. 575 m² mineral finishing plaster

Approx. 575 m² primer on mineral wall surfaces

Approx. 575 m² silicone resin paint façade, double

Approx. 5 pcs allowance apply colored symbolism, float

approx. 310 m² Graffitischutz

Edges, connectors:

approx. 150 m Sockelabschlussprofil

Laying approx. 80 m of edge protection

Forming an expansion joint of approx. 60 m

Approx. 335 m connection sealing with joint sealant

Approx. 127 m connection with plaster strip, windows, doors

Approx. 87 m ETICS connection to reveal plates

Approx. 455 m connection sealing with PU joint sealant

Blanket:

Approx. 250 m² MW insulation glue, 100 mm (ceilings)

Approx. 250 m² anchoring Miwo lamellar insulation boards ceiling

approx. 95 m Tropfkantenprofil

Approx. 250 m² reinforcing layer mineral – medium-layer

approx. 250 m² Zwischenbeschichtung

Approx. 250 m² mineral finishing plaster

Approx. 250 m² primer on mineral wall surfaces

Approx. 250 m² silicone resin paint façade, double

Others:

Approx. 100 pcs assembly cylinder made of EPS rigid foam

Approx. 83 pcs Mounting plate PU 200/ 200 mm, pressure-resistant

Approx. 205 m cavities Fill slots 10/2-20/4 cm

EXTERIOR PLASTERING SYSTEM:

wall:

Approx. 465 m² Cleaning and checking the substrate - KS masonry / reinforced concrete

Approx. 465 m² substrate preparation, primer

approx. 465 m² Untergrundvorbereitung, Haftbrücke

approx. 30 m² Sockelputz

Approx. 465 m² flush-mounted façade with lightweight plaster PII

Approx. 465 m² Full-surface fabric filler

Approx. 465 m² mineral finishing plaster

Blanket:

approx. 390 m² Untergrundvorbereitung, Haftbrücke

approx. 55 m² Tropfkantenprofil

Approx. 335 m² flush-mounted façade with lightweight plaster PII

Approx. 335 m² Full-surface fabric filler

Approx. 335 m² mineral finishing plaster

Others

All civil engineering and shell construction services are provided on site, and cross-trade coordination is carried out with the local construction management. An automatic coordination of interfaces to third-party trades (main construction services, ventilation, bathing water and electrical engineering) is mandatory.