Steps Wandelhalle

Installation of pressure-resistant insulation as thermal decoupling:

-Area insulation horizontal: approx. 2.80m² (geometry: approx. 4.00m*0.70m/preparation of insulation on surrounding components: 9.50m)

-Area insulation vertical (more angled): approx. 1.00m² (4.00m*0.25m)

Production of concrete substrate profiling:

-Length of edge insulation strip: 5.50m

-Length formwork: 0.20*3.80m (incl. one-sided. Bow in the Radis 30cm at the end)

-Concrete in small quantities: approx. 1.30m³

Laying natural stone block steps limestone:

-Dimensions natural stone block steps: 37x15 cm (visible appearance: approx. 35cm / visible riser: approx. 15cm)

-Length of the lower step (including the abyssed part): approx. 4.10m, of which approx. 70 cm rounded in a quarter circle

-Length middle step total (incl. abyssed part): approx. 3.50m, of which approx. 32 cm rounded in a quarter circle

-Total length of upper step: approx. 3.10m (not rounded, as it closes on both sides against rising robes)

-Primer area: 4.60m²

Installation of steps 4cm natural stone slabs:

-Total area of primer: 2.30m²

-Dimensions lower step: 2.30mx0.36m

-Dimensions upper step: 2.30m x 0.36m

-Dimension natural stone slab as an extension of the upper step between the robes: 2.25m x 0.25m

-Edelstahlstreifen (5 mmx10mm): 2x2,20m

Installation of risers and lateral stringer cladding 3 cm natural stone slabs:

-Total area of primer: 1.10m²

-Dimensions lower riser: 2.30mx0.14m

-Dimensions upper step: 2.30mx0.14m

-Dimension stringer cladding (contiguous top profiled in staircase shape: 0.72mx0.14m+0.36mx0.14m): 2 pieces per 0.20m²

-Edelstahlstreifen (5 mmx10mm): 2x2,20m

-Natursteinsilikonfuge: 3,80m