Municipal trucks with various attachments

Municipal truck consists of the following components: chassis, tipper/swap system/crane, body brine spreader for winter service

The municipal truck must comply with the applicable standards, accident prevention and labor regulations, as well as the

comply with generally accepted safety regulations.

- Vehicle type: Three-way tipper body

- Weight variant: 18 tons

- All-wheel drive with axle locks

- Emission class EURO 6 SCR

- suitable for winter maintenance operations with a snow plow

- it must be ensured that the existing snow plow can be installed

Manufacturer and type: Epoke SSL 300/3; 890 kg or Schmidt Cirron SL 34

Requirement load-sensing pump: A loud-sensing pump must be installed on the engine before coupling. For this purpose, a corresponding connection must be provided mechanically to the clutch bell.

-Snow plough plate height adjustable according to DIN 76060-A

without hydraulic pump to accommodate the aforementioned snow plows

- further technical requirements, see specifications

After the vehicle has been delivered to the construction depot of the city of Neu-Ulm, a briefing is required

carry out

The city of Neu-Ulm Baubetriebshof procures a tipper truck as part of a public tender.

Interchangeable system incl. frame with crane.

The tipper/swap system must comply with the applicable standards, accident prevention and labour regulations, as well as the

comply with generally accepted safety regulations.

The vehicle conversion and attachment of the swap system, tipper, load-sensing pump and loading crane is carried out at

a bodybuilder.

Tipper bridge

Length: approx. 5000 mm

Width: approx. 2550 mm

Spreader-frame:

Subframe detachable in quick-change device Bolts/bushings can be moved with sliding cylinder

Loading crane specifications:

Truck loading crane, superstructure between cab and tipper flanged onto the removable carrier system with tipper

Basic unit:

Lifting moment 112.2 kNm (11.4 mt)

HC1 HD4/S2 classification according to EN 12999

certification:

Declaration of conformity

CE mark ex works

Place the crane within the loading area.

(placing the gripper on the side wall is not allowed)

- further technical requirements, see specifications

The city of Neu-Ulm construction depot is procuring a

Build-up olestruer.

The body-mounted brine spreader must comply with the applicable standards, accident prevention and work regulations, as well as the

comply with generally accepted safety regulations.

Combi spreader FS 100

Single-chamber spreader

Construction on the removable frame system

Statistics with list of application rates, driving distance, driving time, operating distance and operating time

- further technical requirements, see specifications