Delivery of a 135-201 hp tractor with double-drum winch and crane
With the tractor to be procured, the following work should be possible:
- Winch-assisted timber harvesting and ridge
- Loading and unloading of goods deliveries
- Transportarbeiten
- Mulcharbeiten
- Hebearbeiten
- Path and embankment maintenance
- Mowing work
Minimum tractor requirements:
- Front loader 2.5 tons lifting capacity
- Forestry cab with all-round visibility
- Recording and operation of named attachments (without time-consuming conversion work)
- Smartes Bedienterminal
- Full frame construction with mounting frame
- Road legal, minimum speed 40km/h
- Rückfahreinrichtung
- Branch deflector with steel cables at the front
- Removable front and rear fenders
- A chainsaw mount parallel to the hood on the driver's side
Engine:
- Diesel engine, 135- 201 hp
- State-of-the-art exhaust technology
- At least 4 cylinders
- Motorvorwärmung
- Engine, transmission pan and tank protection
- Forest-grade exhaust system and forest-grade fuel tank with lateral
raised mudguards
Fahrgetriebe:
- 5-stage powershift, 4WD with differential lock and steering angle sensor
Zapfwellen:
- Automatic adhesion interruption in the event of blocking of the attached device
- 540/1000 revolutions; PTO boost
- PTO shaft must also be switchable without a driver in the cab
- Rear and front PTO
- Isobus connector at the rear
hydraulics:
-Stop valve
- Flow rate hydraulic oil, at least 200 l/min and load-sensing system
- Filled with biodegradable hydraulic fluid
- Connections for at least 3 circuits, double-acting, at least one non-pressurized return
- Rear hydraulics with joystick actuation
- Schwimmstellung
- Front hydraulics with at least two control circuits
- Rear hydarulik with 4 valves and Power Beyond valve
Cabin:
- Forestry cab with all-round visibility
- Armrest with joystick
- Passenger seat with seat belt
- Easily removable and foldable exterior mirrors
- Radio with Bluetooth hands-free system via the cabin speakers
- 2 driving lights in the cab roof
- 2 work lights each to the front and to the rear
- 2 rotating beacons yellow
- Fire extinguisher, at least 2 kg powder, incl. matching fire extinguisher holder
- First aid kit (incl. holder or otherwise easily accessible)
- Warning triangle (incl. holder or otherwise easily accessible)
- air conditioning
- Rückfahreinrichtung
- Mechanische Kabinenfederung
- Air-feathered driver's seat
- Fußraumheizung
-Cooler
Tyres/rims:
- Rear axle with at least 600 radial forestry tires
- Special rim suitable for forestry use with reinforced rim flange and encapsulated valve protection
Doppeltrommel-Aufbauwinde
- Frontseilwinde
- Pulling force max. 2x 80 kN
- Drive by front PTO 1000 rpm
- Control panel for emergency operation with emergency-stop system according to forestry standard DIN EN 17067
- Rope feed-through under the tractor
- 2 x rope entry double pulley
- 2 x rope ejection, rope braking device with on-board hydraulic supply
- at least 2 x 90 m steel cable 13 mm Ø
- mind. hochverdichtet, Mindestbruchkraft (MBK) 163.38 kN
- Radio remote control with emergency-stop system according to the new forestry standard DIN EN 17067
- Connection option for forest emergency call
- Engine start/stop, infinitely variable engine speed regulation
ladekran
- Loading crane (basic crane)
- Max. Reach horizontal 8,7m
- of which extension approx. 2x1 m
- Hubmoment Gross/Net kNm 59
- at least 42.5, lifting capacity with a reach of approx. 4 m
- Schwenkmoment (kNm) 13,5
- Schwenkwinkel (°) 380
- electro-hydraulic control valve with control.
- Control system with analog joysticks with 5 storable application settings
- LS hydraulics for electro-hydraulic control / control valves mounted in the control valve, only with KUXX-20-31, KUXX-20-33, KUXX-20-34 or KUXX-20-53
- Float position for main arm and swivel function for electro-hydraulic control / control valves
- Rotator with timber grapple 0.24 m²
- Control in tractor cab
- Storage for crane arm in the area of the A-pillar
- Anbaurahmen
- Frontstabilisator