1. The subject of the order is the delivery of implants for Dolnośląski Centrum Rehabilitacji Sp. z o. o. in Kamienna Góra.
2. A detailed description of the implants, their components and materials, as well as estimated quantities are set out in Part II of the ToR.
3. The Employer requires the Contractor to entrust the Employer with implants in the deposit. The terms of the deposit are specified in the contract template constituting part IV of the ToR.
4. The Employer requires the contractor to provide or make available to the Employer:
a) instruments (2 sets) for reconstruction of the anterior and posterior cruciate ligament by the BTB, ST, Quadriceps method - applies to task No. 4,
b) cable or battery drive (together with a charger) intended for treatments, for task No. 1 (3 sets), for task No. 2 (2 sets) - applies to tasks No. 1, 2, 6, 7, 17,
c) implantation instruments for offered implants and a cassette (basket) for sterilization of the available instruments - applies to tasks 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 20, 21, 23, 27, 28, 29.
1. Cementless press-fitt bearing - 700.
2. Insert for cementless shell - 700.
3. Ceramic insert for growing heads with size ø 28 mm ø 40 mm - 175.
4. Metal head - 1 225.
5. Ceramic head - 175.
6. Cementless pin classic straight - 613.
7. Cementless short mandrel, overbang - 263.
8. Shell made of highly cross-linked PE with the addition of Vit. E - 525.
9. Cemented straight spindle - 525.
10. Centralizer in sizes at least 8 to 14 mm - 525.
11. Revision plug, cementless, modular - 35.
12. Hip joint with antibiotic - 35.
13. Titanium screw for fixing a cementless casing or anti-rotation cage - 263.
14. Audit anti-shock basket, acetabular - 35.
15. Bipolar cup to the head ø 28 mm - 123.
16. Oscillating saw blades dedicated for hip replacement - disposable 1,300, reusable 650.
PLIF - cage of interbody interbody spondylodeosis - 25.
1. Cervical disc - disc base - 80.
2. Frame - 80.
3. Neck screw (fixing) - 160.
1. Rotary spigot made of PEEK - 10.
2. Rotary pin made of titanium - 60.
1. Titanium neck plates - 6.
2. Titanium screws for fixing neck plates (set: plate + 4 screws) - 24.
Prosthesis of cervical vertebral bodies in various sizes - 10.
1. Thoracic and lumbar shaft prosthesis - 6 sets
2. Lateral stabilization of the thoracic and lumbar spine - 6 sets
Endo-phalangeal and interphalangeal joint endoprostheses - 60.
1. Femoral nail - 20.
2. Demolition femoral nail - 15.
3. Anatomic femoral nail - 15.
4. trochanteric nail -15.
5. Tibia nail - 15.
6. Shoulder nail - 15.
7. Nail to the ulna - 10.
8. Locking screws - 400.
9. Pins - 30.
10. Cervical screws - 15.
1. Radial palm plate - 20.
2. Simple reconstruction plate; thicknesses from 1.8 to 2.6 mm - 50.
3. Plate profiled to the epiphyseal humerus - 8.
4. Plate profiled to the epiphyseal distal humerus - 8.
5. Plate profiled to the epiphyseal dorsolateral humerus - 6.
6. Plate profiled to the base of the proximal left / right tibia - 8.
7. Plate profiled to the base of the distal medial tibia - 6.
8. Distal anterolateral tibial plate - 6.
9. Femoral condylar plate - 6.
10. Wedge osteotomy plate (+) - 6.
11. Cortical screws - 200.
12. Locked cortical screws - 200.
13. Small plate with different number of holes - 10.
14. Small self-pressure plate with different number of holes - 10.
Self-tapping Shanza self-tapping screws:
1. fi 2.0 mm (2.5 mm) L = 150-160 / 180/200 mm - 20.
2. fi 3.0 mm (3.5 mm) L = 150-160 / 180/200 mm - 20.
3. fi 4.0 mm L = 150-160 / 180/200 mm - 20.
4. fi 4.5 mm L = 150-160 / 180/200 mm - 10.
5. fi 5.0 mm (5.5 mm) L = 150-160 / 180/200 mm - 10.
6. fi 6.0 mm L = 150-160 / 180/200 mm - 10.
Cannulated cannulated self-tapping screws:
1. fi 4.5 mm L = 20 mm - 20.
2. fi 4.5 mm L = 25 mm - 20.
3. fi 4.5 mm L = 30 mm - 20.
4. fi 4.5 mm L = 35 mm - 20.
5. fi 4.5 mm L = 40 mm - 20.
6. fi 4.5 mm L = 45 mm - 20.
7. fi 4.5 mm L = 50 mm - 20.
Self-tapping cube screws:
1. fi 4.5 mm L = 25 mm - 30.
2. fi 4.5 mm L = 30 mm - 30.
3. fi 4.5 mm L = 35 mm - 30.
4. fi 4.5 mm L = 40 mm - 30.
5. fi 4.5 mm L = 45 mm - 30.
6. fi 4.5 mm L = 50 mm - 30.
7. fi 4.5 mm L = 55 mm - 30.
8. fi 4.5 mm L = 60 mm - 30.
9. fi 4.5 mm L = 65 mm - 20.
10. fi 4.5 mm L = 70 mm - 20.
System for dynamic stabilization of lower tibiofibular fibrosis:
1. System for dynamic stabilization of lower tibiofibular fibrosis. Instrumentation for system implantation is required in the system - 30.
1. Primary, modular, cemented knee joint prosthesis - 700.
2. Tibial extensions in at least three lengths - 105.
3. Knee joint endoprosthesis with antiallergic coating - 70.
4. Tibial extensions with antiallergic coating in min. 3 lengths - 35.
5. Revision knee replacement - 35.
6. Revision knee joint prosthesis -18.
7. Blades for an oscillating saw dedicated to knee arthroplasty, single use - 700, reusable - 350.
1. Bone cement with antibiotic 1 x 40 g - 500.
2. Bone cement with a double antibiotic 1 x 40 g - 400.
3. System for mixing and feeding bone cement in sterile conditions during surgery - 500.
Endoprosthesis of the first metatarsal joint total cemented or uncemented, in increasing sizes - 15.
Hip Dynamic Stabilizer (DHS):
1. Dynamic iliac plate and dynamic plate with limited contact - 20.
2. Neck screw - 20.
Condylar dynamic stabilizer (DCS):
1. Condylar dynamic plate, may be with limited contact - 20.
2. Neck screw - 20.
Titanium bone clamps in various sizes - 40.
1. Liquid bone substitute with feeder. Material capacity 5 ml - 5.
2. Liquid bone substitute material with feeder. Material capacity 10 ml - 10.
3. Liquid bone substitute material with feeder. Material capacity 18 ml - 10.
4. Feeding needles of varying length and thickness - 15.
1. Hook plates - 6.
2. Straight plates - 6.
3. Church tape or ropes with lengths in the range 190 to 270 mm - 40.
4. Church's handle - 6.
1. Arch to the foot 160 x 160 - 4.
2. Bow to foot 140 x 160 - 4.
3. Composite carbon ring 110 mm - 4.
4. Composite carbon ring 130 mm - 4.
5. Composite carbon ring 150 mm - 4.
6. Carbon composite ring 160 mm - 2.
7. Mini hip arch - 2.
8. Mini plus hip arch - 2.
9. Female bracket with threaded hole stainless steel - 20.
10. Male threaded connector stainless steel, L = 25 mm, number of holes: 2 - 50.
11. Male threaded connector, stainless steel, L = 25 mm, number of holes: 3 - 20.
12. Male threaded connector, stainless steel, L = 25 mm, number of holes: 4 - 10.
13. Male threaded connector, stainless steel, L = 25 mm, number of holes: 5 - 10.
14. Male connector with threaded end stainless steel L = 15 mm, number of holes: 2 - 50.
15. Male connector with threaded end stainless steel L = 15 mm, number of holes: 3 - 20.
16. Male connector with threaded end stainless steel L = 15 mm, number of holes: 4 - 10.
17. Male connector with threaded end stainless steel L = 15 mm, number of holes: 5 - 10.
18. Bracket 90
19. Bracket 90
20. Male bracket with extended thread, stainless steel one hole, L = 20-25 - 50.
21. Threaded rod M6 stainless steel L = 60 - 20.
22. M6 threaded rod stainless steel L = 80 - 20.
23. Threaded rod M6 stainless steel L = 100 - 30.
24. M6 threaded rod stainless steel L = 120 - 40.
25. Threaded rod M6 stainless steel L = 150 - 40.
26. Threaded rod M6 stainless steel L = 200 - 30.
27. Threaded rod M6 stainless steel L = 250 - 30.
28. Threaded rod M6 stainless steel L = 300 - 30.
29. Nut M6 stainless steel, standard - 600.
30. Screw M6 stainless steel L = 20 mm - 30.
31. M6 screw stainless steel L = 30 mm - 30.
32. M6 screw for wire fixation with undercut stainless steel L = 20 mm - 150.
33. M6 screw for wire fixation with undercut stainless steel L = 30 mm - 50.
34. Shanza nail screw with stainless steel L = 4 mm - 30.
35. Shanza nail screw with stainless steel L = 5 mm - 30.
36. Screw with Shanza nail hole stainless steel L = 6 mm - 30.
37. Washer with cut stainless steel - 200.
1. Threaded Kirchnery fi 2 mm -12.
2. Threaded Kirchnery fi 1.6 mm - 24.
3. Screwdrivers 6 mm of various lengths - 40.
1. Angle plate 130
2. Angular plate 95
3. Angular pressure plate 95
4. Angle plate 90
5. Self-locking angle plate 90
6. Cortical screws fi 4.5 and fi 6.5 of various lengths (from 40 to 160 mm) - 40.
TLIF - cages for interbody interbody spondylodeosis - 25.
1. Insertable cervical cages - 25.
1. Press-fit titanium non-cemented revision pan with ceramic or polyethylene insert with hole plates for bolting to the acetabulum and hip bone with screws in at least three increasing sizes, for the left and right side - 10.
2. Ceramic or highly cross-linked PE eaves or non-eaves insert for the inspection bushes from items 1 - 10.
3. Metal spacer allowing an additional hood for the ceramic insert - 5.
4. Bone screws 6.5 mm, in sizes 20-60 mm - 60.
All inside meniscus sewing system - 40.
Kirschner wire
1. fi 1.2 mm L = 310 mm - 200.
2. fi 1.4 mm L = 310 mm - 200.
3. fi 1.6 mm L = 310 mm - 200.
4. fi 1.8 mm L = 310 mm - 200.
5. fi 2.0 mm L = 310 mm - 200.
6. fi 3.0 mm L = 310 mm - 50.
Rush nails
1. fi 2.4 mm L = 150 ÷ 200 mm - 10.
2. fi 3.0 mm or 3.2 mm L = 160 ÷ 240 mm - 10.
3. fi 4.0 mm L = 160 ÷ 240 mm - 10.
1. Post-resection endoprosthesis of the proximal femur - 5.
2. Post-resection endoprosthesis of the distal femur - 5.
3. Post-resection endoprosthesis of the proximal tibia - 5.
4. Resectional endoprosthesis of the proximal humerus - 5.
5. Post-resection hip joint socket - 5.
1. Post-resection endoprosthesis of the proximal femur - 5.
2. Post-resection endoprosthesis of the distal femur - 5.
3. Post-resection endoprosthesis of the proximal tibia - 5.
1. Handle with a pneumatic cylinder controlled in two stages by one trigger button - 1.
2. Working pressure regulator for air or nitrogen - 1.
3. Working element of the de-energizer with a jaw width of 2 mm deflected 130
4. Working element of the de-energizer with a jaw width of 3 mm deflected 130
5. Working element of the de-energizer with a jaw width of 4 mm deflected 130
6. Working element of the de-energizer with a jaw width of 5 mm deflected 130
7. Working element of the de-energizer with a jaw width of 6 mm deflected 130
8. Working element of the de-energizer with a jaw width of 3 mm deflected 130
9. Working element of the de-energizer with a jaw width of 4 mm deflected 130
10. Steel basket with handles for storage and sterilization of handle and reducer - 1.
11. Steel basket with handles for storage and sterilization of working elements - 1.
12. Maintenance-free container with cover with PTFE filter - 1.
13. Single-use pressure hoses for connecting the actuator handle to the working pressure reducer - 1.
14. Pressure hose with diffuser for connecting the system to the compressed air source, input type AGA - 1.
Bio-absorbable interference screw - 150.
Polyethylene snap-on bearing for heads fi 22.2 mm, fi 28 mm and fi 32 mm - 50.
1. Total endoprosthesis, anatomical (right, left), cemented or uncemented 20.
2. Total revision total elbow replacement - 6.
1. Traumatic prosthesis - traumatic stem - 8.
2. Anatomical endoprosthesis cemented with a PE-10 socket.
3. Inverted endoprosthesis with a PE - 80 cup.
4. Full cementless endoprosthesis - 10.
5. Shoulder revision prosthesis - 14.
1. Stabilization of the hem of the acetabulum - 70.
2. Repair of the rotator cuff - 40.
3. Knotless system for brachycardial stabilization - 10.
4. Soft anchor - 50.
Spine stabilization with minimally invasive percutaneous instruments:
1. Transpedicular screws with diameters from 5 to 7 mm - 100.
2. Transpedicular, tulip, cannulated and perforated screws - 25.
3. Spinal rods from 40 mm to 200 mm in length - 50.
4. Transverse connector in sizes from 30-100 mm - 25.
5. Transverse hook for fastener - 50.
6. Laminar and pedicure hooks set - 9.
Thoracolumbosacral spine stabilization:
1. Transpedicular screws with diameters from 4 to 8 mm - 1000.
2. Transpedicular screws, tulip, with a double guided thread in the cortex - 40.
3. Spinal rods with a diameter of 5.5 mm and 6.0 mm and a length from 40 mm to 600 mm - 200.
4. Transverse connector in sizes from 30-100 mm - 100.
5. Cross hook for connector - 200.
6. Laminar and pedicure hooks set - 40.