Geothermal Project 19057 Schwerin-Lankow - delivery of deep pump and periphery as well as installation service

A geothermal resource with two holes (conveying and injection drilling) has been developed at the Schwerin site. Drilling was drilled and tested in 2017 and 2020. The pumped thermal brine is intended to serve as a source for a heat pump system that heats up the return of a district heating network.

Thermal water with a maximum quantity of 150 m3/h (head 1.8 MPa), a temperature of approximately 55 degrees dC and a mineralization of approx. 150 g/l (NaCL type) is conveyed from the conveyor hole after surface with a submersible centrifugal pump. The installation depth of the pump is 250 m. There is a 10 3/4" protective piping with internal coating (Vetco TK-216) in the installation area.

In addition to supplying the pump set, the offer also includes an underground probe, the pump cable, a frequency converter and the step up transformer. In addition, the pump installation service and commissioning service are queried.