In the name and for the account of the City of Hanover, the Hanover Region Waste Management Association, Karl-Wiechert-Allee 60c, 30625 Hannover, intends to procure 4 truck chassis with three-way tipper and loading crane, divided into 2 lots.

EURO VI E engine; Fuel Type: Diesel; Power: min. 100 kW - 130 kW; Ab. Total weight min. 7,000 kg, max. 7,500 kg; Off-road tires with coarse tread; wheelbase min. 4,100 mm, max. 4,300 mm; maximum vehicle width (without exterior mirrors) 2,100 mm; drive on axles 1 and 2; differential lock on axles 1 and 2; selectable longitudinal differential lock; Switching of the power take-off from the cab; indicator light on the instrument panel; Brake system with automatic load-dependent control; automatic anti-stall device; electronic stability program; Emergency Brake Assist; Lane Monitoring Assistant; Turning assistant according to the recommendation of the Federal Ministry of Transport and Digital Infrastructure, published in the Verkehrsblatt issue 19-2018, No. 149; Reversing camera with LCD screen (colour monitor) in the cab (automatically switches on when the reversing step is engaged). The installation location of the monitor will be determined by aha at the time of the first acceptance (taking into account the technical feasibility and the legal requirements).

Steering assistance; Cab painted in municipal orange, based on RAL 2011; electric windows for driver's and passenger's doors; Central locking; airbag for driver and front passenger; min. height-adjustable steering wheel; heated rear-view mirrors, elt. adjustable; hydraulically sprung driver's seat, with 3-point safety belt, heatable, height, tilt and longitudinal adjustment; hydraulically sprung front passenger seat, with 3-point seat belts, heated, height, tilt and longitudinally adjustable; 4-seater bench seat in row 2 with 3-point seat belts on the outer seats; Heating and ventilation system with air outlets on the windscreen, driver's and passenger's footwell and side windows; multi-stage blower for hot and fresh air supply; min. manual air conditioning of the cab; Radio system with Bluetooth hands-free system; toll device; grab handles in the area of the A-pillars for the driver and front passenger; possibility of passage from row 1 to row 2; roof shelf above the windscreen; 12 V socket in the cab; Rear wall windows. Reversing warning device, in "noisy version", self-adjusting 77-97 decibels. Towbar ball head with min. towing capacity 3,300 kg; Vehicle without EC recording equipment (vehicles are not used commercially); Warning marking red / white reflective according to DIN 30710; Contour marking for cab according to ECE 104 R; LED light bar in flat design (orange glow) mounted on the vehicle roof, switchable via switches in the dashboard; It must be ensured that the chassis is suitable for the construction of a three-way tipper with a loading crane. The Contractor shall deliver the chassis to the body manufacturer described in Lot 2 free of charge.

What is required is a customer service workshop or a support point with a mobile service that ensures that the truck chassis can be repaired within 24 hours. It must be stated whether a spare parts delivery service is available on a daily basis and, if so, how often it is used. can be used on a daily basis.

Zus. Warranty periods beyond the statutory warranty period are desired and indicated.

Dimensions of the IL platform: approx. 3,100 mm x 2,100 mm x 400 mm; steel side walls, hot-dip galvanised, exterior painted in RAL 2011 municipal orange, foldable; Side wall closures in corrosion-free design. Leaf grid attachments of approx. 600 mm height that can be attached to the side walls must be provided. The leaf lattice attachments should cover about half of the platform length and run at an angle towards the length of the platform. The bulkhead must be designed accordingly. Platform floor made of sheet steel, hot-dip galvanized; 8 lashing rings, 4 of which are embedded in the ground on each long side, according to VBG 12 §22; Platform frame in hot-dip galvanized design; Tipper cylinder 5-stage; Tipper operation via separate cable remote control in the driver's cab including corresponding holder; 2 toolboxes underneath the platform, size adapted to the available installation space (min. 500 mm wide, min. 400 mm high, min. 400 mm deep), lockable lid, material in corrosion-free design; lockable aluminium crate in platform width, installation location front wall, height approx. 600 mm, depth approx. 750 mm. The box is with 2 pieces; to provide cover flaps, which must allow rainwater to drain off (inclination to the rear approx. 2°); 1 piece of pull-out ladder front right below the loading floor; installation site between platform body and cab; Crane placement with the grab mounted must be placed on the loading area of the tipper. The basic length of the crane must be designed accordingly. Swivel range approx. 180 degrees; hydraulic design; Lifting load at maximum deflection approx. 700 kg; Arm system in telescopic design to approx. 7,000 mm; crane protection incl. operating hours meter, drive motor start/stop, optical-acoustic overload indicator, optical height warning device, emergency/stop device; Crane control via radio remote control

2 control stations to the left and right of the vehicle for all operating functions; if technically feasible on the chassis side, the support legs of the loading crane should point downwards in the driving position. If necessary, an existing side collision protection must be modified accordingly. The legal total width of 2550 mm must be observed! Support leg boom in hydraulic design; Support leg plates oscillating; Support leg boom with red/white marking and warning light; 2 pieces of shims for the crane support legs incl. Holder 1 piece per side; Support leg monitoring with central position monitoring; Arm system monitoring for the crane in the transport position; level-monitored central lubrication system for the crane; 2-tray grippers: nominal capacity approx. 60 to 80 l; width approx. 300 mm; compact gear unit without cylinder with removable gripper teeth (5 pieces); Load hook with swivel and rotator; Bodywork report from an official inspection organisation in order to be able to register the entire vehicle; Warning marking red / white reflective according to DIN 30710 front, rear and side; Contour marking for body according to ECE 104 R; 2pcs LED work lights, mounting place on bulkhead protection grille; 2 pieces of LED work lights, mounting place at the back in the area of the lamp holders; LED work lights for crane system; Vehicle - ambient lighting, switchable from the driver's cab; Mounting and wiring side marker lights; side underride protection left and right with hot-dip galvanized steel brackets on the body; Heavy-duty hydraulic pump; Hand washing device with at least 15l of water in the area of the operator's station of the loading crane. The hand washing system must be electrically heated via the vehicle's electrical system. Function of the heater only when the engine is running.

Required is a customer service workshop or a base with mobile service that ensures a repair start of the body within 24 hours. It shall be indicated whether a spare parts delivery service is available on a daily basis and how often, if any, it is available. can be used daily.