Several existing buildings are currently located on the site of the so-called Kirchenwirt in the municipality of Wörthsee. The building of the former Kirchenwirt is to be preserved and renovated as a local building. The remaining existing buildings will be demolished and replaced by 2 new buildings with several residential units. In addition, an event hall and small commercial units are being built on the site.

Tile and slab work must be carried out as part of the construction project.

- approx. 275 m2 of porcelain stoneware flooring, on surfaces of different sizes, 97x97 mm, d= 6 mm, R10B.

- approx. 8 m2 tiled floor on a slope for small areas

- approx. 40 m2 porcelain stoneware floor covering for surfaces of different sizes, 200x200 mm, D= 6-15 mm, R12.

- approx. 285 m2 porcelain stoneware wall covering, 97x97mm, d=approx. 6 mm

- approx. 570 m porcelain stoneware base, 97x297 mm, d=approx. 6 mm.

- approx. 20 m hollow base made of porcelain stoneware, 20 x 10 cm.

- approx. 20 m2 stone-effect porcelain stoneware floor covering, 80x80 cm, D= 6 mm, R10A.

- Remove approx. 40 m2 of natural stone step and risers.

- approx. 32 stone-effect porcelain stoneware steps, partly polygonal from approx. 01x1.1 m to 0.27x1.6 m, d=12 mm

- approx. 22 pcs. Stone-effect porcelain stoneware riser, up to 0.19 x 1.6 m, thickness = approx. 12 mm.

- approx. 55 m stone-effect porcelain stoneware skirting board, h = up to approx. 15 cm, thickness = approx. 10.5 mm.

- approx. 4 m2 outdoor stair landing made of stone-effect porcelain stoneware, 80x80 cm, D = 6 mm, textured surface, R11B.

- approx. 25 m prefabricated angular steps, L= up to 1.85 m, consisting of stone-effect porcelain stoneware step and riser, D = 20 mm, structured surface, R11B.

- approx. 11 m stone-effect porcelain stoneware skirting board, h = up to 15 cm, D = up to 20 mm, textured surface.

- approx. 100 m material cutting rail, in various lengths.

- approx. 720 m silicone joint closure indoors

- approx. 15 m corner protection angle made of stainless steel, 40x40 mm

- approx. 16 m rubber profile (T-shaped) non-slip, w = 8 mm