The subject matter of this contract is the supply and installation of scientific equipment to INL, listed below and detailed in Schedule V attached to these Standard Specifications (from now on referred to as ‘Specifications’). The equipment listed in Schedule V are the lots that the tender comprises. Tenderers may bid for one or more lots. The subject matter of the contract, in all cases, does not include so-called refurbished scientific instruments and equipment.
The eleven lots comprising the tender are as follows;
1. Multiplexing platform
2. Biosafety cabinet (Class II)
3. CO2 incubator with O2 control
4. CO2 incubator
5. Water bath
6. Vacusafe
7. Cryogenic storage vessel with racks
8. Centrifuge (microtubes, microplates, conical tubes 15 and 50 mL)
9. Microscope + Fluorescence
10. Freezer (-20C)
11. Osmometer (freezing point)
These purchases are funded by the project SbDToolBox – Nanotechnology-based tools and tests for Safe-by-Design nanomaterials with code NORTE-01-0145-FEDER
Technical Specifications
• Multiplexing: up to 80 analytes per sample
• Dynamic range (typical): ≥ 4.5 logs
• Read time: 96-well plate in ≤20 min (up to 144,000 tests/hour)
• Daily start-up/shutdown: ≤ 15 min
Delivery Schedule and Training
Target delivery time: 10 weeks
The proposal should include the delivery schedule and the proposed training support for operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
The expected required spare parts and maintenance plan with all the costs and timeframe should be detailed for an estimation of a 12 months period.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga, Portugal.
Technical Specifications
Capacity 513L, temperature −18...−25ºC.
Delivery Schedule and Training
Target deliver time: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga and contacts.
Technical Specifications
Range 0 - 2000 mOsmol/kg, sample volume up to 200 μL
Delivery Schedule and Training
Target deliver time: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga and contacts.
TeTechnical Specifications
Class II microbiological safety cabinet, internal dimensions 1800×548×666 mm, electrically operated front window.
Delivery Schedule and Training
Target delivery date: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga, Portugal.
Technical Specifications
• Capacity 170L with O2 control;
• Range (Oxygen Concentration): 0.2 to 20 vol% O2;
• Temperature Range: Ambient +4°C to 60°C;
• Including Silicone access port, 30 mm diameter.
Delivery Schedule and Training
Target delivery date: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga, Portugal.
TTechnical Specifications
• Capacity 170L;
• Temperature fluctuation (°C): ± 0,1 at 37 °C;
• Temperature Range: Ambient +5°C to 60°C;
• Including Silicone access port, 30 mm diameter.
Delivery Schedule and Training
Target delivery date: June 2021
The proposal should include the delivery schedule and the proposed training support.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga.
Technical Specifications
• Capacity 12 L;
• Ambient +5...99 °C;
• temperature stability ± 0,2 °C.
Delivery Schedule and Training
Target deliver time: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga and contacts.
Technical Specifications
Vacusafe Aspiration system with integrated pump, PP collection bottle 4 L.
Delivery Schedule and Training
Target deliver time: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga and contacts.
TTechnical Specifications
Capacity 72L;
Daily Evaporation 0.6 L/day;
Storage capacity 2000 (100 vials/box).
Delivery Schedule and Training
Target deliver time: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga and contacts.
Technical Specifications
Centrifuge including rotors or adapters for microtubes, microplates and conical tubes 15 and 50 mL, Temperature: –10 to +40°C, RCF veloc max 4149 g.
Delivery Schedule and Training
Target deliver time: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga and contacts.
Technical Specifications
Inverted Microscope + Fluorescence: objectives (10 Ph1, 20x Ph1 and FLUOR 40x), LED, standard filters (blue, green, red), digital camera.
Delivery Schedule and Training
Target deliver time: June 2021
The proposal should include the delivery schedule and the proposed training support for process, operation and maintenance.
Maintenance Contract and Warranty
The proposal should indicate typical costs of the standard maintenance contracts for this tool, as well as indicate the warranty period and items covered under warranty.
Technical Support
The proposal should indicate the geographical location of the team providing support for the tool to be installed in Braga and contacts.