The subject of the contract is the collection, transport and further management of waste with the code 19 12 12 in an amount of up to 7,000 Mg in a bundled form divided into three parts of the contract:

1) part of order No. 1: up to 1 500 Mg;

2) part of order No. 2: up to 2,500 Mg;

3) part of order No. 3: up to 3,000 Mg;

And in quantities of up to 15,000 Mg in bulk, broken down into three lots:

1) part of order No. 4: up to 4,000 Mg;

2) part of order No. 5: up to 5,000 Mg;

3) part of order No. 6: up to 6,000 Mg.

The order was divided into six lots, i.e. the Employer envisages submitting partial bids. Contractors may submit partial bids for one or all parts of the contract. The contracting authority does not specify the maximum number of lots for which partial offers may be submitted by one contractor.

The estimated amount of waste to be managed will be up to 1 500 Mg. Zamaw. reserves the right to reduce the amount of waste expected to be utilized, which does not result in withdrawal from the contract or change of its terms. The actual amount of waste will result from the current needs of the Employer.

The waste management method offered must comply with applicable law and recovery processes specified in Annex 1 to the Act of 14 December 2012 on waste (i.e., Journal of Laws of 2018, item 992, as amended). ; hereinafter referred to as the "Waste Act"). Alternative fuel production components (RDF) will be prepared by the Employer for collection in the form of a pressed bale, tied with steel wire. Dimensions of pressed bales are: 80 x 110 x 90-120. The average weight of one bale is about 400 - 700 kg.

The collection of components for the production of alternative fuel (RDF) will take place from the premises of Zakład Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin, from Monday to Friday, from 6.00 to 19.00. The transport quantities will be each time specified in the unit order sent by e-mail (or fax) to Comp. two days before receipt. There is a possibility of another date of raw material receipt, after prior agreement with the Employer.

The component is loaded by the Employer. The weighing of the components received by the Contractor will take place on the legalized balance of the Employer, located at the Employer's plant and will be confirmed by a receipt. This document will be the sole basis for determining the quantity of components received for the production of alternative fuel.

The Employer will issue waste transfer cards for components for the production of alternative fuel (RDF), received in a given month, based on the balance of weighings of received components, originating from a computer program supporting the weighing system at the Employer's Plant. Waste transfer cards will be issued in 3 copies, one for the Employer and two for the Contractor.

The Contractor is obliged after each month of the service to provide the Employer with a written statement on the manner of their management, indicating the recovery process specified in Annex 1 to the Act of 14 December 2012 on waste.

The contractor must indicate in the contract the installation in which the waste collected will undergo a recovery process.

In each half-year of performing the service, the Contractor shall provide the Employer with the result of the examination of received components for the production of RDF code 19 12 12, including: morphology (structure of the composition) of waste collected from the Employer, humidity, chlorine content in the abovementioned waste, heat of combustion and calorific value, sulfur, carbon and hydrogen content. The costs of performing the tests shall be borne by the Contractor.

The Awarding Entity allows a site visit to be carried out at the Plant in Witaszycze. Zamaw. informs that the possibility of making a local visit exists in the period from the day of announcement of the tender to the day preceding the day of opening the offers, after prior telephone arrangement with the Order.

The site visit will cover the waste collection area code 19 12 12 and its surroundings in order for the Contractors to assess, on their own responsibility, cost and risk, all data that may be necessary to prepare the offer and sign the resulting contract.

A local visit will take place on the premises of Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin. The person responsible for organizing the local vision is Ms. Justyna Liberek, phone no. 62 747 24 56, ext. 114. During the local visit, no queries or clarifications regarding the content of the ToR will be accepted.

Made. bears full responsibility for the consequences of lack of or erroneous diagnosis. real conditions.

The estimated amount of waste to be managed will be up to 2,500 Mg. The Purchaser reserves the right to reduce the amount of waste expected to be managed, which does not result in withdrawal from the contract or change of its terms. The actual amount of waste will result from the current needs of the Employer.

The waste management method offered must comply with applicable law and recovery processes specified in Annex 1 to the Act of 14 December 2012 on waste (i.e., Journal of Laws of 2018, item 992, as amended). ; hereinafter referred to as the "Waste Act"). Alternative fuel production components (RDF) will be prepared by the Employer for collection in the form of a pressed bale, tied with steel wire. Dimensions of pressed bales are: 80 x 110 x 90-120. The average weight of one bale is about 400 - 700 kg.

The collection of components for the production of alternative fuel (RDF) will take place from the premises of Zakład Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin, from Monday to Friday, from 6.00 to 19.00. The transport quantities will be each time specified in the unit order sent by e-mail (or fax) to Comp. two days before receipt. There is a possibility of another date of raw material receipt, after prior agreement with the Employer.

The component is loaded by the Employer. The weighing of the components received by the Contractor will take place on the legalized balance of the Employer, located at the Employer's plant and will be confirmed by a receipt. This document will be the sole basis for determining the quantity of components received for the production of alternative fuel.

The Employer will issue waste transfer cards for components for the production of alternative fuel (RDF), received in a given month, based on the balance of weighings of received components, originating from a computer program supporting the weighing system at the Employer's Plant. Waste transfer cards will be issued in 3 copies, one for the Employer and two for the Contractor.

The Contractor is obliged after each month of the service to provide the Employer with a written statement on the manner of their management, indicating the recovery process specified in Annex 1 to the Act of 14 December 2012 on waste.

The contractor must indicate in the contract the installation in which the waste collected will undergo a recovery process.

In each half-year of performing the service, the Contractor shall provide the Employer with the result of the examination of received components for the production of RDF code 19 12 12, including: morphology (structure of the composition) of waste collected from the Employer, humidity, chlorine content in the abovementioned waste, heat of combustion and calorific value, sulfur, carbon and hydrogen content. The costs of performing the tests shall be borne by the Contractor.

The Awarding Entity allows a site visit to be carried out at the Plant in Witaszycze. Zamaw. informs that the possibility of making a local visit exists in the period from the day of announcement of the tender to the day preceding the day of opening the offers, after prior telephone arrangement with the Order.

The site visit will cover the waste collection area code 19 12 12 and its surroundings in order for the Contractors to assess, on their own responsibility, cost and risk, all data that may be necessary to prepare the offer and sign the resulting contract.

A local visit will take place on the premises of Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin. The person responsible for organizing the local vision is Ms. Justyna Liberek, phone no. 62 747 24 56, ext. 114. During the local visit, no queries or clarifications regarding the content of the ToR will be accepted.

Made. bears full responsibility for the consequences of lack of or erroneous diagnosis. real conditions.

The estimated amount of waste to be managed will be up to 3,000 Mg. The Purchaser reserves the right to reduce the amount of waste expected to be managed, which does not result in withdrawal from the contract or change of its terms. The actual amount of waste will result from the current needs of the Employer.

The waste management method offered must comply with applicable law and recovery processes specified in Annex 1 to the Act of 14 December 2012 on waste (i.e., Journal of Laws of 2018, item 992, as amended). ; hereinafter referred to as the "Waste Act"). Alternative fuel production components (RDF) will be prepared by the Employer for collection in the form of a pressed bale, tied with steel wire. Dimensions of pressed bales are: 80 x 110 x 90-120. The average weight of one bale is about 400 - 700 kg.

The collection of components for the production of alternative fuel (RDF) will take place from the premises of Zakład Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin, from Monday to Friday, from 6.00 to 19.00. The transport quantities will be each time specified in the unit order sent by e-mail (or fax) to Comp. two days before receipt. There is a possibility of another date of raw material receipt, after prior agreement with the Employer.

The component is loaded by the Employer. The weighing of the components received by the Contractor will take place on the legalized balance of the Employer, located at the Employer's plant and will be confirmed by a receipt. This document will be the sole basis for determining the quantity of components received for the production of alternative fuel.

The Employer will issue waste transfer cards for components for the production of alternative fuel (RDF), received in a given month, based on the balance of weighings of received components, originating from a computer program supporting the weighing system at the Employer's Plant. Waste transfer cards will be issued in 3 copies, one for the Employer and two for the Contractor.

The Contractor is obliged after each month of the service to provide the Employer with a written statement on the manner of their management, indicating the recovery process specified in Annex 1 to the Act of 14 December 2012 on waste.

The contractor must indicate in the contract the installation in which the waste collected will undergo a recovery process.

In each half-year of performing the service, the Contractor shall provide the Employer with the result of the examination of received components for the production of RDF code 19 12 12, including: morphology (structure of the composition) of waste collected from the Employer, humidity, chlorine content in the abovementioned waste, heat of combustion and calorific value, sulfur, carbon and hydrogen content. The costs of performing the tests shall be borne by the Contractor.

The Awarding Entity allows a site visit to be carried out at the Plant in Witaszycze. Zamaw. informs that the possibility of making a local visit exists in the period from the day of announcement of the tender to the day preceding the day of opening the offers, after prior telephone arrangement with the Order.

The site visit will cover the waste collection area code 19 12 12 and its surroundings in order for the Contractors to assess, on their own responsibility, cost and risk, all data that may be necessary to prepare the offer and sign the resulting contract.

A local visit will take place on the premises of Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin. The person responsible for organizing the local vision is Ms. Justyna Liberek, phone no. 62 747 24 56, ext. 114. During the local visit, no queries or clarifications regarding the content of the ToR will be accepted.

Made. bears full responsibility for the consequences of lack of or erroneous diagnosis. real conditions.

The estimated amount of waste to be managed will be up to 4,000 Mg. The Purchaser reserves the right to reduce the amount of waste expected to be managed, which does not result in withdrawal from the contract or change of its terms. The actual amount of waste will result from the current needs of the Employer.

The waste management method offered must comply with applicable law and recovery processes specified in Annex 1 to the Act of 14 December 2012 on waste (i.e., Journal of Laws of 2018, item 992, as amended). ; hereinafter referred to as the "Waste Act"). Components for the production of alternative fuel (RDF) will be prepared by the Purchaser for collection in bulk - without prior balancing.

The collection of components for the production of alternative fuel (RDF) will take place from the premises of Zakład Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin, from Monday to Friday, from 6.00 to 19.00. The transport quantities will be each time specified in the unit order sent by e-mail (or fax) to the Contractor two days before receipt. There is a possibility of another date of raw material receipt, after prior agreement with the Employer.

The component is loaded by the Employer. The weighing of the components received by the Contractor will take place on the legalized balance of the Employer, located at the Employer's plant and will be confirmed by a receipt. This document will be the sole basis for determining the quantity of components received for the production of alternative fuel.

The Employer will issue waste transfer cards for components for the production of alternative fuel (RDF), received in a given month, based on the balance of weighings of received components, originating from a computer program supporting the weighing system at the Employer's Plant. Waste transfer cards will be issued in 3 copies, one for the Employer and two for the Contractor.

The Contractor is obliged after each month of the service to provide the Employer with a written statement on the manner of their management, indicating the recovery process specified in Annex 1 to the Act of 14 December 2012 on waste.

The contractor must indicate in the contract the installation in which the waste collected will undergo a recovery process.

In each half-year of the service, the Contractor shall provide the Employer with the result of the examination of received components for the production of RDF with the code 19 12 12,

Including: morphology (structure of the composition) of waste collected from the Employer, humidity, chlorine content in the abovementioned waste, heat of combustion and calorific value, sulfur, carbon and hydrogen content. The costs of performing the tests shall be borne by the Contractor.

The Awarding Entity allows a site visit to be carried out at the Plant in Witaszycze. The Employer informs that the possibility of making a local visit exists in the period from the day of announcing the tender to the day preceding the day of opening the offers, after prior telephone arrangement with the Employer.

The site visit will cover the waste collection area code 19 12 12 and its surroundings in order for the Contractors to assess, on their own responsibility, cost and risk, all data that may be necessary to prepare the offer and sign the resulting contract.

A local visit will take place on the premises of Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin. The person responsible for organizing the local vision is Ms. Justyna Liberek, phone no. 62 747 24 56, ext. 114. During the local visit, no queries or clarifications regarding the content of the Specification of the Essential Terms of the Contract will be accepted. Such inquiries should be directed to the Employer in accordance with the provisions of the Act.

The contractor bears full responsibility for the consequences of the lack of or wrong recognition of the terms of the contract.

The estimated amount of waste to be managed will be up to 5,000 Mg. The Purchaser reserves the right to reduce the amount of waste expected to be managed, which does not result in withdrawal from the contract or change of its terms. The actual amount of waste will result from the current needs of the Employer.

The waste management method offered must comply with applicable law and recovery processes specified in Annex 1 to the Act of 14 December 2012 on waste (i.e., Journal of Laws of 2018, item 992, as amended). ; hereinafter referred to as the "Waste Act"). Components for the production of alternative fuel (RDF) will be prepared by the Purchaser for collection in bulk - without prior balancing.

The collection of components for the production of alternative fuel (RDF) will take place from the premises of Zakład Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin, from Monday to Friday, from 6.00 to 19.00. The transport quantities will be each time specified in the unit order sent by e-mail (or fax) to the Contractor two days before receipt. There is a possibility of another date of raw material receipt, after prior agreement with the Employer.

The component is loaded by the Employer. The weighing of the components received by the Contractor will take place on the legalized balance of the Employer, located at the Employer's plant and will be confirmed by a receipt. This document will be the sole basis for determining the quantity of components received for the production of alternative fuel.

The Employer will issue waste transfer cards for components for the production of alternative fuel (RDF), received in a given month, based on the balance of weighings of received components, originating from a computer program supporting the weighing system at the Employer's Plant. Waste transfer cards will be issued in 3 copies, one for the Employer and two for the Contractor.

The Contractor is obliged after each month of the service to provide the Employer with a written statement on the manner of their management, indicating the recovery process specified in Annex 1 to the Act of 14 December 2012 on waste.

The contractor must indicate in the contract the installation in which the waste collected will undergo a recovery process.

In each half-year of the service, the Contractor shall provide the Employer with the result of the examination of received components for the production of RDF with the code 19 12 12,

Including: morphology (structure of the composition) of waste collected from the Employer, humidity, chlorine content in the abovementioned waste, heat of combustion and calorific value, sulfur, carbon and hydrogen content. The costs of performing the tests shall be borne by the Contractor.

The Awarding Entity allows a site visit to be carried out at the Plant in Witaszycze. The Employer informs that the possibility of making a local visit exists in the period from the day of announcing the tender to the day preceding the day of opening the offers, after prior telephone arrangement with the Employer.

The site visit will cover the waste collection area code 19 12 12 and its surroundings in order for the Contractors to assess, on their own responsibility, cost and risk, all data that may be necessary to prepare the offer and sign the resulting contract.

A local visit will take place on the premises of Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin. The person responsible for organizing the local vision is Ms. Justyna Liberek, phone no. 62 747 24 56, ext. 114. During the local visit, no queries or clarifications regarding the content of the Specification of the Essential Terms of the Contract will be accepted. Such inquiries should be directed to the Employer in accordance with the provisions of the Act.

The contractor bears full responsibility for the consequences of the lack of or wrong recognition of the terms of the contract.

The estimated amount of waste to be managed will be up to 6,000 Mg. The Purchaser reserves the right to reduce the amount of waste expected to be managed, which does not result in withdrawal from the contract or change of its terms. The actual amount of waste will result from the current needs of the Employer.

The waste management method offered must comply with applicable law and recovery processes specified in Annex 1 to the Act of 14 December 2012 on waste (i.e., Journal of Laws of 2018, item 992, as amended). ; hereinafter referred to as the "Waste Act"). Components for the production of alternative fuel (RDF) will be prepared by the Purchaser for collection in bulk - without prior balancing.

The collection of components for the production of alternative fuel (RDF) will take place from the premises of Zakład Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin, from Monday to Friday, from 6.00 to 19.00. The transport quantities will be each time specified in the unit order sent by e-mail (or fax) to the Contractor two days before receipt. There is a possibility of another date of raw material receipt, after prior agreement with the Employer.

The component is loaded by the Employer. The weighing of the components received by the Contractor will take place on the legalized balance of the Employer, located at the Employer's plant and will be confirmed by a receipt. This document will be the sole basis for determining the quantity of components received for the production of alternative fuel.

The Employer will issue waste transfer cards for components for the production of alternative fuel (RDF), received in a given month, based on the balance of weighings of received components, originating from a computer program supporting the weighing system at the Employer's Plant. Waste transfer cards will be issued in 3 copies, one for the Employer and two for the Contractor.

The Contractor is obliged after each month of the service to provide the Employer with a written statement on the manner of their management, indicating the recovery process specified in Annex 1 to the Act of 14 December 2012 on waste.

The contractor must indicate in the contract the installation in which the waste collected will undergo a recovery process.

In each half-year of the service, the Contractor shall provide the Employer with the result of the examination of received components for the production of RDF with the code 19 12 12,

Including: morphology (structure of the composition) of waste collected from the Employer, humidity, chlorine content in the abovementioned waste, heat of combustion and calorific value, sulfur, carbon and hydrogen content. The costs of performing the tests shall be borne by the Contractor.

The Awarding Entity allows a site visit to be carried out at the Plant in Witaszycze. The Employer informs that the possibility of making a local visit exists in the period from the day of announcing the tender to the day preceding the day of opening the offers, after prior telephone arrangement with the Employer.

The site visit will cover the waste collection area code 19 12 12 and its surroundings in order for the Contractors to assess, on their own responsibility, cost and risk, all data that may be necessary to prepare the offer and sign the resulting contract.

A local visit will take place on the premises of Zakład Gospodarki Odpadami Sp. z o. o. in Jarocin, Witaszyczki 1A, 63-200 Jarocin. The person responsible for organizing the local vision is Ms. Justyna Liberek, phone no. 62 747 24 56, ext. 114. During the local visit, no queries or clarifications regarding the content of the Specification of the Essential Terms of the Contract will be accepted. Such inquiries should be directed to the Employer in accordance with the provisions of the Act.

The contractor bears full responsibility for the consequences of the lack of or wrong recognition of the terms of the contract.