The subject of the order is the delivery with commissioning of: orthopedic implants, titanium plates with accessories, bone cement with accessories, titanium clamps, nails for stabilizing calcaneus fractures, fixing screws, self-tapping and bone spongy, end caps, Steinmann grotto screws, hip endoprostheses, knee, primary knee joint endoprosthesis, cemented and a cemented and cementless hip joint endoprosthesis.

1. Cement-free stem-300pcs.

2. Cement-free mandrel – Type 2 made of titanium alloy – 50 pcs.

3. Cemented mandrel straight, flangeless, requiring a centralizer, in min. 6-u sizes-20pcs.

4. Cement-free shell which consists of an outer shell covered with titanium spraying with a porosity of 50%, spherical shape of the shell (slightly flattened) -300 pcs.

5. Screw-in (threaded) pan-40pcs.

6. Polyethylene insert made of highly cross-linked polyethylene with antioxidant (Vit E) (polyethylene insert shape: standard, asymmetrical or with eaves)-100pcs.

7. Polyethylene cartridge: modular polyethylene insert made of highly cross-linked polyethylene with antioxidant (Vit E)-50pcs.

8. Modular polyethylene insert standard or with hood-50pcs.

9. Cemented shell - made of polyethylene with increased abrasion resistance, equipped with a double steel ring visible in the X-ray-20 pcs photo.

10. Metal head – for conus 12/14, diameter fi.22.2 in 2 neck lengths and 28.32mm and 36mm in 5 neck lengths-20pcs.

11. Ceramic head – made of ceramics reinforced with zirconium nitride, for cone 12/14, outer diameter 28 and 32 mm in 3 neck lengths -300 pcs.

12. Ceramic head – made of reinforced ceramics with zirconium oxide, for cone 12/14, outer diameter 36mm in 4 neck lengths -50 pcs.,

13.Centralizers for cemented mandrels-40pcs.

14.Gelatin-glycerin cork (dissolved) – for blocking the myeloid cavity of the femur, with diameters in the range of 8-18 mm (inclusive), in a minimum of 6 sizes-20 pcs.

15. Bipolar head - with an external diameter of 39 to 55mm every 1mm equipped with an anti-sprain ring -20pcs.

16. Sponge screws diameter 6.5 mm for fixing the shell-60pcs.

17. Disposable blades width from 10mm to 65mm and length from 40mm to 100mm-150pcs.

1. Cemented femur component. Anatomical femur part (left and right) made of chromocobalt at least in 7 sizes for each side-120 pcs.

2. Cemented tibial component. Universal tibia part, made of chromocobalt, modular (not permanently bound to the polyethylene insert) at least in 9 sizes-120 pcs.

3. Polyethylene insert realizing 3-step, factory rear tilt, available in thicknesses of 10mm, 12mm, 14mm, 16mm, at least in 5 sizes for each thickness. Sterilized with beta rays. Fastened on the principle of snap-on.-125pcs.

4. Tibia element cemented together with a polyethylene insert forming one whole (monoblock) made entirely of polyethylene. The articulation surface of the tibia element must be compatible with the articulation surface of the femoral component-20pcs.

5. Centralizer allowing the component to be set correctly-20pcs.

6. Obstructive screw for tibia component-5pcs.

7. Tibia extension-5pcs.

8. Augmentation pad with thickness of 4mm and 8mm-5pcs.

9. Femoral component hypoallergenic cemented Anatomical femur part (left and right) made of chromocobalt, coated with zirconium nitrate, at least in 7 sizes for each side-3pcs.

10. Tibial component hypoallergenic cemented Tibial part universal, made of chromocobalt, modular (not permanently bound to the polyethylene insert) at least in 9 sizes-3 pcs.

11.Obstructive screw for hypoallergenic tibial component-3pcs.

12.Hypoallergenic tibial extension-3pcs.

13. Hypoallergenic augmentation pad-3pcs.

14. Saw blade for oscillating or reciprocating saw compatible with borrowed equipment-105pcs.

1. Cement-free mandrel made of titanium alloy entirely coated with hydroxyapatite in 7 sizes. Cone 10/12. A mandrel with an oval cross-section in the epiphyseal part, tapering distal with a highly polished thin neck. A mandrel with vertical grooves in the proximal part improving primary stabilization and osseointegration. Threaded hole for removing the stem - 30pcs.

2. Dual Mobility with anatomical shape, z, "Press-Fit" type without screw holes. Porous surface coated with hydroxyapatite. Part "Press-Fit" around the perimeter of the acetabulum with inverted fastening grooves. The inner part is highly polished with a smooth edging ø 48-64 mm (stroke every 2 mm). Also available in cement version in sizes ø 48-60 mm (stroke 2 mm increments) - 30 pcs.

3.Insert for double movable shell - spherical insert with an internal diameter of ø 28 mm and an external diameter adapted to the wolfness of the shell. Made of polyethylene with maximum abrasion resistance -30pcs.

4.Head - metal with ø 28 mm in 4 sizes (S, M, L, XL) - 30 pcs.

1. Titanium plate bent, and straight with limited contact with the bone, blocking and compression to the femur shaft and periprosthesis fractures with holes in the variable-angle plate-5 pcs.

2. Anatomical titanium plate, with limited contact with the bone, blocking-compression to the distal end of the femur for periprosthesis fractures, with holes in the variable-angle plate. Plate for the treatment of periprosthetic fractures under variable angle lock screws with diameters of 4 and 5 mm-5 pcs.

3. Anatomical titanium plate, with limited contact with the bone, blocking and compression to the proximal end of the femur, with holes in the variable-angle plate. Plate for the treatment of periprosthetic fractures-20pcs.

4. Periprosthesis cortical screw with a diameter of 5.0mm with lengths from 10 to 20mm (with a jump every 2 mm) with the possibility of locking with a cap with a diameter of 8mm at an angle deviated from the axis of the hole of 15 degrees in any direction, made of titanium alloy-20pcs.

5. Cannular spongy screw with a diameter of 4.5mm, with the possibility of locking with a cap with a diameter of 8mm at an angle deviated from the axis of the hole 15 degrees in any direction, made of titanium alloy-5pcs.

6. Sponge screw 5.0mm thread 32mm, with the possibility of locking with a cap with a diameter of 8mm at an angle deviated from the axis of the hole 15 degrees in any direction, made of titanium alloy-20pcs.

7. 5.0mm diameter cortical screw with the possibility of locking with a cap with a diameter of 8mm at an angle deviated from the axis of the hole 15 degrees in any direction, made of titanium alloy-90pcs.

8. 4.0mm diameter cortical screw with the possibility of locking with a cap with a diameter of 8mm at an angle deviated from the axis of the hole of 15 degrees in any direction, made of titanium alloy-40pcs.

9. 4.0mm diameter cortical screw (rare thread) with the possibility of locking with a cap with a diameter of 8mm at an angle deviated from the axis of the hole 15 degrees in any direction, made of titanium alloy-5pcs.

10. 8mm diameter cap for locking screws-100pcs.

11. Distance moving the plate away from the bone by 1.2 or 3mm-10pcs.

12. Hybrid plate - overlay for trochanter plate-2pcs.

13. Locking screws 3.5mm titanium10pcs..

14. 3.5mm titanium cortical screws-5pcs.

15. Orthopedic cable system. The cable is equipped with a twisted terminal that allows you to unlock the clamped loop again and verify the voltage and change the setting of the cable-10pcs.

16. Pin connecting the cable to the plate-10pcs.

17. Anatomical titanium plate, with limited contact with the bone, blocking and compression for fractures of the distal end of the femur. In the head of the plate holes for cortical screws with a diameter of 5.0 mm and spongy screws with a diameter of 5.0 mm; screws in the head at different angles with the possibility of an adjustment of 15 degrees in each direction (the possibility of obtaining angular stability of each screw locked with a cap after obtaining compression of splinters with a cortical or spongy screw), and a distal hole for cortical screws with a diameter of 3.5 mm. The possibility of additional removal of the plate from the bone by means of walks of different lengths marked with colors and the use of plugs for unused holes. Lockable plugs screwed in by means of a torque screwdriver with a force value specified in Nm appropriate for a given system, reducing the tightening force - 2 pcs.

1. Bone cement with antibiotic. Bone cement of medium viscosity with copolymer methylacrylate MA, addition of gentamicin, sterilized with ethylene oxide. The content of the active substance should not exceed 1.5% of the powdered substance. It is required that both components are dyed - 150 pcs.

2. Bone cement with two active antibiotics. High viscosity bone cement with the addition of gentamicin and clindamycin, sterilized with ethylene oxide. It is required that both components are dyed - 20 pcs.,

3. Vacuum mixers for cement. Single set containing 1 mixer / syringe equipped with an air filter, 2 nozzles of 2 lengths (long and short) for easy application of cement. Vacuum indicator in the system. Vacuum filter equipped with a carbon filter - 170pcs.

Titanium clamps for bonding periprosthesis fractures, width min. 8mm. A clamp is placed on the tape at the factory. The set and tapes must be delivered within 48 hours of notification by the Ordering Party. A specialized set of tools for dragging, tensioning and crimping the band-20pcs is required.

1. Nail to stabilize calcaneus fractures with the possibility of multidirectional blocking. Nail 65mm long and 8mm in diameter, left, right. The nail has 7 holes for locking screws. Two holes for fixing screws allowing you to connect the calcaneus jumping support. With a sight for X-rays. The set includes: locking screws with a flat head with a diameter of 3.5mm and a length of 22-70mm placed on a tripod, caps 0, 5, 10, 15, 20 mm. Nail in implant steel version -20 pcs.

2. Fastening screws, self-tapping, reinforced with a flat head Ø 3.5mm, length from 20 mm - 50mm with a stroke of 2 mm increments. From 55mm – 70mm with a stroke of 5 mm. Material steel-140pcs.

3. Bone spongy screws of diameter 4.0mm with partial thread, length from 20-50 mm with 2 mm increment and from 50-60mm with 5 mm increments.Material steel-50pcs.

4. End cap from 0mm to 20mm with 5mm increments. Material steel-20pcs.

5. Steinmann grotto screws with a diameter of 6mm, lengths of 180 and 200 mm-10pcs.

1. PS/CR femur element cemented pcs. 50

2. Polyethylene insert PS/CR/CS pcs. 50

3. Tibial tray CoCr cemented pcs. 50

4. Bone cement with tobramycin 10 x 40g pcs. 5

5. Disposable blade for oscillating saw compatible with the borrowed drive pcs. 50