supply of all the necessary equipment to students using the school transport services of the CaclIt consists of five (5) lots:Lot no. 1: Supply of safety armbands for secondary school pupils - middle and high schools Lot 2: Supply of safety vests for primary school pupils - nursery and primaryLot no. 3: Supply of dome towers no. 4: Supply of rigid badge holders no. 5: Supply of RFID charts, the material must be delivered to the CACL headquarters located at 4, Esplanade de la Cité d'affaires - Balata district - cS 36029 _ 97 357 Matoury Cedex

safety cuffs must:- be fluorescent yellow and made of an elastic material;- allow high visibility and safety by means of reflective strips;- have a suitable hook-and-loop fastener- bear a CE marking and a reference to one of the two applicable standards: EN 471 or EN 1150;- bear a label mentioning the conditions of care;- be accompanied by an information leaflet written in French, indicating, in particular, the instructions for use, cleaning, maintenance and storage, the expiry date or period. They must be flocked with the CACL charter on 135 mm:The annual quantity is estimated at 8500 units

safety vests must:- be fluorescent yellow;- allow high visibility and safety by means of reflective strips;- bear a CE marking as well as a reference to one of the two applicable standards: EN 471 or EN 1150;- bear a label mentioning the conditions of care;- be accompanied by an information leaflet written in French, indicating, in particular, the instructions for use, cleaning, maintenance and storage, expiry date or period. They must be flocked with the CACL charter:- the front on 80mm*80mm:The annual quantity is estimated at 4,000 units

The cords must:- be made of ribbed polyester;- have a carabiner;- have the following dimensions: length 860 mm, width 10 mm;- be of "Cool gray 7 c" colour (approaching);They must be flocked all along the neck circumference with the following CACL chart on 50mm (long)*7mm (wide) in colour 320 c (approaching) and a space of 10 mm: The annual quantity is estimated at 13,500 units

Badge holders must:- be made of transparent and robust PVC- be rigid vertical (Idp64v);- have the dimensions 86*54 mm;- have a capacity for a badge of 0.76 mm thick.The annual quantity is estimated at 13,500 units

The cards charted according to the PJ model must:- be RFID;- be made of Mifare laminated PVC;- have a memory quantity of 1kB;- have the dimensions 86x54mm;- have a thickness of 0.76mm;. - be customized according to the template provided in the attachmentThe annual quantity is estimated at 14,000 units