Structural design.

The subject of the planned commissioning is the services of structural design according to Part 4 Section 1 HOAI; Basic services for phases 2 to 6 of Annex 14 to Section 51 (5), Section 52 (2) of the HOAI, and engineering controls (Special services in service phases 8).

As part of the construction project "Renovation Wing A and B" are now as a continuation of the previous construction measures CfAED, renovation of Schönfeldhörsaals and the renovation of the adjacent C-wing, a large part of the rooms from the basement (U2) to the 3rd Floor, and the roof The outer and inner walls of the existing building are made of plastered masonry, the ceilings are mostly made of reinforced concrete ribbed ceilings with brickfilled facings (Ackermann ceilings) or in certain areas ceilings may have been constructed Although the 2nd floor has already been substantially repaired in the course of the construction site clearing for the previous measures, however, almost every room has to be intervened once again lay, the heating and the windows. See also attached overviews in which areas to be maintained or already renovated are marked. The elevator at the stairway 5 for the delivery of the floors U2 - 03 has to be modernized. In the run-up to the refurbishment, however, a comprehensive examination of the building substance is to take place. The use of adjacent areas by the Institute of Precision Engineering and Electronics Design, as well as the faculty workshop must be guaranteed throughout the construction project. There is no structural expansion or modification of the outer shell of the building. The main usable area (NFa) of the planned construction area is about 4,100 m 2 , the traffic area (VF) is about 1 800 m 2 ,

Estimated cost of construction (averaged over comparable experience and RBC) is approximately EUR 11 780 000 gross. (Consists of approx. EUR 0.30 million gross from the KG 200, approx. EUR 5.58 million gross from the KG 300 and approx. EUR 5.86 million gross from the KG 400).