Transfer container — 1000ml

Containers, quadruple, conventional, with filter

In line, for whole blood, top-to-top

Transfer container — 1000ml

1. It has a CE declaration of conformity and notification to the Register of Medical Devices.

2. Sterile container for storing blood components.

3. Total capacity – 1000ml.

4. Container made of transparent plastic that can withstand freezing at temperatures from -600C to -860C.

5. Has two ports for liquid infusion.

6. Equipped with a drain departing from the upper part of the container (length min. 20 cm +/- 2 cm to branch) then branched into two drains (each with a length of min. 20 cm) ending with a recipient needle (made of plastic).

1. Containers for blood collection, production of low-molecular red blood cell concentrate with enrichment fluid and low-molecular fresh-frozen plasma.

2. CPD container (63ml) for collecting 450ml of blood, an empty container for filtered whole blood, an empty container with a capacity of min 400 ml, and a container containing 105 ml +/- 5 ml of SAGM or ADSOL liquid.

3. Containers should not contain strontium and show changes in preservative.

4. Containers should have a drain for blood collection terminated with a sharp needle with an additional cap to prevent puncture after collection. The design of the needle should guarantee the prevention of excision of the skin, subcutaneous tissue and vein.

5. All drains should be flexible, easy to roll, allowing for durable welds and operation of the clamps of the fumigators.

6. The drain running from the donor must be attached to the top of the CPD container.

7. The length of the drainage from the container to the base of the needle should be min. 90 cm.

8. Labels must be made of plastic, resistant to mechanical damage, allowing you to stick your own label.

9. Labels shall contain information on the type and quantity of preservative and the batch number in the form of a bar code.

10. Containers should be packed in individual packages made of transparent film, individually, ensuring tightness and sterility.

11. Containers shall be provided with a first blood sampling container with a port for sampling in a vacuum system. The drawing drain and the drain running to the sample container should be equipped with clamps.

12. The nozzles that clear the flow between the containers should be easily broken.

13. ADSOL or SAGM enrichment solution capable of storing the resulting CCC in the standard temperature range of 2 to 6 degrees C for 42 days.

14. Containers must be released for marketing within the Polish.