SUPPLY OF MEDICAL DEVICES FOR ENDOVASCULAR SURGERY AND DIAGNOSTIC IMAGING

STANDARD INTRODUCERS: from 4 to 14 Fr, length from 11 cm and 23 cm, straight tip and preformed tips. Critical Tip: the tip must be radiopaque

ANGIOGRAPHIC KIT CONTAINING: Angiography needle. 2 Luer Lock syringes of 10. 1 Luer Lock syringe of 20. 2 normal syringes of 10. 1 regular syringe of 20. 2 breathable and highly waterproof XL gowns; gowns must be of high quality, with absorbent outer layer and waterproof inner layer, complying with flammability legislation; One of the 2 gowns must be in a sterile single bag with 2 towels. Canvas for mother table, cloth with pre-packaged femoral and radial accesses and with transparent side band, large adhesive cloth, 2 small adhesive sheets, 20 small gauzes, 10 large gauzes, 2 absorbent paper tissues, 1 large disposable tub 25x35 cm (3000ml), 1 bowl of 8 cm (250 ml), 3 bowls of 10 cm (400 ml). Ice cream to sterilize the field. Transparent detector cover with elastic edges (50x50 cm), knob covers with elastic edges, transparent bulkhead covers, ultrasound probe cover including elastic Rubber band type and 2 sachets of sterile gel (the latter material for the ultrasound probe must be present in the Kit, but wrapped separately, so that it can be taken aside if it is not used). 1 blade scalpel 11 with anti-cut closure system.

Automatic guillotine needle for soft tissue biopsy. Light and ergonomic handpiece equipped with two firing buttons (side and rear) with color code for visual recognition of the caliber. 22mm feed depth. One-handed loadable. Sizes from 14G to 20G, from 10cm to 25cm

Wireless device for breast assisted vacuum biopsy under ultrasound guidance. Lightweight and ergonomic driver with front light for percutaneous insertion site illumination. Equipped with SIMS technology (single insertion and multiple sampling) and needles with 10G, 14G and 12G caliber. Illuminated sample collection basket equipped with a magnifying glass to observe the quality of the sample during the procedure. Optional possibility of firing / advancing the needle of 2 cm. Equipped with coaxial cannula for release of the marker at the end of the procedure. Equipped with sensor for fabric density recognition. Equipped with accessory coaxial cannulas to halve the withdrawal window.

Device for breast assisted vacuum biopsy under stereotactic guidance/tomosynthesis, ultrasound and magnetic resonance imaging. Equipped with touch screen monitor with integrated computer. Possibility of using 7G, 10G and 12G needles. Same handpiece and needle codes for U/S and stereotactic procedures to facilitate procurement and storage of disposable material. Possibility to vary the width of the withdrawal window on each needle. Possibility of programming and automatic rotation of the needle to speed up the biopsy procedure for both the clinician and the patient. Sharp tip of the needles for effective penetration and possibility of injecting undiluted anesthetic inside the biopsy cavity.

Self-expandable metal biliary stents, uncovered, in nitinol monofilament with atraumatic ends, crossed and hooked mesh structure

Self-expandable biliary stents in nitinol covered with crossed mesh structure and hooked HOOK & CROSS removable with distal exrmity equipped with lazzo

Self-expanding stents for biliary bifurcation, in monofilament nitinol with atraumatic and flared ends to reduce the risk of migration, crossed mesh structure and hooked HOOK & CROSS, equipped with softer "cross mesh" to facilitate the passage of one stent inside the other

Percutaneous polyurethane drainage catheter with hydrophilic coating, for Seldinger technique and direct puncture, tapered and shaped tip to prevent the accordion effect during insertion. Length 25-35 cm.-caliber 10-12 Fr

Inner-external gall-drainage catheter, with retention wire, pigtail tip, extruded polyurethane with hydrophilic coating, with radiopaque marker on the last inner-external biliary drainage catheter, with retention wire, pigtail tip, Caliber 10-12 Fr, various lengths

Needles for biopsy suction, type Menghini modified, caliber 14,16,18 G-variable length between 10 and 20 cm., equipped with snap system for use by single operator

Chiba needle caliber 21 and 22 G-length 15.20 and 25 cm.

SINGLE ANGIOGRAPHIC NEEDLE

Single electrode kit exposure 2 and 3 cm

Single electrode kit exposure 2 and 3 cm

Triple electrode kit exposure 3 and 4 cm

Disposable thermistor tube

THERMOSPERA TECHNOLOGY DISPOSABLE ANTENNAS WITH THERMOSPHERA TECHNOLOGY They must be composed of a single body, also dispensing section, in fiberglass, with internal coaxial reinforcement in steel; ceramic access trocars; diameter 13G, radiant portion 2.8 cm, length 15-20-30 cm; the circulation of the saline, through tubes already attached to the antenna, takes place for the entire length of the body, up to the ceramic portion The Thermosphere technology ensures the simultaneous control of the electromagnetic field, thermal field and wavelength. Quantity 20

Antenna from 13 to 18 G,;

Length from 15 to 30 cm

Thermistor tube

Connector for measuring blood pressure

Mandrill compatible with rail from 0.014 to 0.035

Y-CONNECTOR, WITH HAEMOSTATIC VALVE. SPRING AND SCREW CLOSURE.

Y-CONNECTOR, WITH HAEMOSTATIC VALVE. SPRING AND SCREW CLOSURE.

MANOMETRIC SYRINGE FOR INSUFFLATION UP TO 26 ATMOSPHERES, WITH HIGH PRECISION TAP AND 3-WAY SYSTEM

CATHETERS FOR PANORAMIC AND SELECTIVE ANGIOGRAPHY, ATRAUMATIC TIP AND RADIOPAQUE. 4 AND 5 FR. WITH ARMATURE CONSISTING OF 16 STAINLESS STEEL WIRES. LENGTH FROM 65 TO 125 CM, COMPATIBLE WITH 0.035 AND 0.038 GUIDES. INJECTION PRESSURE UP TO 1200 PSI MAX. IN ALL AVAILABLE CONFIGURATIONS.

CATHETERS FOR PANORAMIC AND SELECTIVE ANGIOGRAPHY, ATRAUMATIC TIP AND RADIOPAQUE. 4 AND 5 FR. LENGTH FROM 65 TO 125 CM, COMPATIBLE WITH 0.035 AND 0.038 GUIDES. WITH REINFORCEMENT CONSISTING OF STAINLESS STEEL WIRES. INJECTION PRESSURE UP TO 1200 PSI MAX. IN ALL AVAILABLE CONFIGURATIONS.

Centimetrate angiographic catheter for measuring vascular lesions from 65 to 110 cm. Made of polyurethane with reinforcement consisting of 16 intertwined stainless steel wires. Pigtail tip, 5F. Gold radiopaque markers for injury length assessments. Available in versions with 2, 10 or 20 markers

Large caliber introducers, in HDPE/LDPE, with triple valve for hemostasis and hydrophilic coating. Sheath reinforced with stainless steel spirals. from 12 to 26 Fr. Length 28 cm. Critical Tip: the tip must be radiopaque.

OTW support catheters for peripheral artery occlusions compatible with .014", .018" and .035" guide, lengths from 65 to 150 cm, 4 and 5 Fr introducer compatibility, with hydrophilic and low profile coating. With radiopaque markers

Support catheter for recanalization in the treatment of peripheral artery occlusions, low profile, reinforced with hydrophilic coating of the distal portion of at least 40 cm, same profile from the proximal portion to the distal portion (NON-CONICAL), tapered tip and radiopaque. Available in straight tip, angled ANG, angled ANG2 and DAV configurations. Presence of distal radiopaque markers and external depths

Available in diameters of 2.3 Fr, 2.6 Fr and 4 Fr, compatible with 0.014", 0.018" and 0.035" rails; lengths from 65 to 150 cm.

Reinforced guide catheters (armor with braided wires in 316L steel), in Arnitel on the outside and PTFE on the inside, 6 – 7 and 8 Fr, 55 and 90 cm. Curves HS-RDC-RES-C1-MP-CROSSOVER-BATES-LIMA-40°

Guide catheter for PTA equipped with wide and not tapered lumen, NYLON body in multisegment technology, double intertwining reinforcement of steel wires with round and flat section (HYBRID armor). FROM 6 TO 9 FR, LENGTH AT LEAST UP TO 90 CM. IN ALL POSSIBLE CONFIGURATIONS. FOR THE TREATMENT OF VISCERAL BRANCHES

Hydrophilic microcatheter with variable durometry 0.021" and 0.027" (3.0-2.5 , 3.0-2.8 Fr) in Nitinol laser cut, hypotube with microcracks and platinum tip. Possibility to have it with preloaded guide in two versions: 0.014" and 0.016" in steel with ICE coating.

Coaxial microcatheter, with built-in guidance. External coating in M Coat polymer; catheter wall in 3 layers (PTFE interior, middle layer in radiopaque tungsten spirals, polyester outer layer). Diameters from 2.0 Fr to 2.8 Fr. Length from 110 to 150 cm. Straight point and at 90°. 0.7 mm marker in Platinum/Iridium

Single microcatheter for superselective investigations, characterized by braiding with tungsten and hydrophilic filaments in the distal portion. Made of Pebax with 6 different hardness. External distal caliber 2.0F and inner lumen diameter 0.021". Lengths 105 - 130 - 155 – 175 cm. Right tip and bern configurations. Radiopaque marker at the tip.

Compatible with 0.018" spirals, embolic microspheres up to 700 microns, PVA particles up to 500 microns, DMSO and yttrium90 products.

Microcatheter adjustable at 180°, usable without guide wire, length 125 cm, of which 80 cm hydrophilic, with I.D. 0.021 "(therefore compatible with microspheres max 500μ and with coils max 0.018"), with Pebax stem with stainless steel reinforcement with braided links and tungsten directional wires, and with two markers bands that greatly improve radiopacity. Suggested for the challenging vascular ostio approach, or used to simplify the procedure and optimize its time.

Intravascular system for handling and recovering foreign bodies, consisting of three interconnected nitinol laces, an exclusive feature that avoids the prolapse of one of the lobes, ensuring that the device navigates and works as a single unit. The choice of material gives flexibility to the device, resistance to kneeling and optimal torsion control. The presence of platinum markers at the level of the laces allows optimal visualization under fluoroscopic guidance. System designed to expand, rotate and recover different types of foreign bodies in pots of different sizes.

The recovery catheter has a 15° angled tip to facilitate navigation even in the most tortuous anatomies. In addition, the radiopaque marker at the tip allows you to accurately identify the position of the catheter in fluoroscopy.

The kit is completed with the presence of an exclusive peel-away device, which allows you to easily load the loop inside the recovery catheter.

Working dimensions of the laces: from 2mm to 45mm.

Suction catheter with rapid exchange system designed for effective and fast thrombus aspiration. The structure of the catheter body, reinforced with a steel weave, is specially designed to avoid kneeling of the same even after repeated passages in the vessel. In addition, it allows an excellent torsion control, for a better progression inside the vessel and the presence of the distal hydrophilic coating allows excellent navigability. The presence of three depth markers allows you to monitor the progress of the device under fluoroscopy.

Complete kit of accessories to facilitate and speed up the suction procedure, carrying it out in complete safety.

Diameters:4 F ; 5.2F.

Suction area: 0.81 MM2 ; 1.01mm2.

Introducers of large caliber, from 12 to 22 Fr, straight tip. Length 11-12 cm. Critical Tip: the tip must be radiopaque.

Catheter for pharmacological infusion in peripheral vascularization. It includes on the distal tip, a valve mechanism that allows infusion with or without guidance, which allows a "weep" or "pulse-spray" infusion. The maximum achievable pressure is 350psi. in polyurethane/nylon coextruded with polyurethane (PU) valve. In two sizes: from 4 and 5 Fr. Length from 40 to 135 cm. Infusion zone lengths 5,10,20cm, delimited by two radiopaque markers

Snare for the recovery of foreign bodies and / or for the repositioning of interventional devices consisting of a nitrinol loop covered with a gold-plated tungsten filament to facilitate visibility. Once unsheathed, the loop is arranged at 90° with respect to the carrier system. Available in two versions:

-Microsnare: diameters from 2 mm to 7mm (lengths 175 or 200cm) from 3 Fr;

-Snare: diameters from 5 to 35mm, length 120cm from 4 or 6Fr.

Hydrophilic angiographic guide in Nitinol. One-piece core in superelastic metal alloy with no welds to ensure flexibility and shape memory. Polyurethane coating with tungsten salts to ensure atraumaticity and radiopacity. The rail must be coated with the hydrophilic polymer M which ensures maneuverability and absence of friction. Tapered and rounded tip for less vessel traumatism. Diameter from 0.018 to 0.038''. Lengths d 50 to 300 cm. Various types of tip. In standard and Stiff version.

Linear elastic elastic nickel hydrophilic guides with hydrophilic polymer and tungsten coating with adequate torsion and elasticity control characteristics, flexible and tapered tip, maximum radioopacity. Diameters from 0.018" - 0.025" - 0.035" - 0.038". Straight and angled tip also long (J 3 mm), standard and stiff version. Lengths 80 – 150 – 180 – 260 cm.

Peripheral guides in steel with hydrophilic cover type ICE, preformable; 0.014": lengths 182 and 300 cm, tapered tip 8 and 12 mm, 3 and 6 g

CTO guide in 0.014" and 0.018" steel with proximal PTFE coating and distal hydrophilic coating, lengths 195 and 300 cm, radiopaque tip 2 and 2.5 cm, stiffness 12 - 18 - 25 and 30g

Amplatz support guide in ultra-rigid and extra-rigid version. In steel with external PTFE coating, available with floppy tip of various lengths, straight or angled, with a radius of curvature of 3 mm. Diameter 0.035'', length up to 300 cm.

Extra rigid 0.035" Teflon guide for aortic endoprostheses, with seamless steel inner core, preformable J and C tips, lengths from 185 cm to 300 cm.

Standard PTFE Teflon support guide, for peripheral vascular procedures. In various tip and length configurations. Diameter 0.035''.

0.014'' steel guide, hydrophilic with polymer tip. Standard, moderate and extra-support version. Lengths from 182 to 300 cm.

Vascular introducers armed for access in carotid arteries, distal portion of 7 cm divided into 4 zones with increasing flexibility from the proximal part to the distal part, Tuohy-Borst valve with lateral washing route, radiopaque distal marker, internal lumen coating in PTFE, hydrophilic outer coating of the distal portion of the introducer and dilator, tapered distal tip in straight configuration, compatible with 0.038" rail, diameters available from 5 and 6 Fr, length 90 cm

0.014'' rail, steel, hydrophilic with polymer tip for complex injuries. Right and J. Lengths from 182 to 300 cm.

Super rigid hybrid guide in Nickel Titanium and steel to ensure crossing of the lesion and high support to the devices with a single guide. Characterized by a distal part with hydrophilic coating and a core in supelastic metal alloy in Nickel-Titans. The distal part (last 25 cm) must be equipped with 2 coatings (polyurethane and tungsten salts + synthetic hydrophilic copolymer M). The proximal part must have a steel heart and spiral PTFE coating. Gold spiraling at the tip. Diameter 0.014'. Length up to 300 cm

Guide 0.014'' with straight and preformable distal tip, and proximal end connected to the extension of the DOC guide wire. Provided with proximal markers. Spiral distal end with polymer cover up to 5 mm of the tip. Tip tapering from 0.012'' to 0.09''. Internal steel core with a single filament that extends from the proximal to the distal section. The distal section of the guide wire is provided with a combination of standard and parabolic tapering. Core-to-Tip tip design, available with different tip weights (from 4.8 to 13.3 grams). The tip is covered with 3 cm of spiral. Turbocoat hydrophilic coating and polyurethane coating. Proximal section of PTFE-coated guide wire with a second hydrophobic coating. Available for coronary and peripheral use.

0.035'' - 0.018'' steel guide with differentiated support. Tapered tip in the last 17 cm at .025'' with ultra-soft ends. Coating with lubricant in the distal operating part. Length from 145 to 300 cm.

POBA balloons, compatible with 0.035 rail, OTW configuration, various lengths (up to 200-300 mm), various diameters. On 5 Fr maximum. Shaft of at least 130 cm. Radiopaque marking of the ends of the flask. Shaft up to at least 130 cm.

Low profile angioplasty balloon (0.020" entry profile) with controlled compliance, OTW and monorail available, compatible with 0.014" and 0.018" rail, diameters from 2 mm to 10 mm and lengths from 20 mm to 220 mm (4 Fr introducer compatibility up to 8 x 40 mm size). Rod length up to 150 cm.

Low-profile over the wire balloon catheter in semi-compliant nylon compatible with 0.014" guide, equipped with two radiopaque markers at the ends of the ball.

Distal 40 cm hydrophilic coating including the outer surface of the flask; Low profile catheter entry tip. Compatible with 4 Fr introducer

Breaking pressure 16 atm.

Shaft length: 120 and 150 cm

Balloon diameters: 2 - 2,5 – 3 - 3,5 - 4 mm

Balloon lengths: 2 cm to 22 cm

catheter for PTA, over the wire with compatible guide wire from 0.014 to controlled compliance, RBP up to 16 atm, diameters from 1.25 to 4 mm and lengths from at least 10 mm to 200mm, conical and atraumatic tip profile not exceeding 0.017. High permanence and resistance hydrophilic coating (hydrax). Available in at least 2 shaft not less in length from 100 cm up to 150 cm. 4F compatible

Low-profile angioplasty balloon (entry profile 0.43mm – 0.017") semi-compliant, available OTW and monorail, compatible with 0.014" rail, diameters from 1.5 mm to 4 mm and lengths from 40 mm to 220 mm. Rod length from 90 cm to 150 cm

PTA balloon catheter compatible with 0.014" rail, semi-compliant (or minimally compliant), hydrophobic nylon-12 with coaxial catheter, OTW (Over-the wire). The balloon must have two markers (four for the 210mm lengths) in platinum-Iridium.

Diameters from 1.5mm to 4mm, lengths from 20mm to 210mm. Maximum breaking pressure at 14atm. In hydrophobic Pebax, in lengths 90cm (unique on the 0.014 balloon market, OTW), and 150cm. The catheter tip must be tapered 360°, with an input profile of 0.017" (smallest on the market). All sizes must be compatible with 4Fr introducer.

Reinforced valve introducer and carrier catheter for transluminal angioplasty procedures. Guide introducer compatible with guides up to 0.038'', available in various lengths and sizes with diameters from 5 to 8 Fr. Internal PTFE lining with spiral steel reinforcement along its entire length. External coating in nylon with hydrophilic polymer M in the distal part. Hemostatic valve in double version (single-wall cross design or Tuohy-Borst). Tapered and soft distal section for less traumatism and high trackability. length from 45 to 90 cm.

Balloon catheter with atheromas: monorail version from 2 to 4 mm and length 1.5cm; OTW version from 5 to 8 mm and length 20mm

Balloon catheter for PTA over-the-wire for percutaneous dilation consisting of a praided body in nitinol and an atraumatic tapered tip. Compatible with 0.014" and 0.018" guide wires. Balloon diameters from 2.5 to 6 mm, length 40,80,120 mm; The shaft is armed with hydrophilic coating and ranges from 120 to 150 cm. Compatible with 5F and 6F introducer. The distal end of the catheter is equipped with a semi-conforming balloon that expands to known diameters at specific pressures. The balloon is compressed into a nitinol containment structure (SC) that ensures rapid deflation and uniform rewinding. The SC is removed from the vessel along with the balloon catheter during the deflation phase.

Catheters for atherectomy consoles with frontal and differential cutting blades; expandable blade technology for athererectomy and thrombectomy for both the upper part of the knee and the part below the knee; compatible with 0.014" rails and 7 Fr introducers; lengths 120 - 135 and 145 cm. Catheters equipped with a rotational system of atherectomy with continuous active aspiration and the possibility of thrombectomy without catheter change both for soft and hard thrombi and for difficult calcium. Dedicated console supply.

Monorail directional plate endovasal removal system, compatible with 0.014" guide. On the distal end of the catheter is a rotating blade housed in a reservoir that collects the cut plate. The proximal end of the catheter is designed to be inserted into a disposable battery actuator (supplied separately, single-patient or in kit format) that allows the activation of the blade. Available for pots from 1.5 to 7.0 mm, as well as a model specifically indicated for calcific plates, compatible with introducer 6, and 7 Fr.

Thrombosuction SYSTEM consisting of suction pump on loan for free use and accessories (suction tube and liquid collection basket), reperfusion catheter with external diameters of 3F or 8F and respective nitinol separator guide.

Semi-compliant balloon and available with diameter from 4 to 12 mm. Length from 40 to 150 mm and long version up to 250 mm, coated with organic matrix based on Urea and antiproliferative drug (Paclitaxel) with release at inflation (30-60 sec.). Compatibility with guide wire up to 0.035".

Balloon catheter for paclitaxel drug release PTA. Homogeneous balloon coating without polymeric excipients and with a paclitaxel concentration of 2μg/mm2.

OTW catheter, compatible with 0.014", 0.018" and 0.035" guide, with radiopaque markers in Platinum/Iridium.

Non-radiopaque centimeter on the catheter body as a reference tool of the position and reduction of copying times.

Balloon diameters from 1.5 to 12 mm, various lengths up to 220mm and catheter body length 75, 100, 130 or 150 cm.

Paclitaxel drug-eluting PTA catheter, OTW, compatible with 0.14, 0.18 and 0.35 guide wire, equipped with 3 μg/mm2 drug coating with drug transfer within 60 seconds. Available in diameters from 1.5 to 7 mm and with lengths from 40 to 200 mm with shaft lengths from at least 100 to 150 cm.

Limus OTW extended-release PTA medicated balloon catheter, compatible with 0.018" guide wire and 135 cm useful length of almemo. Biodegradable polymer microservoiur technology able to guarantee a pharmacokinetics of at least 30 days. Various lengths, various diameters.

Silicone balloon catheters with controlled compliance for aortic occlusion, from 20 to 40 mm, 65 and 100 cm.

vascular hemostatic closure system. The closure is obtained by means of polypropylene sutures, with two needles. Monorail release device, compatible with 0.035' rail. Surgical knot pre-packed inside. The system must allow the reintroduction of the guide in case of need and the closure of accesses from 6 FR to 10 FR.

Widely compliant occlusion flask designed to fit vessels from 8 mm to 46 mm in diameter, also useful for remodeling abdominal and thoracic endoprostheses.

Catheter for peripheral subintimal recanalization by percutaneous introduction of a 22 gauge needle with a maximum length of 14 mm and .014" guidance. Activation of the needle through a mechanism placed on the handle, proximally. Shaft length: 80 and 120 cm. 5.9 F distal profile and compatible with 6 F feeder

Dual-lumen PTA compatible PTA balloon catheter, OTW (Over-the-Wire) semi-compliant. Diameters from 4mm to 12mm, lengths from 20mm up to 100mm, shaft in three lengths, 40, 80, 135cm. Maximum breaking pressure 24atm. The balloon is folded to 5 folders. Tapered tip of 0.038" compatible with 6Fr and 7 Fr introducer (for diameters from 9mm to 12mm). Indicated for the dilation of stenosis in the iliac, femoral, ilio-femoral, popliteal, infra-popliteal, and renal arteries. It is also indicated for the treatment of native or synthetic obstructive lesions in arteriovenous fistulas, for the post dilation of stents in peripheral arteries.

Catheter for angioplasty of large vessels non-compliant, with Quadrafold inflation technology, diameters from 12 to 18 mm, lengths 20 - 40 and 60 mm, stem 75 and 120 cm, compatible with 0.035" guide and introducers 7 and 8 Fr

Self-expandable nitinol stent with hybrid ring design, for the treatment of venous steno occlusions of the female hemoral iliac tract with flared ends, 6 proximal and distal markers, on 0.035" guide, shaft length 80 cm triaxial, with double speed wheel release system, diameters from 10 to 20 mm, lengths from 40 to 160 mm.

Bioconvertible caval filter complete with positioning system, both jugular and femoris, self-adaptable from 16 mm to 28 mm. Consisting of a cylindrical Nitinol frame and a filtering cone consisting of 6 arms, joined by a bioabsorbable filament. Complete with recovery system, if necessary

Ultra-thin-walled ePTFE-coated peripheral endoprosthesis with stable covalent single-point heparin bond, mounted on self-expandable nitinol external stent with radiopaque markers.

Delivery system compatible with 0.018 or 0.035" guide length 110 cm, with two radiopaque markers on the catheter shaft. Release system with one-step rotating wire

Diameters from 5 to 13 mm with lengths 2.5, 5, 10, 15, 25 cm.

Balloon-expandable peripheral endoprosthesis, covered in ePTFE with stable covalent bond of heparin with single point, consisting of a stainless steel stent with independent rings, pre-mounted on a balloon, 80 or 135 cm release catheter, compatible with 0.035" guide with two radiopaque markers integrated on the catheter shaft.

Diameters from 5 to 11 mm, expandable up to 16 mm and lengths from 15 to 79 mm.

Peripheral stent with expandable balloon covered with double layer of PTFE, CoCr 605. Open cell design with alternating links. 3 tantalum markers at each end of the stent. Diameter sizes 5-10 lengths from 17 to 57mm. Introducer compatibility 6fr up to diameter 8mm, 7f up to diameter 10 mm

Self-expandable Nitinol drug-eluting stent paclitaxel (3 μg/mm2), for the treatment of peripheral vessels (superficial femoral artery and popliteal above the knee), without polymer coating. Triaxial release system available in all sizes, compatible with 6 Fr introducer. Presence of 4 gold markers placed on each end of the stent.

Shaft length: 80 and 125 cm. Stent diameters: 5 mm to 8 mm

Stent lengths: 4 cm to 14 cm

Percutaneous femoral closure system dedicated to the closure of medium and large accesses in percutaneous procedures of EVAR, TEVAR, IMPELLA and ECMO. Sizes 14 and 18 F, for closing holes from 10 up to 25 Fr, with the release of a resorbable patch in the inner wall of the vessel and collagen on the outer surface. Small steel anchor as an angiographic indicator that highlights the correct positioning and position of the device for future punctures on site. Reduced compression time at the end of the procedure.

BTK stent pen, pre-mounted on a ball, in platinum-chromium, Everolimus drug release with polymer, compatible with 0.018" rail. Monorail. Diameters from 2.5 to 4 mm. Lengths from 20 to 38mm.

Covered stent for aorta, pre-mounted on a ball. Structure of the meshes in Cobalt-Chrome, ePTFE coating. Compatible with 0.035 guide. Diameter up to 24 mm. Lengths up to 58mm. Shaft up to 120 cm.

Self-expandable stent in nitinol, with very high radial force and resistance to compression, torsion, tensile and bending stresses. Structure made with 6 filaments, independent and welded together in a single point, in superelastic nitinol alloy arranged in a helical way with braided mesh. OTW release device for 0.018'' guide wire with hydrophilic coating and atraumatic flexible tip. With micrometric release system, Various diamtrei, various lengths.

Self-expandable nitinol stent with dual cell design (open and closed cells) with micrometric triaxial release system, various diameters, lengths up to 200mm, 6Fr compatible, Shaft up to 130 cm

Self-expandable carotid stent with closed cells in chromium cobalt with tantalum core, recaptureable, monorail. Diameters from at least 5mm to a maximum of 10mm and lengths up to 50mm

Self-expandable stent in nitinol with multi-segment structure consisting of crowns of 36 struts (which give rise to 18 "V" segments) interconnected by 6 bridges (1 every 3 "V" segments) without welding to ensure optimal affixing to the wall of the vase. 5 and 6 F profile, catheter length 135 cm, compatibility with .014" guides. Stent lengths: 20-30-40 mm; stent diameters: 5, 6, 7, 8, 9, 10 mm

Self-expandable nitnol carotid stent covered with PET polymer mesh, with pore diameter between 150-180 μm. Diameters from 6-10mm, lengths from 20 to 60mm. Quick exchange release system compatible with 6 FR long introducer.

Cobalt Chrome stents, pre-mounted on a ball. Pre-mounted multilink drawing on a balloon. Double layer L25/PEBAX72D balloon. Monorail version on rail from 0.014 and OTW on rail from 0.035. Diameters from 4 to 10 mm. Stent length from 12 to 59 mm.Compatible with introducer maximum from 6 Fr. Shaft up to 135 cm. Indicated in the treatment of iliac pathology, subclavian artery, visceral branches

Monorail brain protection system on solidarity guide 0.014" peel away with self-adaptable 110 micron dacron filter for pots from 3.5 to 5.5 mm, guide length 190 and 300cm, with the possibility of having additional recovery sheath with 40° tip

Protection filter against distal embolization. Indicated for peripheral, coronary and carotid use. It has the unique characteristic of allowing the crossing of the lesion with a microguide of 0.014in or 0.018in of choice of the operator before its positioning. It consists of a basket for loaded in heparinated Nitinol, equipped with radiopaque markers at both ends as well as a highly radiopaque ring applied to the mouth of the filter to optimize fluoroscopy display.

Extravascular system of closure of femoral access indicated for closures of both arterial and venous accesses. Extravascular closure made by releasing polyethylene glycol plug in and 6 mm semi-compliant flask. Compatible with 5, 6 and 7 F vascular introducer

Brain protective device for carotid stenting with proximal flow block. The system must be equipped with two compliant balloons mounted on a single body for blocking the external carotid artery and the common carotid artery and internal working lumen of at least 5F. Available with 8F and 9F body.

System to provide anchorage and seal between aortic endoprosthesis and native aorta in case of risk of migration or endoleak or in the presence of such a complication. Working length of 114 cm and external diameter of 12 Fr.

Gelatin sponge of animal origin, absorbable, biocompatible, hydrophilic. Packaged in pre-cut cubes in two sizes (2.5 mm and 5.0 mm) and four different weights (25,50,100 mg) in a 10 ml L/L polycarbonate syringe. Indicated for the embolization of blood vessels to occlude blood flow, for the control of bleeding / bleeding.

Biocompatible peripheral embolizing liquid formed from vinyl ethylene alcohol copolymer (EVOH), solvent

DMSO (Dimethylsulfoxide), Tantalum powder micronized to make the liquid radiopaque. Available in

concentrations of 6% and 8% of vinyl ethylene alcohol copolymer. Centrifuge system on loan.

Iodinated PVA polymer agent in injectable precipitation for embolization of peripheral vascular lesions through direct puncture or access with dedicated DMSO compatible catheters performed under angiographic guidance. The embolizing liquid should be ready for use and not give artifacts to follow up.

Spirals with high filling and high thrombogenic power, for peripheral embolization with controlled release. Various diameters and lengths.

Micro and macrospirals, with high thrombogenic power. Various diameters and lengths. RM compatible. Free and controlled release.

Connection tube for angiographic injector

Microspheres x embolization, non-absorbable, hydrophilic, in acrylic copolymer, biocompatible, perfectly calibrated and with controlled compression, guarantee permanent and uniform occlusion of the treated jar, diameters from 40 to 1200 microns, available in preloaded syringes of 1 or 2 ml, or in bottles to be mixed. Availability also Gold type. Certification for use in SFOE and EAP.

Microspheres x embolization, non-absorbable, hydrophilic, in acrylic copolymer, biocompatible, perfectly calibrated and with controlled compression, guarantee permanent and uniform occlusion of the treated jar, diameters from 40 to 1200 microns, available in preloaded syringes of 1 or 2 ml, or in bottles to be mixed. Availability also Gold type. Certification for use in SFOE and EAP.

Bottle with microspheres for chemo-embolization, of super-absorbent poly-copolymer (sodium acrylate vinyl alcohol) for loading chemotherapy drug, with high absorbability of the same inside the spheres,

controlled and prolonged kinetic release of Doxorubicin and Irinotecan, excellent compressibility inside the microcatheter and excellent recovery of shape and size, for a perfect adaptation to the internal lumen of the treated vessel, with consequent uniform and permanent occlusion of the same.

Dehydrated microspheres size 30-60/50-100/100-150/150-200 μ; Size of charged microspheres 120-240/200-400/400-600/600- 800 μ.

Femoral hemostasis device designed to help operators achieve and maintain hemostasis and to ensure patient comfort. The device is safe and effective, significantly decreasing the time spent on manual compression of the access site into the femoral or radial artery after a diagnostic or interventional procedure.

Three-layer hypoallergenic patch with transparent polyurethane bulb which, once inflated with air, guarantees constant and localized pressure on the puncture site, reducing the risk of hematomas formation. The transparent window allows you to constantly monitor the access site, to view any bleeding in real time. The device is inflated through an extension cord with dedicated connection and compatible syringe present in the kit, to ensure maximum patient safety.

Measurements: 12cm – 24cm.

High filling spirals with controlled detachment in platinum alloy with primary diameter 0.020". Equipped with a stretch resistant system consisting of a nitinolo thread along the entire length of the spiral. Available in different configurations and different degrees of softness. Diameters from 2 to 40 mm, lengths from 1 to 60 cm. Immediate controlled mechanical detachment system. Compatible with 0.025" or 0.027" microcatheters.

Self-expanding stent consisting of 48 to 64 intertwined microfilaments in nitinol with platinum inner core for greater radiopacity, Recognizable up to 90% of its length. Compatible with microcatheters from 0.017" to 0.039. Diameters from 2.5mm to 8.0 mm, lengths up to 50mm

Platinum alloy vascular occlusion device with instantaneous mechanical controlled detachment. Consisting of a spirals of primary diameter of 0.020", it has memory of variable shape and degree of softness. The device is equipped with a stretch resistant nitinol system. Compatible with 0.025" or 0.027" microcatheter.sizes from 3 to 14 mm

Radiopaque hydrospheres for embolizations in N-FIL sulfonate, non-absorbable, hydrophilic, precalibrated, in a 10 ml prefilled bottle, with CE mark for loading with DOXORUBICIN and IRINOTECAN and able to release the same with controlled pharmacokinetics in 14 days (Doxo) and to shrink in diameter by about 20% once loaded with drug; Size: 40-90 microns; 70-150 microns (DC Bead M1).

Embolizing particles in calibrated polyvinyl alcohol (PVA) grains, preferably in sterile 2ml vials containing 1cc of dry particles. Size range from minimum 100 to at least 1100 microns.

DOUBLE WAY DRAINS Two-way drainage: one for drainage, one for suction/washing with separate proximal hubs, in soft polyurethane and resistant to kinking. Complete with 0.035" Teflon guide and connector with tap. Different tip configurations available: straight, curved, pig-tail. Diameters: 12-14- 16 Fr, lengths: 18-30 cm.

SET PNX 18 G introducer needle, suitable length. Amplatz Extra Stiff guide wire, 0.038 inch (0.97 mm) stainless steel diameter, suitable length, with 3 mm Safe-T-J tip. Radiopaque dilators, adequate size. Radiopaque chest tube cannula, suitable size. Thal-Quick chest tube in transparent polyvinyl chloride, with radiopaque bands from 10 to 36 Fr. On the distal tract of the chest tube are located large lateral holes.

ENDOLUMINAL BILIARY BIOPSY FORCEPS Kit for transluminal biopsy of the bile ducts with biopsy forceps 5.2 Fr x 60cm with button to open or retract the bite of the distal cup for tissue harvesting. Equipped with reinforced introducer with lateral way of 7 Fr and length 30 cm. Certified for percutaneous use.

Introduction set for biliary access procedures, nephrostomies and abscesses, equipped with 0.018 "x 60 cm guide with platinum tip and a needle for access. 2-piece system with 3Fr x 30 cm dilator and 5Fr x 27cm sheath. Sheath equipped with radiopaque band and hydrophilic coating and simultaneously accepts 0.035" and 0.018" guides.

Percutaneous extravascular access set equipped with: Chiba 22G needle, 6 Fr introducer with 4 Fr dilator. Introducer equipped with radiopaque band and hydrophilic coating and simultaneously accepts 0.035" and 0.018" guides. Complete guide set 0.018", 60 cm in nitinol or steel with platinum tip.