- 2-axle all-wheel drive three-way tipper with loading crane behind the cab
- The driver's cab should be approved for 2 persons
- Motor power of approx. 225 KW
- Operation of the front snow plough and top-mounted spreader (at times also spreading trailer) via a vehicle's own municipal/power hydraulics
- The front axle load and payload must be suitable in the winter period, 0 m3 top-mounted spreader loaded with FS 30,5 t (rear body) and
to record a front snow plough.
- The general equipment and safety marking should comply with the current requirements for vehicles of the road maintenance service according to the StVZO.
- Displacement pulse/signal/ must be stored in the cab as a cable with at least 8 pulses per driving meter, as well as the acceptance of the power supply with a maximum of 30 A/h and standardized device interfaces
- 2-axle all-wheel drive three-way tipper with loading crane behind the cab
- The driver's cab should be approved for 2 persons
- Motor power of approx. 225 KW
- Operation of the front snow plough and top-mounted spreader (at times also spreading trailer) via a vehicle's own municipal/power hydraulics
- The front axle load and payload must be suitable in the winter period, 0 m3 top-mounted spreader loaded with FS 30,5 t (rear body) and
to record a front snow plough.
- The general equipment and safety marking should comply with the current requirements for vehicles of the road maintenance service according to the StVZO.
- Displacement pulse/signal/ must be stored in the cab as a cable with at least 8 pulses per driving meter, as well as the acceptance of the power supply with a maximum of 30 A/h and standardized device interfaces