It is intended to procure a multi-purpose implement carrier including edge strip/guide post mower and rear boom mower. The vehicle is used for all classified roads in the state of Mecklenburg-Western Pomerania. In the summer period, it is mainly used for banquet, trench and embankment mowing. An attachment/edge strip mower including a guide post mower and a boom mower for the rear body is advertised as a front attachment. In addition, typical summer services such as washing guide posts, washing traffic signs, sweeping roads, cutting hedges, etc. are part of the vehicle's intended use.
In the winter period, a front-mounted snow plow (approx. 1.0 t) must be adapted as a front attachment. The operation of a snowblower (approx. 1.3 t) and a trailer spreader/FS30 is planned. Delivery and installation of a torsion frame for load balancing must be checked and planned if necessary.
- Multi-purpose tool carrier with municipal and power hydraulics
- Motor power at least 200 KW
- Device drive via front PTO shaft and municipal/power hydraulics
- A replacement steering/tilting cylinder is not required
- Installation and operation of front and rear-mounted devices
- The front axle load and payload must be suitable to accommodate an approx. 3.0 — 3.5 m3 spreader and a front snow plough (approx. 1.0 t/front attachment) during the winter period, and in individual cases, a snowblower/milling machine (up to approx. 1.3 t/front mounting) instead of a front snow plough. For the time being, however, a trailer spreader is used — a corresponding trailer hitch/trailer load must be offered.
2nd
In summer use, an edge strip mower including a guide post mower is to be operated. A torsion frame for load balancing is only to be planned if necessary
- Hydraulic connections for the 2nd circuit with screw couplings
- A 1/12 volt socket and 2/24 volt sockets are required in the cab (for a mower and, in advance, possibly for a spreader) as well as standardised interfaces for the attachment/mounting devices (UES 6)
- The general equipment and safety marking should meet the requirements imposed on vehicles of the road maintenance service in accordance with the German road traffic regulations.