Please see Section II.2.4.
The Danish Meteorological Institute (DMI) hereby procures an acquisition contract concerning the delivery, installation and commissioning of three (3) dual-pol C-band radars including a radome for each radar.
The acquisition furthermore includes an obligation to deliver spare parts and services, both on site services and a service hotline on a hourly basis. The opportunity of buying spare parts and services is determined to a period of 4 years.
The 3 new radars will replace existing radars in the DMI network, leaving the number of operational weather radars in the resulting DMI network unchanged at five.
The technical requirements for the dual-pol C-band radars are outlined in the Appendix 2 of the contract. This appendix includes several minimum requirements and competitive requirements of which some are weighted higher in terms of evaluation matters.
Please note that the tender material will only be available at the website http://radarproject.dmi.dk. The Tenderer can access and download the material with the following log in information.
— username: ‘wram16tender’
— password: ‘DMIradar16’
The delivery includes:
— three dual-pol C-band radars
— a radome for each radar,
— complete duplicates of the three radar servers for the purpose of back up
— a platform solution for each radar. Please note: DMI prefers the existing platforms to be reused.
— delivery on site
— installation on the on sites mentioned below,
— documentation covering both the hardware and the software
The installation at the three radar sites shall be implemented and completed within the following time windows:
— Installation at Sindal, Teklaborgvej 125, DK-9870 Sindal, Denmark, 1.4.2017 — 20.5.2017
— Installation at Rømø, Vestervej, Juvre, DK-6782 Rømø, Denmark, 20.8.2017 — 15.9.2017
— Installation at Stevns, Mandehoved 10A, Sigerslev, DK-4660 Store Heddinge, Denmark, 1.10.2017 — 27.10.2017
Please note that installation of the radars may not take place at the same time.
DMI will make the sites ready for the radar installations, e.g. remove redundant equipment beforehand.